Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 55 insertions, 0 deletions

diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
new file mode 100644
index 000000000..c71b0b5d5
--- /dev/null
+++ b/drivers/dma/qcom/Kconfig
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config QCOM_ADM
+	tristate "Qualcomm ADM support"
+	depends on (ARCH_QCOM || COMPILE_TEST) && !PHYS_ADDR_T_64BIT
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for the Qualcomm Application Data Mover (ADM) DMA
+	  controller, as present on MSM8x60, APQ8064, and IPQ8064 devices.
+	  This controller provides DMA capabilities for both general purpose
+	  and on-chip peripheral devices.
+
+config QCOM_BAM_DMA
+	tristate "Qualcomm BAM DMA support"
+	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for the QCOM BAM DMA controller.  This controller
+	  provides DMA capabilities for a variety of on-chip devices.
+
+config QCOM_GPI_DMA
+        tristate "Qualcomm GPI DMA support"
+        depends on ARCH_QCOM
+        select DMA_ENGINE
+        select DMA_VIRTUAL_CHANNELS
+        help
+          Enable support for the QCOM GPI DMA controller. This controller
+          provides DMA capabilities for a variety of peripheral buses such
+          as I2C, UART, and SPI. By using GPI dmaengine driver, bus drivers
+          can use a standardize interface that is protocol independent to
+          transfer data between DDR and peripheral.
+
+config QCOM_HIDMA_MGMT
+	tristate "Qualcomm HIDMA Management support"
+	depends on HAS_IOMEM
+	select DMA_ENGINE
+	help
+	  Enable support for the Qualcomm Technologies HIDMA Management.
+	  Each DMA device requires one management interface driver
+	  for basic initialization before QCOM_HIDMA channel driver can
+	  start managing the channels. In a virtualized environment,
+	  the guest OS would run QCOM_HIDMA channel driver and the
+	  host would run the QCOM_HIDMA_MGMT management driver.
+
+config QCOM_HIDMA
+	tristate "Qualcomm HIDMA Channel support"
+	depends on HAS_IOMEM
+	select DMA_ENGINE
+	help
+	  Enable support for the Qualcomm Technologies HIDMA controller.
+	  The HIDMA controller supports optimized buffer copies
+	  (user to kernel, kernel to kernel, etc.).  It only supports
+	  memcpy interface. The core is not intended for general
+	  purpose slave DMA.