Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 217 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
new file mode 100644
index 000000000..7d16d5b7d
--- /dev/null
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel INT3496 ACPI device extcon driver
+ *
+ * Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Based on android x86 kernel code which is:
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ * Author: David Cohen <david.a.cohen@linux.intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/devm-helpers.h>
+#include <linux/extcon-provider.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define INT3496_GPIO_USB_ID	0
+#define INT3496_GPIO_VBUS_EN	1
+#define INT3496_GPIO_USB_MUX	2
+#define DEBOUNCE_TIME		msecs_to_jiffies(50)
+
+struct int3496_data {
+	struct device *dev;
+	struct extcon_dev *edev;
+	struct delayed_work work;
+	struct gpio_desc *gpio_usb_id;
+	struct gpio_desc *gpio_vbus_en;
+	struct gpio_desc *gpio_usb_mux;
+	struct regulator *vbus_boost;
+	int usb_id_irq;
+	bool vbus_boost_enabled;
+};
+
+static const unsigned int int3496_cable[] = {
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
+};
+
+static const struct acpi_gpio_params id_gpios = { INT3496_GPIO_USB_ID, 0, false };
+static const struct acpi_gpio_params vbus_gpios = { INT3496_GPIO_VBUS_EN, 0, false };
+static const struct acpi_gpio_params mux_gpios = { INT3496_GPIO_USB_MUX, 0, false };
+
+static const struct acpi_gpio_mapping acpi_int3496_default_gpios[] = {
+	/*
+	 * Some platforms have a bug in ACPI GPIO description making IRQ
+	 * GPIO to be output only. Ask the GPIO core to ignore this limit.
+	 */
+	{ "id-gpios", &id_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
+	{ "vbus-gpios", &vbus_gpios, 1 },
+	{ "mux-gpios", &mux_gpios, 1 },
+	{ },
+};
+
+static void int3496_set_vbus_boost(struct int3496_data *data, bool enable)
+{
+	int ret;
+
+	if (IS_ERR_OR_NULL(data->vbus_boost))
+		return;
+
+	if (data->vbus_boost_enabled == enable)
+		return;
+
+	if (enable)
+		ret = regulator_enable(data->vbus_boost);
+	else
+		ret = regulator_disable(data->vbus_boost);
+
+	if (ret == 0)
+		data->vbus_boost_enabled = enable;
+	else
+		dev_err(data->dev, "Error updating Vbus boost regulator: %d\n", ret);
+}
+
+static void int3496_do_usb_id(struct work_struct *work)
+{
+	struct int3496_data *data =
+		container_of(work, struct int3496_data, work.work);
+	int id = gpiod_get_value_cansleep(data->gpio_usb_id);
+
+	/* id == 1: PERIPHERAL, id == 0: HOST */
+	dev_dbg(data->dev, "Connected %s cable\n", id ? "PERIPHERAL" : "HOST");
+
+	/*
+	 * Peripheral: set USB mux to peripheral and disable VBUS
+	 * Host: set USB mux to host and enable VBUS
+	 */
+	if (!IS_ERR(data->gpio_usb_mux))
+		gpiod_direction_output(data->gpio_usb_mux, id);
+
+	if (!IS_ERR(data->gpio_vbus_en))
+		gpiod_direction_output(data->gpio_vbus_en, !id);
+	else
+		int3496_set_vbus_boost(data, !id);
+
+	extcon_set_state_sync(data->edev, EXTCON_USB_HOST, !id);
+}
+
+static irqreturn_t int3496_thread_isr(int irq, void *priv)
+{
+	struct int3496_data *data = priv;
+
+	/* Let the pin settle before processing it */
+	mod_delayed_work(system_percpu_wq, &data->work, DEBOUNCE_TIME);
+
+	return IRQ_HANDLED;
+}
+
+static int int3496_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct int3496_data *data;
+	int ret;
+
+	if (has_acpi_companion(dev)) {
+		ret = devm_acpi_dev_add_driver_gpios(dev, acpi_int3496_default_gpios);
+		if (ret) {
+			dev_err(dev, "can't add GPIO ACPI mapping\n");
+			return ret;
+		}
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = dev;
+	ret = devm_delayed_work_autocancel(dev, &data->work, int3496_do_usb_id);
+	if (ret)
+		return ret;
+
+	data->gpio_usb_id =
+		devm_gpiod_get(dev, "id", GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
+	if (IS_ERR(data->gpio_usb_id)) {
+		ret = PTR_ERR(data->gpio_usb_id);
+		dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
+		return ret;
+	}
+
+	data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
+	if (data->usb_id_irq < 0) {
+		dev_err(dev, "can't get USB ID IRQ: %d\n", data->usb_id_irq);
+		return data->usb_id_irq;
+	}
+
+	data->gpio_vbus_en = devm_gpiod_get(dev, "vbus", GPIOD_ASIS);
+	if (IS_ERR(data->gpio_vbus_en)) {
+		dev_dbg(dev, "can't request VBUS EN GPIO\n");
+		data->vbus_boost = devm_regulator_get_optional(dev, "vbus");
+	}
+
+	data->gpio_usb_mux = devm_gpiod_get(dev, "mux", GPIOD_ASIS);
+	if (IS_ERR(data->gpio_usb_mux))
+		dev_dbg(dev, "can't request USB MUX GPIO\n");
+
+	/* register extcon device */
+	data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
+	if (IS_ERR(data->edev))
+		return -ENOMEM;
+
+	ret = devm_extcon_dev_register(dev, data->edev);
+	if (ret < 0) {
+		dev_err(dev, "can't register extcon device: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(dev, data->usb_id_irq,
+					NULL, int3496_thread_isr,
+					IRQF_SHARED | IRQF_ONESHOT |
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					dev_name(dev), data);
+	if (ret < 0) {
+		dev_err(dev, "can't request IRQ for USB ID GPIO: %d\n", ret);
+		return ret;
+	}
+
+	/* process id-pin so that we start with the right status */
+	queue_delayed_work(system_percpu_wq, &data->work, 0);
+	flush_delayed_work(&data->work);
+
+	platform_set_drvdata(pdev, data);
+
+	return 0;
+}
+
+static const struct acpi_device_id int3496_acpi_match[] = {
+	{ "INT3496" },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, int3496_acpi_match);
+
+static const struct platform_device_id int3496_ids[] = {
+	{ .name = "intel-int3496" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, int3496_ids);
+
+static struct platform_driver int3496_driver = {
+	.driver = {
+		.name = "intel-int3496",
+		.acpi_match_table = int3496_acpi_match,
+	},
+	.probe = int3496_probe,
+	.id_table = int3496_ids,
+};
+
+module_platform_driver(int3496_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Intel INT3496 ACPI device extcon driver");
+MODULE_LICENSE("GPL v2");