Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 284 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-intel-mrfld.c b/drivers/extcon/extcon-intel-mrfld.c
new file mode 100644
index 000000000..7246d704f
--- /dev/null
+++ b/drivers/extcon/extcon-intel-mrfld.c
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * extcon driver for Basin Cove PMIC
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "extcon-intel.h"
+
+#define BCOVE_USBIDCTRL			0x19
+#define BCOVE_USBIDCTRL_ID		BIT(0)
+#define BCOVE_USBIDCTRL_ACA		BIT(1)
+#define BCOVE_USBIDCTRL_ALL	(BCOVE_USBIDCTRL_ID | BCOVE_USBIDCTRL_ACA)
+
+#define BCOVE_USBIDSTS			0x1a
+#define BCOVE_USBIDSTS_GND		BIT(0)
+#define BCOVE_USBIDSTS_RARBRC_MASK	GENMASK(2, 1)
+#define BCOVE_USBIDSTS_RARBRC_SHIFT	1
+#define BCOVE_USBIDSTS_NO_ACA		0
+#define BCOVE_USBIDSTS_R_ID_A		1
+#define BCOVE_USBIDSTS_R_ID_B		2
+#define BCOVE_USBIDSTS_R_ID_C		3
+#define BCOVE_USBIDSTS_FLOAT		BIT(3)
+#define BCOVE_USBIDSTS_SHORT		BIT(4)
+
+#define BCOVE_CHGRIRQ_ALL	(BCOVE_CHGRIRQ_VBUSDET | BCOVE_CHGRIRQ_DCDET | \
+				 BCOVE_CHGRIRQ_BATTDET | BCOVE_CHGRIRQ_USBIDDET)
+
+#define BCOVE_CHGRCTRL0			0x4b
+#define BCOVE_CHGRCTRL0_CHGRRESET	BIT(0)
+#define BCOVE_CHGRCTRL0_EMRGCHREN	BIT(1)
+#define BCOVE_CHGRCTRL0_EXTCHRDIS	BIT(2)
+#define BCOVE_CHGRCTRL0_SWCONTROL	BIT(3)
+#define BCOVE_CHGRCTRL0_TTLCK		BIT(4)
+#define BCOVE_CHGRCTRL0_BIT_5		BIT(5)
+#define BCOVE_CHGRCTRL0_BIT_6		BIT(6)
+#define BCOVE_CHGRCTRL0_CHR_WDT_NOKICK	BIT(7)
+
+struct mrfld_extcon_data {
+	struct device *dev;
+	struct regmap *regmap;
+	struct extcon_dev *edev;
+	unsigned int status;
+	unsigned int id;
+};
+
+static const unsigned int mrfld_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_CDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_CHG_USB_ACA,
+	EXTCON_NONE,
+};
+
+static int mrfld_extcon_clear(struct mrfld_extcon_data *data, unsigned int reg,
+			      unsigned int mask)
+{
+	return regmap_update_bits(data->regmap, reg, mask, 0x00);
+}
+
+static int mrfld_extcon_set(struct mrfld_extcon_data *data, unsigned int reg,
+			    unsigned int mask)
+{
+	return regmap_update_bits(data->regmap, reg, mask, 0xff);
+}
+
+static int mrfld_extcon_sw_control(struct mrfld_extcon_data *data, bool enable)
+{
+	unsigned int mask = BCOVE_CHGRCTRL0_SWCONTROL;
+	struct device *dev = data->dev;
+	int ret;
+
+	if (enable)
+		ret = mrfld_extcon_set(data, BCOVE_CHGRCTRL0, mask);
+	else
+		ret = mrfld_extcon_clear(data, BCOVE_CHGRCTRL0, mask);
+	if (ret)
+		dev_err(dev, "can't set SW control: %d\n", ret);
+	return ret;
+}
+
+static int mrfld_extcon_get_id(struct mrfld_extcon_data *data)
+{
+	struct regmap *regmap = data->regmap;
+	unsigned int id;
+	bool ground;
+	int ret;
+
+	ret = regmap_read(regmap, BCOVE_USBIDSTS, &id);
+	if (ret)
+		return ret;
+
+	if (id & BCOVE_USBIDSTS_FLOAT)
+		return INTEL_USB_ID_FLOAT;
+
+	switch ((id & BCOVE_USBIDSTS_RARBRC_MASK) >> BCOVE_USBIDSTS_RARBRC_SHIFT) {
+	case BCOVE_USBIDSTS_R_ID_A:
+		return INTEL_USB_RID_A;
+	case BCOVE_USBIDSTS_R_ID_B:
+		return INTEL_USB_RID_B;
+	case BCOVE_USBIDSTS_R_ID_C:
+		return INTEL_USB_RID_C;
+	}
+
+	/*
+	 * PMIC A0 reports USBIDSTS_GND = 1 for ID_GND,
+	 * but PMIC B0 reports USBIDSTS_GND = 0 for ID_GND.
+	 * Thus we must check this bit at last.
+	 */
+	ground = id & BCOVE_USBIDSTS_GND;
+	switch ('A' + BCOVE_MAJOR(data->id)) {
+	case 'A':
+		return ground ? INTEL_USB_ID_GND : INTEL_USB_ID_FLOAT;
+	case 'B':
+		return ground ? INTEL_USB_ID_FLOAT : INTEL_USB_ID_GND;
+	}
+
+	/* Unknown or unsupported type */
+	return INTEL_USB_ID_FLOAT;
+}
+
+static int mrfld_extcon_role_detect(struct mrfld_extcon_data *data)
+{
+	unsigned int id;
+	bool usb_host;
+	int ret;
+
+	ret = mrfld_extcon_get_id(data);
+	if (ret < 0)
+		return ret;
+
+	id = ret;
+
+	usb_host = (id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A);
+	extcon_set_state_sync(data->edev, EXTCON_USB_HOST, usb_host);
+
+	return 0;
+}
+
+static int mrfld_extcon_cable_detect(struct mrfld_extcon_data *data)
+{
+	struct regmap *regmap = data->regmap;
+	unsigned int status, change;
+	int ret;
+
+	/*
+	 * It seems SCU firmware clears the content of BCOVE_CHGRIRQ1
+	 * and makes it useless for OS. Instead we compare a previously
+	 * stored status to the current one, provided by BCOVE_SCHGRIRQ1.
+	 */
+	ret = regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+	if (ret)
+		return ret;
+
+	change = status ^ data->status;
+	if (!change)
+		return -ENODATA;
+
+	if (change & BCOVE_CHGRIRQ_USBIDDET) {
+		ret = mrfld_extcon_role_detect(data);
+		if (ret)
+			return ret;
+	}
+
+	data->status = status;
+
+	return 0;
+}
+
+static irqreturn_t mrfld_extcon_interrupt(int irq, void *dev_id)
+{
+	struct mrfld_extcon_data *data = dev_id;
+	int ret;
+
+	ret = mrfld_extcon_cable_detect(data);
+
+	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
+
+	return ret ? IRQ_NONE: IRQ_HANDLED;
+}
+
+static int mrfld_extcon_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct regmap *regmap = pmic->regmap;
+	struct mrfld_extcon_data *data;
+	unsigned int status;
+	unsigned int id;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+	data->regmap = regmap;
+
+	data->edev = devm_extcon_dev_allocate(dev, mrfld_extcon_cable);
+	if (IS_ERR(data->edev))
+		return PTR_ERR(data->edev);
+
+	ret = devm_extcon_dev_register(dev, data->edev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "can't register extcon device\n");
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_extcon_interrupt,
+					IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+					data);
+	if (ret)
+		return dev_err_probe(dev, ret, "can't register IRQ handler\n");
+
+	ret = regmap_read(regmap, BCOVE_ID, &id);
+	if (ret)
+		return dev_err_probe(dev, ret, "can't read PMIC ID\n");
+
+	data->id = id;
+
+	ret = mrfld_extcon_sw_control(data, true);
+	if (ret)
+		return ret;
+
+	/* Get initial state */
+	mrfld_extcon_role_detect(data);
+
+	/*
+	 * Cached status value is used for cable detection, see comments
+	 * in mrfld_extcon_cable_detect(), we need to sync cached value
+	 * with a real state of the hardware.
+	 */
+	regmap_read(regmap, BCOVE_SCHGRIRQ1, &status);
+	data->status = status;
+
+	mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR);
+	mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL);
+
+	mrfld_extcon_set(data, BCOVE_USBIDCTRL, BCOVE_USBIDCTRL_ALL);
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static void mrfld_extcon_remove(struct platform_device *pdev)
+{
+	struct mrfld_extcon_data *data = platform_get_drvdata(pdev);
+
+	mrfld_extcon_sw_control(data, false);
+}
+
+static const struct platform_device_id mrfld_extcon_id_table[] = {
+	{ .name = "mrfld_bcove_pwrsrc" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_extcon_id_table);
+
+static struct platform_driver mrfld_extcon_driver = {
+	.driver = {
+		.name	= "mrfld_bcove_pwrsrc",
+	},
+	.probe		= mrfld_extcon_probe,
+	.remove		= mrfld_extcon_remove,
+	.id_table	= mrfld_extcon_id_table,
+};
+module_platform_driver(mrfld_extcon_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("extcon driver for Intel Merrifield Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");