Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 197 insertions, 0 deletions

diff --git a/drivers/crypto/caam/Kconfig b/drivers/crypto/caam/Kconfig
new file mode 100644
index 000000000..05210a0ed
--- /dev/null
+++ b/drivers/crypto/caam/Kconfig
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0
+config CRYPTO_DEV_FSL_CAAM_COMMON
+	tristate
+
+config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+	tristate
+
+config CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
+	tristate
+
+config CRYPTO_DEV_FSL_CAAM
+	tristate "Freescale CAAM-Multicore platform driver backend"
+	depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
+	select SOC_BUS
+	select CRYPTO_DEV_FSL_CAAM_COMMON
+	imply FSL_MC_BUS
+	help
+	  Enables the driver module for Freescale's Cryptographic Accelerator
+	  and Assurance Module (CAAM), also known as the SEC version 4 (SEC4).
+	  This module creates job ring devices, and configures h/w
+	  to operate as a DPAA component automatically, depending
+	  on h/w feature availability.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called caam.
+
+if CRYPTO_DEV_FSL_CAAM
+
+config CRYPTO_DEV_FSL_CAAM_DEBUG
+	bool "Enable debug output in CAAM driver"
+	help
+	  Selecting this will enable printing of various debug
+	  information in the CAAM driver.
+
+menuconfig CRYPTO_DEV_FSL_CAAM_JR
+	tristate "Freescale CAAM Job Ring driver backend"
+	select CRYPTO_ENGINE
+	default y
+	help
+	  Enables the driver module for Job Rings which are part of
+	  Freescale's Cryptographic Accelerator
+	  and Assurance Module (CAAM). This module adds a job ring operation
+	  interface.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called caam_jr.
+
+if CRYPTO_DEV_FSL_CAAM_JR
+
+config CRYPTO_DEV_FSL_CAAM_RINGSIZE
+	int "Job Ring size"
+	range 2 9
+	default "9"
+	help
+	  Select size of Job Rings as a power of 2, within the
+	  range 2-9 (ring size 4-512).
+	  Examples:
+		2 => 4
+		3 => 8
+		4 => 16
+		5 => 32
+		6 => 64
+		7 => 128
+		8 => 256
+		9 => 512
+
+config CRYPTO_DEV_FSL_CAAM_INTC
+	bool "Job Ring interrupt coalescing"
+	help
+	  Enable the Job Ring's interrupt coalescing feature.
+
+	  Note: the driver already provides adequate
+	  interrupt coalescing in software.
+
+config CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD
+	int "Job Ring interrupt coalescing count threshold"
+	depends on CRYPTO_DEV_FSL_CAAM_INTC
+	range 1 255
+	default 255
+	help
+	  Select number of descriptor completions to queue before
+	  raising an interrupt, in the range 1-255. Note that a selection
+	  of 1 functionally defeats the coalescing feature, and a selection
+	  equal or greater than the job ring size will force timeouts.
+
+config CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD
+	int "Job Ring interrupt coalescing timer threshold"
+	depends on CRYPTO_DEV_FSL_CAAM_INTC
+	range 1 65535
+	default 2048
+	help
+	  Select number of bus clocks/64 to timeout in the case that one or
+	  more descriptor completions are queued without reaching the count
+	  threshold. Range is 1-65535.
+
+config CRYPTO_DEV_FSL_CAAM_CRYPTO_API
+	bool "Register algorithm implementations with the Crypto API"
+	default y
+	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+	select CRYPTO_AEAD
+	select CRYPTO_AUTHENC
+	select CRYPTO_SKCIPHER
+	select CRYPTO_LIB_DES
+	select CRYPTO_XTS
+	help
+	  Selecting this will offload crypto for users of the
+	  scatterlist crypto API (such as the linux native IPSec
+	  stack) to the SEC4 via job ring.
+
+config CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI
+	bool "Queue Interface as Crypto API backend"
+	depends on FSL_DPAA && NET
+	default y
+	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+	select CRYPTO_AUTHENC
+	select CRYPTO_SKCIPHER
+	select CRYPTO_DES
+	select CRYPTO_XTS
+	help
+	  Selecting this will use CAAM Queue Interface (QI) for sending
+	  & receiving crypto jobs to/from CAAM. This gives better performance
+	  than job ring interface when the number of cores are more than the
+	  number of job rings assigned to the kernel. The number of portals
+	  assigned to the kernel should also be more than the number of
+	  job rings.
+
+config CRYPTO_DEV_FSL_CAAM_AHASH_API
+	bool "Register hash algorithm implementations with Crypto API"
+	default y
+	select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
+	select CRYPTO_HASH
+	help
+	  Selecting this will offload ahash for users of the
+	  scatterlist crypto API to the SEC4 via job ring.
+
+config CRYPTO_DEV_FSL_CAAM_PKC_API
+	bool "Register public key cryptography implementations with Crypto API"
+	default y
+	select CRYPTO_RSA
+	help
+	  Selecting this will allow SEC Public key support for RSA.
+	  Supported cryptographic primitives: encryption, decryption,
+	  signature and verification.
+
+config CRYPTO_DEV_FSL_CAAM_RNG_API
+	bool "Register caam device for hwrng API"
+	default y
+	select CRYPTO_RNG
+	select HW_RANDOM
+	help
+	  Selecting this will register the SEC4 hardware rng to
+	  the hw_random API for supplying the kernel entropy pool.
+
+config CRYPTO_DEV_FSL_CAAM_PRNG_API
+	bool "Register Pseudo random number generation implementation with Crypto API"
+	default y
+	select CRYPTO_RNG
+	help
+	  Selecting this will register the SEC hardware prng to
+	  the Crypto API.
+
+config CRYPTO_DEV_FSL_CAAM_BLOB_GEN
+	bool
+
+config CRYPTO_DEV_FSL_CAAM_RNG_TEST
+	bool "Test caam rng"
+	select CRYPTO_DEV_FSL_CAAM_RNG_API
+	help
+	  Selecting this will enable a self-test to run for the
+	  caam RNG.
+	  This test is several minutes long and executes
+	  just before the RNG is registered with the hw_random API.
+
+endif # CRYPTO_DEV_FSL_CAAM_JR
+
+endif # CRYPTO_DEV_FSL_CAAM
+
+config CRYPTO_DEV_FSL_DPAA2_CAAM
+	tristate "QorIQ DPAA2 CAAM (DPSECI) driver"
+	depends on FSL_MC_DPIO
+	depends on NETDEVICES
+	select CRYPTO_DEV_FSL_CAAM_COMMON
+	select CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC
+	select CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC
+	select CRYPTO_SKCIPHER
+	select CRYPTO_AUTHENC
+	select CRYPTO_AEAD
+	select CRYPTO_HASH
+	select CRYPTO_DES
+	select CRYPTO_XTS
+	help
+	  CAAM driver for QorIQ Data Path Acceleration Architecture 2.
+	  It handles DPSECI DPAA2 objects that sit on the Management Complex
+	  (MC) fsl-mc bus.
+
+	  To compile this as a module, choose M here: the module
+	  will be called dpaa2_caam.