drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 218 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
new file mode 100644
index 000000000..3c522c9c9
--- /dev/null
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
+ *			and VBUS detection based on extcon-usb-gpio.c.
+ *
+ * Copyright (C) 2016 Linaro, Ltd.
+ * Stephen Boyd <stephen.boyd@linaro.org>
+ */
+
+#include <linux/devm-helpers.h>
+#include <linux/extcon-provider.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define USB_ID_DEBOUNCE_MS	5	/* ms */
+
+struct qcom_usb_extcon_info {
+	struct extcon_dev *edev;
+	int id_irq;
+	int vbus_irq;
+	struct delayed_work wq_detcable;
+	unsigned long debounce_jiffies;
+};
+
+static const unsigned int qcom_usb_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static void qcom_usb_extcon_detect_cable(struct work_struct *work)
+{
+	bool state = false;
+	int ret;
+	union extcon_property_value val;
+	struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
+						    struct qcom_usb_extcon_info,
+						    wq_detcable);
+
+	if (info->id_irq > 0) {
+		/* check ID and update cable state */
+		ret = irq_get_irqchip_state(info->id_irq,
+				IRQCHIP_STATE_LINE_LEVEL, &state);
+		if (ret)
+			return;
+
+		if (!state) {
+			val.intval = true;
+			extcon_set_property(info->edev, EXTCON_USB_HOST,
+						EXTCON_PROP_USB_SS, val);
+		}
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
+	}
+
+	if (info->vbus_irq > 0) {
+		/* check VBUS and update cable state */
+		ret = irq_get_irqchip_state(info->vbus_irq,
+				IRQCHIP_STATE_LINE_LEVEL, &state);
+		if (ret)
+			return;
+
+		if (state) {
+			val.intval = true;
+			extcon_set_property(info->edev, EXTCON_USB,
+						EXTCON_PROP_USB_SS, val);
+		}
+		extcon_set_state_sync(info->edev, EXTCON_USB, state);
+	}
+}
+
+static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
+{
+	struct qcom_usb_extcon_info *info = dev_id;
+
+	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+			   info->debounce_jiffies);
+
+	return IRQ_HANDLED;
+}
+
+static int qcom_usb_extcon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct qcom_usb_extcon_info *info;
+	int ret;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->edev = devm_extcon_dev_allocate(dev, qcom_usb_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(dev, "failed to allocate extcon device\n");
+		return -ENOMEM;
+	}
+
+	ret = devm_extcon_dev_register(dev, info->edev);
+	if (ret < 0) {
+		dev_err(dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	ret = extcon_set_property_capability(info->edev,
+			EXTCON_USB, EXTCON_PROP_USB_SS);
+	ret |= extcon_set_property_capability(info->edev,
+			EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
+	if (ret) {
+		dev_err(dev, "failed to register extcon props rc=%d\n",
+						ret);
+		return ret;
+	}
+
+	info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
+
+	ret = devm_delayed_work_autocancel(dev, &info->wq_detcable,
+					   qcom_usb_extcon_detect_cable);
+	if (ret)
+		return ret;
+
+	info->id_irq = platform_get_irq_byname_optional(pdev, "usb_id");
+	if (info->id_irq > 0) {
+		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+					qcom_usb_irq_handler,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request handler for ID IRQ\n");
+			return ret;
+		}
+	}
+
+	info->vbus_irq = platform_get_irq_byname_optional(pdev, "usb_vbus");
+	if (info->vbus_irq > 0) {
+		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
+					qcom_usb_irq_handler,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request handler for VBUS IRQ\n");
+			return ret;
+		}
+	}
+
+	if (info->id_irq < 0 && info->vbus_irq < 0) {
+		dev_err(dev, "ID and VBUS IRQ not found\n");
+		return -EINVAL;
+	}
+
+	platform_set_drvdata(pdev, info);
+	devm_device_init_wakeup(dev);
+
+	/* Perform initial detection */
+	qcom_usb_extcon_detect_cable(&info->wq_detcable.work);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qcom_usb_extcon_suspend(struct device *dev)
+{
+	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (device_may_wakeup(dev)) {
+		if (info->id_irq > 0)
+			ret = enable_irq_wake(info->id_irq);
+		if (info->vbus_irq > 0)
+			ret = enable_irq_wake(info->vbus_irq);
+	}
+
+	return ret;
+}
+
+static int qcom_usb_extcon_resume(struct device *dev)
+{
+	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (device_may_wakeup(dev)) {
+		if (info->id_irq > 0)
+			ret = disable_irq_wake(info->id_irq);
+		if (info->vbus_irq > 0)
+			ret = disable_irq_wake(info->vbus_irq);
+	}
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qcom_usb_extcon_pm_ops,
+			 qcom_usb_extcon_suspend, qcom_usb_extcon_resume);
+
+static const struct of_device_id qcom_usb_extcon_dt_match[] = {
+	{ .compatible = "qcom,pm8941-misc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
+
+static struct platform_driver qcom_usb_extcon_driver = {
+	.probe		= qcom_usb_extcon_probe,
+	.driver		= {
+		.name	= "extcon-pm8941-misc",
+		.pm	= &qcom_usb_extcon_pm_ops,
+		.of_match_table = qcom_usb_extcon_dt_match,
+	},
+};
+module_platform_driver(qcom_usb_extcon_driver);
+
+MODULE_DESCRIPTION("QCOM USB ID extcon driver");
+MODULE_AUTHOR("Stephen Boyd <stephen.boyd@linaro.org>");
+MODULE_LICENSE("GPL v2");