Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 32 insertions, 0 deletions

diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
new file mode 100644
index 000000000..8e3d355a6
--- /dev/null
+++ b/drivers/firmware/broadcom/Kconfig
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config BCM47XX_NVRAM
+	bool "Broadcom NVRAM driver"
+	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
+	help
+	  Broadcom home routers contain flash partition called "nvram" with all
+	  important hardware configuration as well as some minor user setup.
+	  NVRAM partition contains a text-like data representing name=value
+	  pairs.
+	  This driver provides an easy way to get value of requested parameter.
+	  It simply reads content of NVRAM and parses it. It doesn't control any
+	  hardware part itself.
+
+config BCM47XX_SPROM
+	bool "Broadcom SPROM driver"
+	depends on BCM47XX_NVRAM
+	select GENERIC_NET_UTILS
+	help
+	  Broadcom devices store configuration data in SPROM. Accessing it is
+	  specific to the bus host type, e.g. PCI(e) devices have it mapped in
+	  a PCI BAR.
+	  In case of SoC devices SPROM content is stored on a flash used by
+	  bootloader firmware CFE. This driver provides method to ssb and bcma
+	  drivers to read SPROM on SoC.
+
+config TEE_BNXT_FW
+	tristate "Broadcom BNXT firmware manager"
+	depends on (ARCH_BCM_IPROC && OPTEE) || (COMPILE_TEST && TEE)
+	default ARCH_BCM_IPROC
+	help
+	  This module help to manage firmware on Broadcom BNXT device. The module
+	  registers on tee bus and invoke calls to manage firmware on BNXT device.