ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 314 insertions, 0 deletions

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
new file mode 100644
index 000000000..b7cc11e4f
--- /dev/null
+++ b/drivers/firmware/Kconfig
@@ -0,0 +1,314 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menu "Firmware Drivers"
+
+source "drivers/firmware/arm_scmi/Kconfig"
+
+config ARM_SCPI_PROTOCOL
+	tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on MAILBOX
+	help
+	  System Control and Power Interface (SCPI) Message Protocol is
+	  defined for the purpose of communication between the Application
+	  Cores(AP) and the System Control Processor(SCP). The MHU peripheral
+	  provides a mechanism for inter-processor communication between SCP
+	  and AP.
+
+	  SCP controls most of the power management on the Application
+	  Processors. It offers control and management of: the core/cluster
+	  power states, various power domain DVFS including the core/cluster,
+	  certain system clocks configuration, thermal sensors and many
+	  others.
+
+	  This protocol library provides interface for all the client drivers
+	  making use of the features offered by the SCP.
+
+config ARM_SDE_INTERFACE
+	bool "ARM Software Delegated Exception Interface (SDEI)"
+	depends on ARM64
+	help
+	  The Software Delegated Exception Interface (SDEI) is an ARM
+	  standard for registering callbacks from the platform firmware
+	  into the OS. This is typically used to implement RAS notifications.
+
+config ARM_SDEI_NMI
+	bool "SDEI-based cross-CPU NMI service (arm64)"
+	depends on ARM_SDE_INTERFACE
+	help
+	  Provides SDEI-based cross-CPU NMI delivery for hooks that need
+	  to reach interrupt-masked CPUs on silicon that lacks FEAT_NMI:
+
+	    - arch_trigger_cpumask_backtrace()  (sysrq-l, RCU stalls,
+	      hardlockup_all_cpu_backtrace, soft-lockup secondary dumps,
+	      hung-task auxiliary dumps)
+	    - smp_send_stop() escalation         (reboot/halt and the
+	      panic / kdump crash stop)
+
+	  The driver registers a handler for the SDEI software-signalled
+	  event (event 0) and reaches a target CPU by signalling it with
+	  SDEI_EVENT_SIGNAL. Firmware delivers the event out of EL3
+	  regardless of the target's PSTATE.DAIF -- forced delivery into a
+	  CPU wedged with interrupts locally masked.
+
+	  If unsure, say N.
+
+config EDD
+	tristate "BIOS Enhanced Disk Drive calls determine boot disk"
+	depends on X86
+	help
+	  Say Y or M here if you want to enable BIOS Enhanced Disk Drive
+	  Services real mode BIOS calls to determine which disk
+	  BIOS tries boot from.  This information is then exported via sysfs.
+
+	  This option is experimental and is known to fail to boot on some
+          obscure configurations. Most disk controller BIOS vendors do
+          not yet implement this feature.
+
+config EDD_OFF
+	bool "Sets default behavior for EDD detection to off"
+	depends on EDD
+	default n
+	help
+	  Say Y if you want EDD disabled by default, even though it is compiled into the
+	  kernel. Say N if you want EDD enabled by default. EDD can be dynamically set
+	  using the kernel parameter 'edd={on|skipmbr|off}'.
+
+config FIRMWARE_MEMMAP
+    bool "Add firmware-provided memory map to sysfs" if EXPERT
+    default X86
+    help
+      Add the firmware-provided (unmodified) memory map to /sys/firmware/memmap.
+      That memory map is used for example by kexec to set up parameter area
+      for the next kernel, but can also be used for debugging purposes.
+
+      See also Documentation/ABI/testing/sysfs-firmware-memmap.
+
+config DMIID
+    bool "Export DMI identification via sysfs to userspace"
+    depends on DMI
+    default y
+	help
+	  Say Y here if you want to query SMBIOS/DMI system identification
+	  information from userspace through /sys/class/dmi/id/ or if you want
+	  DMI-based module auto-loading.
+
+config DMI_SYSFS
+	tristate "DMI table support in sysfs"
+	depends on SYSFS && DMI
+	default n
+	help
+	  Say Y or M here to enable the exporting of the raw DMI table
+	  data via sysfs.  This is useful for consuming the data without
+	  requiring any access to /dev/mem at all.  Tables are found
+	  under /sys/firmware/dmi when this option is enabled and
+	  loaded.
+
+config DMI_SCAN_MACHINE_NON_EFI_FALLBACK
+	bool
+
+config ISCSI_IBFT_FIND
+	bool "iSCSI Boot Firmware Table Attributes"
+	depends on X86 && ISCSI_IBFT
+	default n
+	help
+	  This option enables the kernel to find the region of memory
+	  in which the ISCSI Boot Firmware Table (iBFT) resides. This
+	  is necessary for iSCSI Boot Firmware Table Attributes module to work
+	  properly.
+
+config ISCSI_IBFT
+	tristate "iSCSI Boot Firmware Table Attributes module"
+	select ISCSI_BOOT_SYSFS
+	select ISCSI_IBFT_FIND if X86
+	depends on ACPI && SCSI && SCSI_LOWLEVEL
+	default n
+	help
+	  This option enables support for detection and exposing of iSCSI
+	  Boot Firmware Table (iBFT) via sysfs to userspace. If you wish to
+	  detect iSCSI boot parameters dynamically during system boot, say Y.
+	  Otherwise, say N.
+
+config RASPBERRYPI_FIRMWARE
+	tristate "Raspberry Pi Firmware Driver"
+	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on ARM || ARM64
+	depends on MAILBOX
+	default ARCH_BCM2835
+	help
+	  This option enables support for communicating with the firmware on the
+	  Raspberry Pi.
+
+config FW_CFG_SYSFS
+	tristate "QEMU fw_cfg device support in sysfs"
+	depends on SYSFS && (ARM || ARM64 || LOONGARCH || PARISC || PPC_PMAC || RISCV || SPARC || X86)
+	depends on HAS_IOPORT_MAP
+	default n
+	help
+	  Say Y or M here to enable the exporting of the QEMU firmware
+	  configuration (fw_cfg) file entries via sysfs. Entries are
+	  found under /sys/firmware/fw_cfg when this option is enabled
+	  and loaded.
+
+config FW_CFG_SYSFS_CMDLINE
+	bool "QEMU fw_cfg device parameter parsing"
+	depends on FW_CFG_SYSFS
+	help
+	  Allow the qemu_fw_cfg device to be initialized via the kernel
+	  command line or using a module parameter.
+	  WARNING: Using incorrect parameters (base address in particular)
+	  may crash your system.
+
+config INTEL_STRATIX10_SERVICE
+	tristate "Intel Stratix10 Service Layer"
+	depends on ARCH_INTEL_SOCFPGA && ARM64 && HAVE_ARM_SMCCC
+	default n
+	help
+	  Intel Stratix10 service layer runs at privileged exception level,
+	  interfaces with the service providers (FPGA manager is one of them)
+	  and manages secure monitor call to communicate with secure monitor
+	  software at secure monitor exception level.
+
+	  Say Y here if you want Stratix10 service layer support.
+
+config INTEL_STRATIX10_RSU
+	tristate "Intel Stratix10 Remote System Update"
+	depends on INTEL_STRATIX10_SERVICE
+	help
+	  The Intel Remote System Update (RSU) driver exposes interfaces
+	  access through the Intel Service Layer to user space via sysfs
+	  device attribute nodes. The RSU interfaces report/control some of
+	  the optional RSU features of the Stratix 10 SoC FPGA.
+
+	  The RSU provides a way for customers to update the boot
+	  configuration of a Stratix 10 SoC device with significantly reduced
+	  risk of corrupting the bitstream storage and bricking the system.
+
+	  Enable RSU support if you are using an Intel SoC FPGA with the RSU
+	  feature enabled and you want Linux user space control.
+
+	  Say Y here if you want Intel RSU support.
+
+config MTK_ADSP_IPC
+	tristate "MTK ADSP IPC Protocol driver"
+	depends on MTK_ADSP_MBOX
+	help
+	  Say yes here to add support for the MediaTek ADSP IPC
+	  between host AP (Linux) and the firmware running on ADSP.
+	  ADSP exists on some mtk processors.
+	  Client might use shared memory to exchange information with ADSP.
+
+config SYSFB
+	bool
+	select BOOT_VESA_SUPPORT
+	select SCREEN_INFO
+
+config SYSFB_SIMPLEFB
+	bool "Mark VGA/VBE/EFI FB as generic system framebuffer (deprecated)"
+	depends on X86 || EFI
+	select SYSFB
+	help
+	  Firmware often provides initial graphics framebuffers so the BIOS,
+	  bootloader or kernel can show basic video-output during boot for
+	  user-guidance and debugging.
+
+	  This option, if enabled, marks VBE/EFI framebuffers as system
+	  framebuffers so the generic simpledrm driver can be used.
+
+	  This option is deprecated and will be removed in the near future. If
+	  unsure, say N and select efidrm, vesadrm instead. The dedicated DRM
+	  drivers provide the same functionality plus additional features.
+
+config TH1520_AON_PROTOCOL
+	tristate "Always-On firmware protocol"
+	depends on ARCH_THEAD || COMPILE_TEST
+	depends on MAILBOX
+	help
+	  Power, clock, and resource management capabilities on the TH1520 SoC are
+	  managed by the E902 core. Firmware running on this core communicates with
+	  the kernel through the Always-On protocol, using hardware mailbox as a medium.
+	  Say yes if you need such capabilities.
+
+config TI_SCI_PROTOCOL
+	tristate "TI System Control Interface (TISCI) Message Protocol"
+	depends on TI_MESSAGE_MANAGER
+	default ARCH_K3
+	help
+	  TI System Control Interface (TISCI) Message Protocol is used to manage
+	  compute systems such as ARM, DSP etc with the system controller in
+	  complex System on Chip(SoC) such as those found on certain keystone
+	  generation SoC from TI.
+
+	  System controller provides various facilities including power
+	  management function support.
+
+	  This protocol library is used by client drivers to use the features
+	  provided by the system controller.
+
+config TRUSTED_FOUNDATIONS
+	bool "Trusted Foundations secure monitor support"
+	depends on ARM && CPU_V7
+	help
+	  Some devices (including most early Tegra-based consumer devices on
+	  the market) are booted with the Trusted Foundations secure monitor
+	  active, requiring some core operations to be performed by the secure
+	  monitor instead of the kernel.
+
+	  This option allows the kernel to invoke the secure monitor whenever
+	  required on devices using Trusted Foundations. See the functions and
+	  comments in linux/firmware/trusted_foundations.h or the device tree
+	  bindings for "tlm,trusted-foundations" for details on how to use it.
+
+	  Choose N if you don't know what this is about.
+
+config TURRIS_MOX_RWTM
+	tristate "Turris Mox rWTM secure firmware driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on HAS_DMA && OF
+	depends on MAILBOX
+	select HW_RANDOM
+	select ARMADA_37XX_RWTM_MBOX
+	help
+	  This driver communicates with the firmware on the Cortex-M3 secure
+	  processor of the Turris Mox router. Enable if you are building for
+	  Turris Mox, and you will be able to read the device serial number and
+	  other manufacturing data and also utilize the Entropy Bit Generator
+	  for hardware random number generation.
+
+if TURRIS_MOX_RWTM
+
+config TURRIS_MOX_RWTM_KEYCTL
+	bool "Turris Mox rWTM ECDSA message signing"
+	default y
+	depends on KEYS
+	depends on ASYMMETRIC_KEY_TYPE
+	select CZNIC_PLATFORMS
+	select TURRIS_SIGNING_KEY
+	help
+	  Say Y here to add support for ECDSA message signing with board private
+	  key (each Turris Mox has an ECDSA private key generated in the secure
+	  coprocessor when manufactured). This functionality is exposed via the
+	  keyctl() syscall.
+
+endif # TURRIS_MOX_RWTM
+
+source "drivers/firmware/arm_ffa/Kconfig"
+source "drivers/firmware/broadcom/Kconfig"
+source "drivers/firmware/cirrus/Kconfig"
+source "drivers/firmware/google/Kconfig"
+source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/imx/Kconfig"
+source "drivers/firmware/meson/Kconfig"
+source "drivers/firmware/microchip/Kconfig"
+source "drivers/firmware/psci/Kconfig"
+source "drivers/firmware/qcom/Kconfig"
+source "drivers/firmware/samsung/Kconfig"
+source "drivers/firmware/smccc/Kconfig"
+source "drivers/firmware/tegra/Kconfig"
+source "drivers/firmware/xilinx/Kconfig"
+
+endmenu