Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 165 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c
new file mode 100644
index 000000000..a86529a70
--- /dev/null
+++ b/drivers/clocksource/timer-ti-32k.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * timer-ti-32k.c - OMAP2 32k Timer Support
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Paul Mundt <paul.mundt@nokia.com>
+ *         Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * Some parts based off of TI's 24xx code:
+ *
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
+ *
+ * Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched_clock.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
+
+struct ti_32k {
+	void __iomem		*base;
+	void __iomem		*counter;
+	struct clocksource	cs;
+};
+
+static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
+{
+	return container_of(cs, struct ti_32k, cs);
+}
+
+static u64 notrace ti_32k_read_cycles(struct clocksource *cs)
+{
+	struct ti_32k *ti = to_ti_32k(cs);
+
+	return (u64)readl_relaxed(ti->counter);
+}
+
+static struct ti_32k ti_32k_timer = {
+	.cs = {
+		.name		= "32k_counter",
+		.rating		= 250,
+		.read		= ti_32k_read_cycles,
+		.mask		= CLOCKSOURCE_MASK(32),
+		.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	},
+};
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+	return ti_32k_read_cycles(&ti_32k_timer.cs);
+}
+
+static void __init ti_32k_timer_enable_clock(struct device_node *np,
+					     const char *name)
+{
+	struct clk *clock;
+	int error;
+
+	clock = of_clk_get_by_name(np->parent, name);
+	if (IS_ERR(clock)) {
+		/* Only some SoCs have a separate interface clock */
+		if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
+			return;
+
+		pr_warn("%s: could not get clock %s %li\n",
+			__func__, name, PTR_ERR(clock));
+		return;
+	}
+
+	error = clk_prepare_enable(clock);
+	if (error) {
+		pr_warn("%s: could not enable %s: %i\n",
+			__func__, name, error);
+		return;
+	}
+}
+
+static void __init ti_32k_timer_module_init(struct device_node *np,
+					    void __iomem *base)
+{
+	void __iomem *sysc = base + 4;
+
+	if (!of_device_is_compatible(np->parent, "ti,sysc"))
+		return;
+
+	ti_32k_timer_enable_clock(np, "fck");
+	ti_32k_timer_enable_clock(np, "ick");
+
+	/*
+	 * Force idle module as wkup domain is active with MPU.
+	 * No need to tag the module disabled for ti-sysc probe.
+	 */
+	writel_relaxed(0, sysc);
+}
+
+static int __init ti_32k_timer_init(struct device_node *np)
+{
+	int ret;
+
+	ti_32k_timer.base = of_iomap(np, 0);
+	if (!ti_32k_timer.base) {
+		pr_err("Can't ioremap 32k timer base\n");
+		return -ENXIO;
+	}
+
+	if (!of_machine_is_compatible("ti,am43"))
+		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
+	ti_32k_timer.counter = ti_32k_timer.base;
+	ti_32k_timer_module_init(np, ti_32k_timer.base);
+
+	/*
+	 * 32k sync Counter IP register offsets vary between the highlander
+	 * version and the legacy ones.
+	 *
+	 * The 'SCHEME' bits(30-31) of the revision register is used to identify
+	 * the version.
+	 */
+	if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
+			OMAP2_32KSYNCNT_REV_SCHEME)
+		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
+	if (ret) {
+		pr_err("32k_counter: can't register clocksource\n");
+		return ret;
+	}
+
+	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+
+	return 0;
+}
+TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
+		ti_32k_timer_init);