drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

4 files changed, 518 insertions, 0 deletions

diff --git a/drivers/dio/Makefile b/drivers/dio/Makefile
new file mode 100644
index 000000000..11202f2bb
--- /dev/null
+++ b/drivers/dio/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the linux kernel.
+#
+
+obj-y := dio.o dio-driver.o dio-sysfs.o
diff --git a/drivers/dio/dio-driver.c b/drivers/dio/dio-driver.c
new file mode 100644
index 000000000..12fa2d209
--- /dev/null
+++ b/drivers/dio/dio-driver.c
@@ -0,0 +1,142 @@
+/*
+ *  DIO Driver Services
+ *
+ *  Copyright (C) 2004 Jochen Friedrich
+ *
+ *  Loosely based on drivers/pci/pci-driver.c and drivers/zorro/zorro-driver.c
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/dio.h>
+
+
+/**
+ *  dio_match_device - Tell if a DIO device structure has a matching DIO device id structure
+ *  @ids: array of DIO device id structures to search in
+ *  @d: the DIO device structure to match against
+ *
+ *  Used by a driver to check whether a DIO device present in the
+ *  system is in its list of supported devices. Returns the matching
+ *  dio_device_id structure or %NULL if there is no match.
+ */
+
+static const struct dio_device_id *
+dio_match_device(const struct dio_device_id *ids,
+		   const struct dio_dev *d)
+{
+	while (ids->id) {
+		if (ids->id == DIO_WILDCARD)
+			return ids;
+		if (DIO_NEEDSSECID(ids->id & 0xff)) {
+			if (ids->id == d->id)
+				return ids;
+		} else {
+			if ((ids->id & 0xff) == (d->id & 0xff))
+				return ids;
+		}
+		ids++;
+	}
+	return NULL;
+}
+
+static int dio_device_probe(struct device *dev)
+{
+	int error = 0;
+	struct dio_driver *drv = to_dio_driver(dev->driver);
+	struct dio_dev *d = to_dio_dev(dev);
+
+	if (!d->driver && drv->probe) {
+		const struct dio_device_id *id;
+
+		id = dio_match_device(drv->id_table, d);
+		if (id)
+			error = drv->probe(d, id);
+		if (error >= 0) {
+			d->driver = drv;
+			error = 0;
+		}
+	}
+	return error;
+}
+
+
+/**
+ *  dio_register_driver - register a new DIO driver
+ *  @drv: the driver structure to register
+ *
+ *  Adds the driver structure to the list of registered drivers
+ *  Returns zero or a negative error value.
+ */
+
+int dio_register_driver(struct dio_driver *drv)
+{
+	/* initialize common driver fields */
+	drv->driver.name = drv->name;
+	drv->driver.bus = &dio_bus_type;
+
+	/* register with core */
+	return driver_register(&drv->driver);
+}
+
+
+/**
+ *  dio_unregister_driver - unregister a DIO driver
+ *  @drv: the driver structure to unregister
+ *
+ *  Deletes the driver structure from the list of registered DIO drivers,
+ *  gives it a chance to clean up by calling its remove() function for
+ *  each device it was responsible for, and marks those devices as
+ *  driverless.
+ */
+
+void dio_unregister_driver(struct dio_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+
+
+/**
+ *  dio_bus_match - Tell if a DIO device structure has a matching DIO device id structure
+ *  @dev: the DIO device structure to match against
+ *  @drv: the &device_driver that points to the array of DIO device id structures to search
+ *
+ *  Used by the driver core to check whether a DIO device present in the
+ *  system is in a driver's list of supported devices. Returns 1 if supported,
+ *  and 0 if there is no match.
+ */
+
+static int dio_bus_match(struct device *dev, const struct device_driver *drv)
+{
+	struct dio_dev *d = to_dio_dev(dev);
+	const struct dio_driver *dio_drv = to_dio_driver(drv);
+	const struct dio_device_id *ids = dio_drv->id_table;
+
+	if (!ids)
+		return 0;
+
+	return dio_match_device(ids, d) ? 1 : 0;
+}
+
+
+const struct bus_type dio_bus_type = {
+	.name	= "dio",
+	.match	= dio_bus_match,
+	.probe	= dio_device_probe,
+};
+
+
+static int __init dio_driver_init(void)
+{
+	return bus_register(&dio_bus_type);
+}
+
+postcore_initcall(dio_driver_init);
+
+EXPORT_SYMBOL(dio_register_driver);
+EXPORT_SYMBOL(dio_unregister_driver);
+EXPORT_SYMBOL(dio_bus_type);
diff --git a/drivers/dio/dio-sysfs.c b/drivers/dio/dio-sysfs.c
new file mode 100644
index 000000000..ee1a3b59b
--- /dev/null
+++ b/drivers/dio/dio-sysfs.c
@@ -0,0 +1,82 @@
+/*
+ *  File Attributes for DIO Devices
+ *
+ *  Copyright (C) 2004 Jochen Friedrich
+ *
+ *  Loosely based on drivers/pci/pci-sysfs.c and drivers/zorro/zorro-sysfs.c
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/dio.h>
+#include <linux/stat.h>
+
+/* show configuration fields */
+
+static ssize_t dio_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dio_dev *d;
+
+	d = to_dio_dev(dev);
+	return sprintf(buf, "0x%02x\n", (d->id & 0xff));
+}
+static DEVICE_ATTR(id, S_IRUGO, dio_show_id, NULL);
+
+static ssize_t dio_show_ipl(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dio_dev *d;
+
+	d = to_dio_dev(dev);
+	return sprintf(buf, "0x%02x\n", d->ipl);
+}
+static DEVICE_ATTR(ipl, S_IRUGO, dio_show_ipl, NULL);
+
+static ssize_t dio_show_secid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dio_dev *d;
+
+	d = to_dio_dev(dev);
+	return sprintf(buf, "0x%02x\n", ((d->id >> 8)& 0xff));
+}
+static DEVICE_ATTR(secid, S_IRUGO, dio_show_secid, NULL);
+
+static ssize_t dio_show_name(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dio_dev *d;
+
+	d = to_dio_dev(dev);
+	return sprintf(buf, "%s\n", d->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, dio_show_name, NULL);
+
+static ssize_t dio_show_resource(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dio_dev *d = to_dio_dev(dev);
+
+	return sprintf(buf, "0x%08lx 0x%08lx 0x%08lx\n",
+		       (unsigned long)dio_resource_start(d),
+		       (unsigned long)dio_resource_end(d),
+		       dio_resource_flags(d));
+}
+static DEVICE_ATTR(resource, S_IRUGO, dio_show_resource, NULL);
+
+int dio_create_sysfs_dev_files(struct dio_dev *d)
+{
+	struct device *dev = &d->dev;
+	int error;
+
+	/* current configuration's attributes */
+	if ((error = device_create_file(dev, &dev_attr_id)) ||
+	    (error = device_create_file(dev, &dev_attr_ipl)) ||
+	    (error = device_create_file(dev, &dev_attr_secid)) ||
+	    (error = device_create_file(dev, &dev_attr_name)) ||
+	    (error = device_create_file(dev, &dev_attr_resource)))
+		return error;
+
+	return 0;
+}
+
diff --git a/drivers/dio/dio.c b/drivers/dio/dio.c
new file mode 100644
index 000000000..7722d9eae
--- /dev/null
+++ b/drivers/dio/dio.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Code to support devices on the DIO and DIO-II bus
+ * Copyright (C) 05/1998 Peter Maydell <pmaydell@chiark.greenend.org.uk>
+ * Copyright (C) 2004 Jochen Friedrich <jochen@scram.de>
+ *
+ * This code has basically these routines at the moment:
+ * int dio_find(u_int deviceid)
+ *    Search the list of DIO devices and return the select code
+ *    of the next unconfigured device found that matches the given device ID.
+ *    Note that the deviceid parameter should be the encoded ID.
+ *    This means that framebuffers should pass it as
+ *    DIO_ENCODE_ID(DIO_ID_FBUFFER,DIO_ID2_TOPCAT)
+ *    (or whatever); everybody else just uses DIO_ID_FOOBAR.
+ * unsigned long dio_scodetophysaddr(int scode)
+ *    Return the physical address corresponding to the given select code.
+ * int dio_scodetoipl(int scode)
+ *    Every DIO card has a fixed interrupt priority level. This function
+ *    returns it, whatever it is.
+ * const char *dio_scodetoname(int scode)
+ *    Return a character string describing this board [might be "" if
+ *    not CONFIG_DIO_CONSTANTS]
+ * void dio_config_board(int scode)     mark board as configured in the list
+ * void dio_unconfig_board(int scode)   mark board as no longer configured
+ *
+ * This file is based on the way the Amiga port handles Zorro II cards,
+ * although we aren't so complicated...
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dio.h>
+#include <linux/slab.h>                         /* kmalloc() */
+#include <linux/uaccess.h>
+#include <linux/io.h>                           /* readb() */
+
+struct dio_bus dio_bus = {
+	.resources = {
+		/* DIO range */
+		{ .name = "DIO mem", .start = 0x00600000, .end = 0x007fffff },
+		/* DIO-II range */
+		{ .name = "DIO-II mem", .start = 0x01000000, .end = 0x1fffffff }
+	},
+	.name = "DIO bus"
+};
+
+/* not a real config option yet! */
+#define CONFIG_DIO_CONSTANTS
+
+#ifdef CONFIG_DIO_CONSTANTS
+/* We associate each numeric ID with an appropriate descriptive string
+ * using a constant array of these structs.
+ * FIXME: we should be able to arrange to throw away most of the strings
+ * using the initdata stuff. Then we wouldn't need to worry about
+ * carrying them around...
+ * I think we do this by copying them into newly kmalloc()ed memory and
+ * marking the names[] array as .initdata ?
+ */
+struct dioname {
+	int id;
+	const char *name;
+};
+
+/* useful macro */
+#define DIONAME(x) { DIO_ID_##x, DIO_DESC_##x }
+#define DIOFBNAME(x) { DIO_ENCODE_ID(DIO_ID_FBUFFER, DIO_ID2_##x), DIO_DESC2_##x }
+
+static struct dioname names[] = {
+	DIONAME(DCA0), DIONAME(DCA0REM), DIONAME(DCA1), DIONAME(DCA1REM),
+	DIONAME(DCM), DIONAME(DCMREM),
+	DIONAME(LAN),
+	DIONAME(FHPIB), DIONAME(NHPIB),
+	DIONAME(SCSI0), DIONAME(SCSI1), DIONAME(SCSI2), DIONAME(SCSI3),
+	DIONAME(FBUFFER),
+	DIONAME(PARALLEL), DIONAME(VME), DIONAME(DCL), DIONAME(DCLREM),
+	DIONAME(MISC0), DIONAME(MISC1), DIONAME(MISC2), DIONAME(MISC3),
+	DIONAME(MISC4), DIONAME(MISC5), DIONAME(MISC6), DIONAME(MISC7),
+	DIONAME(MISC8), DIONAME(MISC9), DIONAME(MISC10), DIONAME(MISC11),
+	DIONAME(MISC12), DIONAME(MISC13),
+	DIOFBNAME(GATORBOX), DIOFBNAME(TOPCAT), DIOFBNAME(RENAISSANCE),
+	DIOFBNAME(LRCATSEYE), DIOFBNAME(HRCCATSEYE), DIOFBNAME(HRMCATSEYE),
+	DIOFBNAME(DAVINCI), DIOFBNAME(XXXCATSEYE), DIOFBNAME(HYPERION),
+	DIOFBNAME(XGENESIS), DIOFBNAME(TIGER), DIOFBNAME(YGENESIS)
+};
+
+#undef DIONAME
+#undef DIOFBNAME
+
+static const char unknowndioname[]
+	= "unknown DIO board, please email linux-m68k@lists.linux-m68k.org";
+
+static const char *dio_getname(int id)
+{
+	/* return pointer to a constant string describing the board with given ID */
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(names); i++)
+		if (names[i].id == id)
+			return names[i].name;
+
+	return unknowndioname;
+}
+
+#else
+
+static char dio_no_name[] = { 0 };
+#define dio_getname(_id)	(dio_no_name)
+
+#endif /* CONFIG_DIO_CONSTANTS */
+
+static void dio_dev_release(struct device *dev)
+{
+	struct dio_dev *ddev = container_of(dev, typeof(struct dio_dev), dev);
+	kfree(ddev);
+}
+
+int __init dio_find(int deviceid)
+{
+	/* Called to find a DIO device before the full bus scan has run.
+	 * Only used by the console driver.
+	 */
+	int scode, id;
+	u_char prid, secid, i;
+
+	for (scode = 0; scode < DIO_SCMAX; scode++) {
+		void *va;
+		unsigned long pa;
+
+		if (DIO_SCINHOLE(scode))
+			continue;
+
+		pa = dio_scodetophysaddr(scode);
+
+		if (!pa)
+			continue;
+
+		if (scode < DIOII_SCBASE)
+			va = (void *)(pa + DIO_VIRADDRBASE);
+		else
+			va = ioremap(pa, PAGE_SIZE);
+
+		if (copy_from_kernel_nofault(&i,
+				(unsigned char *)va + DIO_IDOFF, 1)) {
+			if (scode >= DIOII_SCBASE)
+				iounmap(va);
+			continue;	     /* no board present at that select code */
+		}
+
+		prid = DIO_ID(va);
+
+		if (DIO_NEEDSSECID(prid)) {
+			secid = DIO_SECID(va);
+			id = DIO_ENCODE_ID(prid, secid);
+		} else
+			id = prid;
+
+		if (id == deviceid) {
+			if (scode >= DIOII_SCBASE)
+				iounmap(va);
+			return scode;
+		}
+	}
+
+	return -1;
+}
+
+/* This is the function that scans the DIO space and works out what
+ * hardware is actually present.
+ */
+static int __init dio_init(void)
+{
+	int scode;
+	int i;
+	struct dio_dev *dev;
+	int error;
+
+	if (!MACH_IS_HP300)
+		return 0;
+
+	pr_info("Scanning for DIO devices...\n");
+
+	/* Initialize the DIO bus */
+	INIT_LIST_HEAD(&dio_bus.devices);
+	dev_set_name(&dio_bus.dev, "dio");
+	error = device_register(&dio_bus.dev);
+	if (error) {
+		pr_err("DIO: Error registering dio_bus\n");
+		return error;
+	}
+
+	/* Request all resources */
+	dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
+	for (i = 0; i < dio_bus.num_resources; i++)
+		request_resource(&iomem_resource, &dio_bus.resources[i]);
+
+	/* Register all devices */
+	for (scode = 0; scode < DIO_SCMAX; ++scode) {
+		u_char prid, secid = 0;	/* primary, secondary ID bytes */
+		u_char *va;
+		unsigned long pa;
+
+		if (DIO_SCINHOLE(scode))
+			continue;
+
+		pa = dio_scodetophysaddr(scode);
+
+		if (!pa)
+			continue;
+
+		if (scode < DIOII_SCBASE)
+			va = (void *)(pa + DIO_VIRADDRBASE);
+		else
+			va = ioremap(pa, PAGE_SIZE);
+
+		if (copy_from_kernel_nofault(&i,
+				(unsigned char *)va + DIO_IDOFF, 1)) {
+			if (scode >= DIOII_SCBASE)
+				iounmap(va);
+			continue;	      /* no board present at that select code */
+		}
+
+		/* Found a board, allocate it an entry in the list */
+		dev = kzalloc_obj(struct dio_dev);
+		if (!dev) {
+			if (scode >= DIOII_SCBASE)
+				iounmap(va);
+			return -ENOMEM;
+		}
+
+		dev->bus = &dio_bus;
+		dev->dev.parent = &dio_bus.dev;
+		dev->dev.bus = &dio_bus_type;
+		dev->dev.release = dio_dev_release;
+		dev->scode = scode;
+		dev->resource.start = pa;
+		dev->resource.end = pa + DIO_SIZE(scode, va);
+		dev_set_name(&dev->dev, "%02x", scode);
+
+		/* read the ID byte(s) and encode if necessary. */
+		prid = DIO_ID(va);
+
+		if (DIO_NEEDSSECID(prid)) {
+			secid = DIO_SECID(va);
+			dev->id = DIO_ENCODE_ID(prid, secid);
+		} else
+			dev->id = prid;
+
+		dev->ipl = DIO_IPL(va);
+		strscpy(dev->name, dio_getname(dev->id));
+		if (DIO_NEEDSSECID(prid))
+			pr_info("select code %3d: ipl %u: ID %02X:%02X: %s\n",
+				dev->scode, dev->ipl, prid, secid, dev->name);
+		else
+			pr_info("select code %3d: ipl %u: ID %02X: %s\n",
+				dev->scode, dev->ipl, prid, dev->name);
+
+		if (scode >= DIOII_SCBASE)
+			iounmap(va);
+		error = device_register(&dev->dev);
+		if (error) {
+			pr_err("DIO: Error registering device %s\n", dev->name);
+			put_device(&dev->dev);
+			continue;
+		}
+		error = dio_create_sysfs_dev_files(dev);
+		if (error)
+			dev_err(&dev->dev, "Error creating sysfs files\n");
+	}
+	return 0;
+}
+
+subsys_initcall(dio_init);
+
+/* Bear in mind that this is called in the very early stages of initialisation
+ * in order to get the address of the serial port for the console...
+ */
+unsigned long dio_scodetophysaddr(int scode)
+{
+	if (scode >= DIOII_SCBASE)
+		return (DIOII_BASE + (scode - 132) * DIOII_DEVSIZE);
+	else if (scode > DIO_SCMAX || scode < 0)
+		return 0;
+	else if (DIO_SCINHOLE(scode))
+		return 0;
+
+	return (DIO_BASE + scode * DIO_DEVSIZE);
+}