x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 248 insertions, 0 deletions

diff --git a/drivers/dma-buf/dma-buf-mapping.c b/drivers/dma-buf/dma-buf-mapping.c
new file mode 100644
index 000000000..794acff25
--- /dev/null
+++ b/drivers/dma-buf/dma-buf-mapping.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * DMA BUF Mapping Helpers
+ *
+ */
+#include <linux/dma-buf-mapping.h>
+#include <linux/dma-resv.h>
+
+static struct scatterlist *fill_sg_entry(struct scatterlist *sgl, size_t length,
+					 dma_addr_t addr)
+{
+	unsigned int len, nents;
+	int i;
+
+	nents = DIV_ROUND_UP(length, UINT_MAX);
+	for (i = 0; i < nents; i++) {
+		len = min_t(size_t, length, UINT_MAX);
+		length -= len;
+		/*
+		 * DMABUF abuses scatterlist to create a scatterlist
+		 * that does not have any CPU list, only the DMA list.
+		 * Always set the page related values to NULL to ensure
+		 * importers can't use it. The phys_addr based DMA API
+		 * does not require the CPU list for mapping or unmapping.
+		 */
+		sg_set_page(sgl, NULL, 0, 0);
+		sg_dma_address(sgl) = addr + (dma_addr_t)i * UINT_MAX;
+		sg_dma_len(sgl) = len;
+		sgl = sg_next(sgl);
+	}
+
+	return sgl;
+}
+
+static unsigned int calc_sg_nents(struct dma_iova_state *state,
+				  struct phys_vec *phys_vec, size_t nr_ranges,
+				  size_t size)
+{
+	unsigned int nents = 0;
+	size_t i;
+
+	if (!state || !dma_use_iova(state)) {
+		for (i = 0; i < nr_ranges; i++)
+			nents += DIV_ROUND_UP(phys_vec[i].len, UINT_MAX);
+	} else {
+		/*
+		 * In IOVA case, there is only one SG entry which spans
+		 * for whole IOVA address space, but we need to make sure
+		 * that it fits sg->length, maybe we need more.
+		 */
+		nents = DIV_ROUND_UP(size, UINT_MAX);
+	}
+
+	return nents;
+}
+
+/**
+ * struct dma_buf_dma - holds DMA mapping information
+ * @sgt:    Scatter-gather table
+ * @state:  DMA IOVA state relevant in IOMMU-based DMA
+ * @size:   Total size of DMA transfer
+ */
+struct dma_buf_dma {
+	struct sg_table sgt;
+	struct dma_iova_state *state;
+	size_t size;
+};
+
+/**
+ * dma_buf_phys_vec_to_sgt - Returns the scatterlist table of the attachment
+ * from arrays of physical vectors. This funciton is intended for MMIO memory
+ * only.
+ * @attach:	[in]	attachment whose scatterlist is to be returned
+ * @provider:	[in]	p2pdma provider
+ * @phys_vec:	[in]	array of physical vectors
+ * @nr_ranges:	[in]	number of entries in phys_vec array
+ * @size:	[in]	total size of phys_vec
+ * @dir:	[in]	direction of DMA transfer
+ *
+ * Returns sg_table containing the scatterlist to be returned; returns ERR_PTR
+ * on error. May return -EINTR if it is interrupted by a signal.
+ *
+ * On success, the DMA addresses and lengths in the returned scatterlist are
+ * PAGE_SIZE aligned.
+ *
+ * A mapping must be unmapped by using dma_buf_free_sgt().
+ *
+ * NOTE: This function is intended for exporters. If direct traffic routing is
+ * mandatory exporter should call routing pci_p2pdma_map_type() before calling
+ * this function.
+ */
+struct sg_table *dma_buf_phys_vec_to_sgt(struct dma_buf_attachment *attach,
+					 struct p2pdma_provider *provider,
+					 struct phys_vec *phys_vec,
+					 size_t nr_ranges, size_t size,
+					 enum dma_data_direction dir)
+{
+	unsigned int nents, mapped_len = 0;
+	struct dma_buf_dma *dma;
+	struct scatterlist *sgl;
+	dma_addr_t addr;
+	size_t i;
+	int ret;
+
+	dma_resv_assert_held(attach->dmabuf->resv);
+
+	if (WARN_ON(!attach || !attach->dmabuf || !provider))
+		/* This function is supposed to work on MMIO memory only */
+		return ERR_PTR(-EINVAL);
+
+	dma = kzalloc_obj(*dma);
+	if (!dma)
+		return ERR_PTR(-ENOMEM);
+
+	switch (pci_p2pdma_map_type(provider, attach->dev)) {
+	case PCI_P2PDMA_MAP_BUS_ADDR:
+		/*
+		 * There is no need in IOVA at all for this flow.
+		 */
+		break;
+	case PCI_P2PDMA_MAP_THRU_HOST_BRIDGE:
+		dma->state = kzalloc_obj(*dma->state);
+		if (!dma->state) {
+			ret = -ENOMEM;
+			goto err_free_dma;
+		}
+
+		dma_iova_try_alloc(attach->dev, dma->state, 0, size);
+		break;
+	default:
+		ret = -EINVAL;
+		goto err_free_dma;
+	}
+
+	nents = calc_sg_nents(dma->state, phys_vec, nr_ranges, size);
+	ret = sg_alloc_table(&dma->sgt, nents, GFP_KERNEL | __GFP_ZERO);
+	if (ret)
+		goto err_free_state;
+
+	sgl = dma->sgt.sgl;
+
+	for (i = 0; i < nr_ranges; i++) {
+		if (!dma->state) {
+			addr = pci_p2pdma_bus_addr_map(provider,
+						       phys_vec[i].paddr);
+		} else if (dma_use_iova(dma->state)) {
+			ret = dma_iova_link(attach->dev, dma->state,
+					    phys_vec[i].paddr, 0,
+					    phys_vec[i].len, dir,
+					    DMA_ATTR_MMIO);
+			if (ret)
+				goto err_unmap_dma;
+
+			mapped_len += phys_vec[i].len;
+		} else {
+			addr = dma_map_phys(attach->dev, phys_vec[i].paddr,
+					    phys_vec[i].len, dir,
+					    DMA_ATTR_MMIO);
+			ret = dma_mapping_error(attach->dev, addr);
+			if (ret)
+				goto err_unmap_dma;
+		}
+
+		if (!dma->state || !dma_use_iova(dma->state))
+			sgl = fill_sg_entry(sgl, phys_vec[i].len, addr);
+	}
+
+	if (dma->state && dma_use_iova(dma->state)) {
+		WARN_ON_ONCE(mapped_len != size);
+		ret = dma_iova_sync(attach->dev, dma->state, 0, mapped_len);
+		if (ret)
+			goto err_unmap_dma;
+
+		sgl = fill_sg_entry(sgl, mapped_len, dma->state->addr);
+	}
+
+	dma->size = size;
+
+	/*
+	 * No CPU list included — set orig_nents = 0 so others can detect
+	 * this via SG table (use nents only).
+	 */
+	dma->sgt.orig_nents = 0;
+
+
+	/*
+	 * SGL must be NULL to indicate that SGL is the last one
+	 * and we allocated correct number of entries in sg_alloc_table()
+	 */
+	WARN_ON_ONCE(sgl);
+	return &dma->sgt;
+
+err_unmap_dma:
+	if (!i || !dma->state) {
+		; /* Do nothing */
+	} else if (dma_use_iova(dma->state)) {
+		dma_iova_destroy(attach->dev, dma->state, mapped_len, dir,
+				 DMA_ATTR_MMIO);
+	} else {
+		for_each_sgtable_dma_sg(&dma->sgt, sgl, i)
+			dma_unmap_phys(attach->dev, sg_dma_address(sgl),
+				       sg_dma_len(sgl), dir, DMA_ATTR_MMIO);
+	}
+	sg_free_table(&dma->sgt);
+err_free_state:
+	kfree(dma->state);
+err_free_dma:
+	kfree(dma);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_NS_GPL(dma_buf_phys_vec_to_sgt, "DMA_BUF");
+
+/**
+ * dma_buf_free_sgt- unmaps the buffer
+ * @attach:	[in]	attachment to unmap buffer from
+ * @sgt:	[in]	scatterlist info of the buffer to unmap
+ * @dir:	[in]	direction of DMA transfer
+ *
+ * This unmaps a DMA mapping for @attached obtained
+ * by dma_buf_phys_vec_to_sgt().
+ */
+void dma_buf_free_sgt(struct dma_buf_attachment *attach, struct sg_table *sgt,
+		      enum dma_data_direction dir)
+{
+	struct dma_buf_dma *dma = container_of(sgt, struct dma_buf_dma, sgt);
+	int i;
+
+	dma_resv_assert_held(attach->dmabuf->resv);
+
+	if (!dma->state) {
+		; /* Do nothing */
+	} else if (dma_use_iova(dma->state)) {
+		dma_iova_destroy(attach->dev, dma->state, dma->size, dir,
+				 DMA_ATTR_MMIO);
+	} else {
+		struct scatterlist *sgl;
+
+		for_each_sgtable_dma_sg(sgt, sgl, i)
+			dma_unmap_phys(attach->dev, sg_dma_address(sgl),
+				       sg_dma_len(sgl), dir, DMA_ATTR_MMIO);
+	}
+
+	sg_free_table(sgt);
+	kfree(dma->state);
+	kfree(dma);
+
+}
+EXPORT_SYMBOL_NS_GPL(dma_buf_free_sgt, "DMA_BUF");