diff options
| author | Fuad Tabba <fuad.tabba@linux.dev> | 2026-09-22 19:14:30 +0100 |
|---|---|---|
| committer | Will Deacon <will@kernel.org> | 2026-09-23 12:34:30 +0000 |
| commit | 2bc6b218717b9d08f466f88209251d54bc09b207 (patch) | |
| tree | cb91c941eccb15f94cbec4e96aa3a9c8736b5d66 /drivers/devfreq/event/Kconfig | |
| download | linux-stable-2bc6b218717b9d08f466f88209251d54bc09b207.tar.gz linux-stable-2bc6b218717b9d08f466f88209251d54bc09b207.zip | |
arm64/boot: Disable trapping of PMZR_EL0 writes to EL2grafted
__init_el2_fgt2() writes one mask to both HDFGRTR2_EL2 and HDFGWTR2_EL2.
PMZR_EL0 is write-only, so its trap bit, nPMZR_EL0, exists only in
HDFGWTR2_EL2 and is therefore never set: a PMZR_EL0 write from the host
traps to EL2, where the nVHE hypervisor has no handler and BUG()s. The
kernel never writes PMZR_EL0, but kernel.perf_user_access=1 has the PMU
driver set PMUSERENR_EL0.UEN for a task with a user-read event, so a
write from EL0 reaches the trap and takes the host down without a panic
message.
Accumulate the HDFGWTR2_EL2 bits separately, as __init_el2_fgt() already
does for HDFGWTR_EL2, and set nPMZR_EL0 with the other FEAT_PMUv3p9
bits.
Fixes: 858c7bfcb35e1 ("arm64/boot: Enable EL2 requirements for FEAT_PMUv3p9")
Cc: stable@vger.kernel.org
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Diffstat (limited to 'drivers/devfreq/event/Kconfig')
| -rw-r--r-- | drivers/devfreq/event/Kconfig | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/drivers/devfreq/event/Kconfig b/drivers/devfreq/event/Kconfig new file mode 100644 index 000000000..878825372 --- /dev/null +++ b/drivers/devfreq/event/Kconfig @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig PM_DEVFREQ_EVENT + bool "DEVFREQ-Event device Support" + help + The devfreq-event device provide the raw data and events which + indicate the current state of devfreq-event device. The provided + data from devfreq-event device is used to monitor the state of + device and determine the suitable size of resource to reduce the + wasted resource. + + The devfreq-event device can support the various type of events + (e.g., raw data, utilization, latency, bandwidth). The events + may be used by devfreq governor and other subsystem. + +if PM_DEVFREQ_EVENT + +config DEVFREQ_EVENT_EXYNOS_NOCP + tristate "Exynos NoC (Network On Chip) Probe DEVFREQ event Driver" + depends on ARCH_EXYNOS || COMPILE_TEST + select PM_OPP + select REGMAP_MMIO + help + This add the devfreq-event driver for Exynos SoC. It provides NoC + (Network on Chip) Probe counters to measure the bandwidth of AXI bus. + +config DEVFREQ_EVENT_EXYNOS_PPMU + tristate "Exynos PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver" + depends on ARCH_EXYNOS || COMPILE_TEST + select PM_OPP + help + This add the devfreq-event driver for Exynos SoC. It provides PPMU + (Platform Performance Monitoring Unit) counters to estimate the + utilization of each module. + +config DEVFREQ_EVENT_ROCKCHIP_DFI + tristate "ROCKCHIP DFI DEVFREQ event Driver" + depends on ARCH_ROCKCHIP || COMPILE_TEST + help + This add the devfreq-event driver for Rockchip SoC. It provides DFI + (DDR Monitor Module) driver to count ddr load. + +endif # PM_DEVFREQ_EVENT |
