iio: proximity: isl29501: Fix return type of isl29501_register_writegrafted

isl29501_register_write() was returning a u32 instead of an int.
Since the function returns negative error codes (such as -ERANGE or
return values from i2c_smbus_write_byte_data()), returning an unsigned
integer type prevents callers from correctly checking for negative error
conditions.

Fix this by changing the function return type from u32 to int.

This was found through manual code review.

Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 166 insertions, 0 deletions

diff --git a/drivers/devfreq/imx-bus.c b/drivers/devfreq/imx-bus.c
new file mode 100644
index 000000000..49798f542
--- /dev/null
+++ b/drivers/devfreq/imx-bus.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_bus {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	struct platform_device *icc_pdev;
+};
+
+static int imx_bus_target(struct device *dev,
+		unsigned long *freq, u32 flags)
+{
+	struct dev_pm_opp *new_opp;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	dev_pm_opp_put(new_opp);
+
+	return dev_pm_opp_set_rate(dev, *freq);
+}
+
+static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_bus_exit(struct device *dev)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	dev_pm_opp_of_remove_table(dev);
+	platform_device_unregister(priv->icc_pdev);
+}
+
+/* imx_bus_init_icc() - register matching icc provider if required */
+static int imx_bus_init_icc(struct device *dev)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+	const char *icc_driver_name;
+
+	if (!of_property_present(dev->of_node, "#interconnect-cells"))
+		return 0;
+	if (!IS_ENABLED(CONFIG_INTERCONNECT_IMX)) {
+		dev_warn(dev, "imx interconnect drivers disabled\n");
+		return 0;
+	}
+
+	icc_driver_name = of_device_get_match_data(dev);
+	if (!icc_driver_name) {
+		dev_err(dev, "unknown interconnect driver\n");
+		return 0;
+	}
+
+	priv->icc_pdev = platform_device_register_data(
+			dev, icc_driver_name, -1, NULL, 0);
+	if (IS_ERR(priv->icc_pdev)) {
+		dev_err(dev, "failed to register icc provider %s: %ld\n",
+				icc_driver_name, PTR_ERR(priv->icc_pdev));
+		return PTR_ERR(priv->icc_pdev);
+	}
+
+	return 0;
+}
+
+static int imx_bus_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_bus *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/*
+	 * Fetch the clock to adjust but don't explicitly enable.
+	 *
+	 * For imx bus clock clk_set_rate is safe no matter if the clock is on
+	 * or off and some peripheral side-buses might be off unless enabled by
+	 * drivers for devices on those specific buses.
+	 *
+	 * Rate adjustment on a disabled bus clock just takes effect later.
+	 */
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.target = imx_bus_target;
+	priv->profile.exit = imx_bus_exit;
+	priv->profile.get_cur_freq = imx_bus_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	ret = imx_bus_init_icc(dev);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_bus_of_match[] = {
+	{ .compatible = "fsl,imx8mq-noc", .data = "imx8mq-interconnect", },
+	{ .compatible = "fsl,imx8mm-noc", .data = "imx8mm-interconnect", },
+	{ .compatible = "fsl,imx8mn-noc", .data = "imx8mn-interconnect", },
+	{ .compatible = "fsl,imx8mp-noc", .data = "imx8mp-interconnect", },
+	{ .compatible = "fsl,imx8m-noc", },
+	{ .compatible = "fsl,imx8m-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_bus_of_match);
+
+static struct platform_driver imx_bus_platdrv = {
+	.probe		= imx_bus_probe,
+	.driver = {
+		.name	= "imx-bus-devfreq",
+		.of_match_table = imx_bus_of_match,
+	},
+};
+module_platform_driver(imx_bus_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency scaling driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");