drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 213 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-zevio.c b/drivers/clocksource/timer-zevio.c
new file mode 100644
index 000000000..9a67b84b3
--- /dev/null
+++ b/drivers/clocksource/timer-zevio.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/drivers/clocksource/zevio-timer.c
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#define IO_CURRENT_VAL	0x00
+#define IO_DIVIDER	0x04
+#define IO_CONTROL	0x08
+
+#define IO_TIMER1	0x00
+#define IO_TIMER2	0x0C
+
+#define IO_MATCH_BEGIN	0x18
+#define IO_MATCH(x)	(IO_MATCH_BEGIN + ((x) << 2))
+
+#define IO_INTR_STS	0x00
+#define IO_INTR_ACK	0x00
+#define IO_INTR_MSK	0x04
+
+#define CNTL_STOP_TIMER	(1 << 4)
+#define CNTL_RUN_TIMER	(0 << 4)
+
+#define CNTL_INC	(1 << 3)
+#define CNTL_DEC	(0 << 3)
+
+#define CNTL_TOZERO	0
+#define CNTL_MATCH(x)	((x) + 1)
+#define CNTL_FOREVER	7
+
+/* There are 6 match registers but we only use one. */
+#define TIMER_MATCH	0
+
+#define TIMER_INTR_MSK	(1 << (TIMER_MATCH))
+#define TIMER_INTR_ALL	0x3F
+
+struct zevio_timer {
+	void __iomem *base;
+	void __iomem *timer1, *timer2;
+	void __iomem *interrupt_regs;
+
+	struct clk *clk;
+	struct clock_event_device clkevt;
+
+	char clocksource_name[64];
+	char clockevent_name[64];
+};
+
+static int zevio_timer_set_event(unsigned long delta,
+				 struct clock_event_device *dev)
+{
+	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+						 clkevt);
+
+	writel(delta, timer->timer1 + IO_CURRENT_VAL);
+	writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH),
+			timer->timer1 + IO_CONTROL);
+
+	return 0;
+}
+
+static int zevio_timer_shutdown(struct clock_event_device *dev)
+{
+	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+						 clkevt);
+
+	/* Disable timer interrupts */
+	writel(0, timer->interrupt_regs + IO_INTR_MSK);
+	writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+	/* Stop timer */
+	writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+	return 0;
+}
+
+static int zevio_timer_set_oneshot(struct clock_event_device *dev)
+{
+	struct zevio_timer *timer = container_of(dev, struct zevio_timer,
+						 clkevt);
+
+	/* Enable timer interrupts */
+	writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
+	writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+	return 0;
+}
+
+static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
+{
+	struct zevio_timer *timer = dev_id;
+	u32 intr;
+
+	intr = readl(timer->interrupt_regs + IO_INTR_ACK);
+	if (!(intr & TIMER_INTR_MSK))
+		return IRQ_NONE;
+
+	writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK);
+	writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+
+	if (timer->clkevt.event_handler)
+		timer->clkevt.event_handler(&timer->clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init zevio_timer_add(struct device_node *node)
+{
+	struct zevio_timer *timer;
+	struct resource res;
+	int irqnr, ret;
+
+	timer = kzalloc_obj(*timer);
+	if (!timer)
+		return -ENOMEM;
+
+	timer->base = of_iomap(node, 0);
+	if (!timer->base) {
+		ret = -EINVAL;
+		goto error_free;
+	}
+	timer->timer1 = timer->base + IO_TIMER1;
+	timer->timer2 = timer->base + IO_TIMER2;
+
+	timer->clk = of_clk_get(node, 0);
+	if (IS_ERR(timer->clk)) {
+		ret = PTR_ERR(timer->clk);
+		pr_err("Timer clock not found! (error %d)\n", ret);
+		goto error_unmap;
+	}
+
+	timer->interrupt_regs = of_iomap(node, 1);
+	irqnr = irq_of_parse_and_map(node, 0);
+
+	of_address_to_resource(node, 0, &res);
+	scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
+			"%llx.%pOFn_clocksource",
+			(unsigned long long)res.start, node);
+
+	scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
+			"%llx.%pOFn_clockevent",
+			(unsigned long long)res.start, node);
+
+	if (timer->interrupt_regs && irqnr) {
+		timer->clkevt.name		= timer->clockevent_name;
+		timer->clkevt.set_next_event	= zevio_timer_set_event;
+		timer->clkevt.set_state_shutdown = zevio_timer_shutdown;
+		timer->clkevt.set_state_oneshot = zevio_timer_set_oneshot;
+		timer->clkevt.tick_resume	= zevio_timer_set_oneshot;
+		timer->clkevt.rating		= 200;
+		timer->clkevt.cpumask		= cpu_possible_mask;
+		timer->clkevt.features		= CLOCK_EVT_FEAT_ONESHOT;
+		timer->clkevt.irq		= irqnr;
+
+		writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
+		writel(0, timer->timer1 + IO_DIVIDER);
+
+		/* Start with timer interrupts disabled */
+		writel(0, timer->interrupt_regs + IO_INTR_MSK);
+		writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
+
+		/* Interrupt to occur when timer value matches 0 */
+		writel(0, timer->base + IO_MATCH(TIMER_MATCH));
+
+		if (request_irq(irqnr, zevio_timer_interrupt,
+				IRQF_TIMER | IRQF_IRQPOLL,
+				timer->clockevent_name, timer)) {
+			pr_err("%s: request_irq() failed\n",
+			       timer->clockevent_name);
+		}
+
+		clockevents_config_and_register(&timer->clkevt,
+				clk_get_rate(timer->clk), 0x0001, 0xffff);
+		pr_info("Added %s as clockevent\n", timer->clockevent_name);
+	}
+
+	writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL);
+	writel(0, timer->timer2 + IO_CURRENT_VAL);
+	writel(0, timer->timer2 + IO_DIVIDER);
+	writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
+			timer->timer2 + IO_CONTROL);
+
+	clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
+			timer->clocksource_name,
+			clk_get_rate(timer->clk),
+			200, 16,
+			clocksource_mmio_readw_up);
+
+	pr_info("Added %s as clocksource\n", timer->clocksource_name);
+
+	return 0;
+error_unmap:
+	iounmap(timer->base);
+error_free:
+	kfree(timer);
+	return ret;
+}
+
+static int __init zevio_timer_init(struct device_node *node)
+{
+	return zevio_timer_add(node);
+}
+
+TIMER_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_init);