ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 135 insertions, 0 deletions

diff --git a/drivers/dma/hsu/pci.c b/drivers/dma/hsu/pci.c
new file mode 100644
index 000000000..0fcc0c0c2
--- /dev/null
+++ b/drivers/dma/hsu/pci.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCI driver for the High Speed UART DMA
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * Partially based on the bits found in drivers/tty/serial/mfd.c.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "hsu.h"
+
+#define HSU_PCI_DMASR		0x00
+#define HSU_PCI_DMAISR		0x04
+
+#define HSU_PCI_CHAN_OFFSET	0x100
+
+#define PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA	0x081e
+#define PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA	0x1192
+
+static irqreturn_t hsu_pci_irq(int irq, void *dev)
+{
+	struct hsu_dma_chip *chip = dev;
+	unsigned long dmaisr;
+	unsigned short i;
+	u32 status;
+	int ret = 0;
+	int err;
+
+	dmaisr = readl(chip->regs + HSU_PCI_DMAISR);
+	for_each_set_bit(i, &dmaisr, chip->hsu->nr_channels) {
+		err = hsu_dma_get_status(chip, i, &status);
+		if (err > 0)
+			ret |= 1;
+		else if (err == 0)
+			ret |= hsu_dma_do_irq(chip, i, status);
+	}
+
+	return IRQ_RETVAL(ret);
+}
+
+static void hsu_pci_dma_remove(void *chip)
+{
+	hsu_dma_remove(chip);
+}
+
+static int hsu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct device *dev = &pdev->dev;
+	struct hsu_dma_chip *chip;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+	if (ret) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		return ret;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (ret < 0)
+		return ret;
+
+	chip->dev = &pdev->dev;
+	chip->regs = pcim_iomap_table(pdev)[0];
+	chip->length = pci_resource_len(pdev, 0);
+	chip->offset = HSU_PCI_CHAN_OFFSET;
+	chip->irq = pci_irq_vector(pdev, 0);
+
+	ret = hsu_dma_probe(chip);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, hsu_pci_dma_remove, chip);
+	if (ret)
+		return ret;
+
+	ret = devm_request_irq(dev, chip->irq, hsu_pci_irq, 0, "hsu_dma_pci", chip);
+	if (ret)
+		return ret;
+
+	/*
+	 * On Intel Tangier B0 and Anniedale the interrupt line, disregarding
+	 * to have different numbers, is shared between HSU DMA and UART IPs.
+	 * Thus on such SoCs we are expecting that IRQ handler is called in
+	 * UART driver only. Instead of handling the spurious interrupt
+	 * from HSU DMA here and waste CPU time and delay HSU UART interrupt
+	 * handling, disable the interrupt entirely.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA)
+		disable_irq_nosync(chip->irq);
+
+	pci_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static const struct pci_device_id hsu_pci_id_table[] = {
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MFLD_HSU_DMA), 0 },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD_HSU_DMA), 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, hsu_pci_id_table);
+
+static struct pci_driver hsu_pci_driver = {
+	.name		= "hsu_dma_pci",
+	.id_table	= hsu_pci_id_table,
+	.probe		= hsu_pci_probe,
+};
+
+module_pci_driver(hsu_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("High Speed UART DMA PCI driver");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");