ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 150 insertions, 0 deletions

diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
new file mode 100644
index 000000000..d30d22dfe
--- /dev/null
+++ b/drivers/counter/Kconfig
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Counter devices
+#
+
+config I8254
+	tristate
+	select COUNTER
+	select REGMAP
+	help
+	  Enables support for the i8254 interface library functions. The i8254
+	  interface library provides functions to facilitate communication with
+	  interfaces compatible with the venerable Intel 8254 Programmable
+	  Interval Timer (PIT). The Intel 825x family of chips was first
+	  released in the early 1980s but compatible interfaces are nowadays
+	  typically found embedded in larger VLSI processing chips and FPGA
+	  components.
+
+	  If built as a module its name will be i8254.
+
+menuconfig COUNTER
+	tristate "Counter support"
+	help
+	  This enables counter device support through the Generic Counter
+	  interface. You only need to enable this, if you also want to enable
+	  one or more of the counter device drivers below.
+
+if COUNTER
+
+config 104_QUAD_8
+	tristate "ACCES 104-QUAD-8 driver"
+	depends on (PC104 && X86) || COMPILE_TEST
+	depends on HAS_IOPORT_MAP
+	select ISA_BUS_API
+	select REGMAP_MMIO
+	help
+	  Say yes here to build support for the ACCES 104-QUAD-8 quadrature
+	  encoder counter/interface device family (104-QUAD-8, 104-QUAD-4).
+
+	  A counter's respective error flag may be cleared by performing a write
+	  operation on the respective count value attribute. The 104-QUAD-8
+	  counters may be set either directly or via the counter's preset
+	  attribute.
+
+	  The base port addresses for the devices may be configured via the base
+	  array module parameter. The interrupt line numbers for the devices may
+	  be configured via the irq array module parameter.
+
+config FTM_QUADDEC
+	tristate "Flex Timer Module Quadrature decoder driver"
+	depends on SOC_LS1021A || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  Select this option to enable the Flex Timer Quadrature decoder
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ftm-quaddec.
+
+config INTEL_QEP
+	tristate "Intel Quadrature Encoder Peripheral driver"
+	depends on X86
+	depends on PCI
+	help
+	  Select this option to enable the Intel Quadrature Encoder Peripheral
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-qep.
+
+config INTERRUPT_CNT
+	tristate "Interrupt counter driver"
+	depends on GPIOLIB
+	help
+	  Select this option to enable interrupt counter driver. Any interrupt
+	  source can be used by this driver as the event source.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called interrupt-cnt.
+
+config MICROCHIP_TCB_CAPTURE
+	tristate "Microchip Timer Counter Capture driver"
+	depends on SOC_AT91SAM9 || SOC_SAM_V7 || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Microchip Timer Counter Block
+	  capture driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called microchip-tcb-capture.
+
+config RZ_MTU3_CNT
+	tristate "Renesas RZ/G2L MTU3a counter driver"
+	depends on RZ_MTU3
+	help
+	  Enable support for MTU3a counter driver found on Renesas RZ/G2L alike
+	  SoCs. This IP supports both 16-bit and 32-bit phase counting mode
+	  support.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rz-mtu3-cnt.
+
+config STM32_LPTIMER_CNT
+	tristate "STM32 LP Timer encoder counter driver"
+	depends on MFD_STM32_LPTIMER || COMPILE_TEST
+	help
+	  Select this option to enable STM32 Low-Power Timer quadrature encoder
+	  and counter driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stm32-lptimer-cnt.
+
+config STM32_TIMER_CNT
+	tristate "STM32 Timer encoder counter driver"
+	depends on MFD_STM32_TIMERS || COMPILE_TEST
+	help
+	  Select this option to enable STM32 Timer quadrature encoder
+	  and counter driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stm32-timer-cnt.
+
+config TI_ECAP_CAPTURE
+	tristate "TI eCAP capture driver"
+	depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+	depends on HAS_IOMEM
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Texas Instruments Enhanced Capture
+	  (eCAP) driver in input mode.
+
+	  It can be used to timestamp events (falling/rising edges) detected
+	  on ECAP input signal.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ti-ecap-capture.
+
+config TI_EQEP
+	tristate "TI eQEP counter driver"
+	depends on SOC_AM33XX || ARCH_K3 || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Texas Instruments Enhanced Quadrature
+	  Encoder Pulse (eQEP) counter driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ti-eqep.
+
+endif # COUNTER