Merge tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Don't destroy user event fields when removal fails

   User event fields are destroyed before the event is removed from
   visibility. But that can fail leaving the still visible event with no
   fields. Move the destroying of the fields to after the event is
   successfully removed from visibility.

 - Initialize function graph state is fork before calling
   copy_exec_state()

   For non-CLONE_VM forks, copy_exec_state() allocates a new
   task_exec_state. If that allocation fails, ftrace_graph_exit_task()
   will free the tasks ret_stack pointer. Since that pointer is still
   using the parent's ret_stack, it mistakenly frees the parent's
   pointer too.

   Call ftrace_graph_init() on the task first which will NULL out the
   new tasks's ret_stack and if the copy fails, it will not free
   anything.

 - Remove FGRAPH_MAX_INDEX

   The macro FGRAPH_MAX_INDEX was added but never used. Remove it.

 - Save ent_size in function graph printing of nested functions

   The function graph tracer needs to look at the next event to see if
   the next event is the return of the current function entry. If it is,
   it prints a single line:

	ktime_get();

   Otherwise it prints it like a nested function:

	tick_nohz_irq_exit() {
	    ktime_get();
	    kcpustat_irq_exit();
	}

   In order to look at the next event, it must save the current event so
   that it has the information to print from it. It saves the event in
   the iterator descriptor called "ent". What it doesn't save is the
   ent_size of the event which is now used to know if the function graph
   arguments are to be printed. The peek doesn't save the size so the
   size used happens to be that of the size of the last event that was
   seen.

   Save the entry event size in the iterator descriptor so that the
   correct size is used.

 - Fix several errors with freeing data in the histogram code

   The histogram code had a lot of leaked or or incorrect accounting
   when failures happen. Correct them.

 - Fix histogram regression of .percent and .graph modifiers

   Up until 6.3 histogram values could have "percent" or "graph"
   modifiers that changed how they were printed. But a change that added
   restricting histograms values from being strings, stack traces and
   other modifiers inadvertently prevented them from using the percent
   and graph modifiers, which were legal use cases for values.

   Put back the percent and graph modifiers.

 - Fix various typos in the comments

 - Set the trace_clock before initializing a histogram with clock
   argument

   The histogram API allows the user to specific which trace clock to
   use via a "clock=" string. The histogram is set up first before the
   clock is checked. If the passed in clock is not valid, it exits
   without fully fixing up the histogram leaving it on the list and a
   use-after-free can trigger.

   Update the clock argument first and if it fails then exit gracefully
   before the histogram trigger is placed on any lists.

 - Restore :mod: trailer after parsing in ftrace_set_clr_event

   The function ftrace_set_clr_event() modifies the parse string and
   needs to put it back to what was passed in. It searches for ":mod:"
   via a strsep() but fails to put back the first ':' in the string.

   Add back the ':' in the passed in string.

 - Take trace_array reference when opening a tracer options file

   The options files are dynamically created and some tracers add their
   own options. When a tracer adds their own list of options, the
   trace_array holding them has an array to hold the list of options for
   each tracer. This array increases in size via a krealloc(), and the
   new entry gets a newly allocated array to hold the options of the new
   tracer being added.

   The element in each entry of the tracer's option array holds a
   pointer back to the trace_array, a pointer to the tracer it is
   associated to, a pointer to the flags of the option.

   The issue is that these arrays are freed when the trace_array is
   freed when its instance it represents is removed from the instances
   directory. There's a race that an open of one of these options files
   can happen when the instance is being removed.

   Add a new helper function to be called by the open function of the
   options file to iterate all existing trace_arrays under a lock and
   find the one that has the given option element in one of it's tracer
   arrays. If found, then update the associated trace_array's reference
   counter to keep it from being freed. If not found, have the open call
   return -ENODEV.

 - Disable interrupts when acquiring the lock in rb_wake_up_waiters()

   The function rb_wake_up_waiters() assumes it will be called in
   interrupt context and does not disable irqs when taking
   cpu_buffer->reader_lock, which can be called in hard interrupt
   context. The issue is in PREEMPT_RT, this function is called in
   thread context leaving this lock open to a deadlock.

   Take the lock with interrupts disabled.

 - Use rcu_assign_pointer() for tmp_ops filter hash

   The tmp_ops used in update_ftrace_direct_mod() assigns its
   filter_hash field directly, but that field is annotated as __rcu and
   sparse complains. Assign it with rcu_assign_pointer()

 - Fix use-after-free in enable_trigger_private_data_free()

   The trace_event_call is accessed through the event_trigger_data's
   trace_event_file pointer to put the trace_event_call on freeing. The
   issue is that the trace_event_file data may have been freed already
   causing a use-after-free. Add a field to the event_trigger_data that
   points directly to the trace_event_call so that it can decrement its
   reference directly without needing to go through the
   trace_event_file.

 - Fix accounting of buffer data remote headers

   trace_buffer_desc_size() and trace_remote_alloc_buffer() undercount
   the number of pages is needed for the asked for size as it doesn't
   take into account the meta data on each page. Add a helper function
   to do the calculation properly and use that in these functions.

 - Catch nr_page_va overflow in ring_buffer_desc sizing

   The number of pages per remote ring buffer is capped by
   ring_buffer_desc::nr_page_va (32 bits). A buffer_size large enough to
   overflow that field would silently allocate a descriptor smaller than
   what was asked for.

 - Do not resize the subbuf order if any per_cpu buffer is disabled

   The mmapping of ring buffers disables resizing the subbuffers, but it
   is done per-cpu whereas the subbuf size change is done for all the
   per_cpu buffers under the buffer->mutex. It could change the size of
   some while the mapping is happening on others. Have the resize of the
   subbuf order check all the per_cpu buffers under the lock to see if
   any of them is disabled before starting and causing an inconsistency
   between buffers that are being mapped.

* tag 'trace-v7.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (25 commits)
  ring-buffer: Check resize_disabled before publishing the new subbuf order
  tracing/remotes: Catch nr_page_va overflow in ring_buffer_desc sizing
  tracing/remotes: Account for ring buffer page header in size calculation
  tracing: Don't dereference trace_event_file in deferred trigger free
  ftrace: Use rcu_assign_pointer() for tmp_ops filter hash
  ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters()
  tracing: Take trace_array reference when opening a tracer options file
  tracing: Fix ring_buffer_read_page_size() kernel-doc
  tracing: Restore :mod: trailer after parsing in ftrace_set_clr_event()
  tracing: Fix memory corruption from a "STACKTRACE" histogram key
  tracing: Fix memory corruption from the histogram stacktrace modifier
  tracing: Undo the registration when enabling the histogram trigger fails
  tracing: Take the reference before publishing the named histogram trigger
  tracing: Set the trace clock before registering the histogram trigger
  tracing: Fix typo "preceeded" in comment
  tracing: Fix typo "availabe" in comment
  tracing: Let histogram values keep the percent and graph modifiers
  tracing: Keep the entry count when the histogram stats allocation fails
  tracing: Free histogram the field rejected for a bad modifier
  tracing: Free histogram the var ref when its initialization fails
  ...

1 files changed, 415 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-tegra.c b/drivers/clocksource/timer-tegra.c
new file mode 100644
index 000000000..35b6ce9de
--- /dev/null
+++ b/drivers/clocksource/timer-tegra.c
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ */
+
+#define pr_fmt(fmt)	"tegra-timer: " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/percpu.h>
+#include <linux/sched_clock.h>
+#include <linux/time.h>
+
+#include "timer-of.h"
+
+#define RTC_SECONDS		0x08
+#define RTC_SHADOW_SECONDS	0x0c
+#define RTC_MILLISECONDS	0x10
+
+#define TIMERUS_CNTR_1US	0x10
+#define TIMERUS_USEC_CFG	0x14
+#define TIMERUS_CNTR_FREEZE	0x4c
+
+#define TIMER_PTV		0x0
+#define TIMER_PTV_EN		BIT(31)
+#define TIMER_PTV_PER		BIT(30)
+#define TIMER_PCR		0x4
+#define TIMER_PCR_INTR_CLR	BIT(30)
+
+#define TIMER1_BASE		0x00
+#define TIMER2_BASE		0x08
+#define TIMER3_BASE		0x50
+#define TIMER4_BASE		0x58
+#define TIMER10_BASE		0x90
+
+#define TIMER1_IRQ_IDX		0
+#define TIMER10_IRQ_IDX		10
+
+#define TIMER_1MHz		1000000
+
+static u32 usec_config;
+static void __iomem *timer_reg_base;
+
+static int tegra_timer_set_next_event(unsigned long cycles,
+				      struct clock_event_device *evt)
+{
+	void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+	/*
+	 * Tegra's timer uses n+1 scheme for the counter, i.e. timer will
+	 * fire after one tick if 0 is loaded.
+	 *
+	 * The minimum and maximum numbers of oneshot ticks are defined
+	 * by clockevents_config_and_register(1, 0x1fffffff + 1) invocation
+	 * below in the code. Hence the cycles (ticks) can't be outside of
+	 * a range supportable by hardware.
+	 */
+	writel_relaxed(TIMER_PTV_EN | (cycles - 1), reg_base + TIMER_PTV);
+
+	return 0;
+}
+
+static int tegra_timer_shutdown(struct clock_event_device *evt)
+{
+	void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+	writel_relaxed(0, reg_base + TIMER_PTV);
+
+	return 0;
+}
+
+static int tegra_timer_set_periodic(struct clock_event_device *evt)
+{
+	void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+	unsigned long period = timer_of_period(to_timer_of(evt));
+
+	writel_relaxed(TIMER_PTV_EN | TIMER_PTV_PER | (period - 1),
+		       reg_base + TIMER_PTV);
+
+	return 0;
+}
+
+static irqreturn_t tegra_timer_isr(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+	writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void tegra_timer_suspend(struct clock_event_device *evt)
+{
+	void __iomem *reg_base = timer_of_base(to_timer_of(evt));
+
+	writel_relaxed(TIMER_PCR_INTR_CLR, reg_base + TIMER_PCR);
+}
+
+static void tegra_timer_resume(struct clock_event_device *evt)
+{
+	writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
+}
+
+static DEFINE_PER_CPU(struct timer_of, tegra_to) = {
+	.flags = TIMER_OF_CLOCK | TIMER_OF_BASE,
+
+	.clkevt = {
+		.name = "tegra_timer",
+		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+		.set_next_event = tegra_timer_set_next_event,
+		.set_state_shutdown = tegra_timer_shutdown,
+		.set_state_periodic = tegra_timer_set_periodic,
+		.set_state_oneshot = tegra_timer_shutdown,
+		.tick_resume = tegra_timer_shutdown,
+		.suspend = tegra_timer_suspend,
+		.resume = tegra_timer_resume,
+	},
+};
+
+static int tegra_timer_setup(unsigned int cpu)
+{
+	struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
+
+	writel_relaxed(0, timer_of_base(to) + TIMER_PTV);
+	writel_relaxed(TIMER_PCR_INTR_CLR, timer_of_base(to) + TIMER_PCR);
+
+	irq_force_affinity(to->clkevt.irq, cpumask_of(cpu));
+	enable_irq(to->clkevt.irq);
+
+	/*
+	 * Tegra's timer uses n+1 scheme for the counter, i.e. timer will
+	 * fire after one tick if 0 is loaded and thus minimum number of
+	 * ticks is 1. In result both of the clocksource's tick limits are
+	 * higher than a minimum and maximum that hardware register can
+	 * take by 1, this is then taken into account by set_next_event
+	 * callback.
+	 */
+	clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+					1, /* min */
+					0x1fffffff + 1); /* max 29 bits + 1 */
+
+	return 0;
+}
+
+static int tegra_timer_stop(unsigned int cpu)
+{
+	struct timer_of *to = per_cpu_ptr(&tegra_to, cpu);
+
+	disable_irq_nosync(to->clkevt.irq);
+
+	return 0;
+}
+
+static u64 notrace tegra_read_sched_clock(void)
+{
+	return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
+}
+
+#ifdef CONFIG_ARM
+static unsigned long tegra_delay_timer_read_counter_long(void)
+{
+	return readl_relaxed(timer_reg_base + TIMERUS_CNTR_1US);
+}
+
+static struct delay_timer tegra_delay_timer = {
+	.read_current_timer = tegra_delay_timer_read_counter_long,
+	.freq = TIMER_1MHz,
+};
+#endif
+
+static struct timer_of suspend_rtc_to = {
+	.flags = TIMER_OF_BASE | TIMER_OF_CLOCK,
+};
+
+/*
+ * tegra_rtc_read - Reads the Tegra RTC registers
+ * Care must be taken that this function is not called while the
+ * tegra_rtc driver could be executing to avoid race conditions
+ * on the RTC shadow register
+ */
+static u64 tegra_rtc_read_ms(struct clocksource *cs)
+{
+	void __iomem *reg_base = timer_of_base(&suspend_rtc_to);
+
+	u32 ms = readl_relaxed(reg_base + RTC_MILLISECONDS);
+	u32 s = readl_relaxed(reg_base + RTC_SHADOW_SECONDS);
+
+	return (u64)s * MSEC_PER_SEC + ms;
+}
+
+static struct clocksource suspend_rtc_clocksource = {
+	.name	= "tegra_suspend_timer",
+	.rating	= 200,
+	.read	= tegra_rtc_read_ms,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+};
+
+static inline unsigned int tegra_base_for_cpu(int cpu, bool tegra20)
+{
+	if (tegra20) {
+		switch (cpu) {
+		case 0:
+			return TIMER1_BASE;
+		case 1:
+			return TIMER2_BASE;
+		case 2:
+			return TIMER3_BASE;
+		default:
+			return TIMER4_BASE;
+		}
+	}
+
+	return TIMER10_BASE + cpu * 8;
+}
+
+static inline unsigned int tegra_irq_idx_for_cpu(int cpu, bool tegra20)
+{
+	if (tegra20)
+		return TIMER1_IRQ_IDX + cpu;
+
+	return TIMER10_IRQ_IDX + cpu;
+}
+
+static inline unsigned long tegra_rate_for_timer(struct timer_of *to,
+						 bool tegra20)
+{
+	/*
+	 * TIMER1-9 are fixed to 1MHz, TIMER10-13 are running off the
+	 * parent clock.
+	 */
+	if (tegra20)
+		return TIMER_1MHz;
+
+	return timer_of_rate(to);
+}
+
+static int __init tegra_init_timer(struct device_node *np, bool tegra20,
+				   int rating)
+{
+	struct timer_of *to;
+	int cpu, ret;
+
+	to = this_cpu_ptr(&tegra_to);
+	ret = timer_of_init(np, to);
+	if (ret)
+		goto out;
+
+	timer_reg_base = timer_of_base(to);
+
+	/*
+	 * Configure microsecond timers to have 1MHz clock
+	 * Config register is 0xqqww, where qq is "dividend", ww is "divisor"
+	 * Uses n+1 scheme
+	 */
+	switch (timer_of_rate(to)) {
+	case 12000000:
+		usec_config = 0x000b; /* (11+1)/(0+1) */
+		break;
+	case 12800000:
+		usec_config = 0x043f; /* (63+1)/(4+1) */
+		break;
+	case 13000000:
+		usec_config = 0x000c; /* (12+1)/(0+1) */
+		break;
+	case 16800000:
+		usec_config = 0x0453; /* (83+1)/(4+1) */
+		break;
+	case 19200000:
+		usec_config = 0x045f; /* (95+1)/(4+1) */
+		break;
+	case 26000000:
+		usec_config = 0x0019; /* (25+1)/(0+1) */
+		break;
+	case 38400000:
+		usec_config = 0x04bf; /* (191+1)/(4+1) */
+		break;
+	case 48000000:
+		usec_config = 0x002f; /* (47+1)/(0+1) */
+		break;
+	default:
+		ret = -EINVAL;
+		goto out;
+	}
+
+	writel_relaxed(usec_config, timer_reg_base + TIMERUS_USEC_CFG);
+
+	for_each_possible_cpu(cpu) {
+		struct timer_of *cpu_to = per_cpu_ptr(&tegra_to, cpu);
+		unsigned long flags = IRQF_TIMER | IRQF_NOBALANCING;
+		unsigned long rate = tegra_rate_for_timer(to, tegra20);
+		unsigned int base = tegra_base_for_cpu(cpu, tegra20);
+		unsigned int idx = tegra_irq_idx_for_cpu(cpu, tegra20);
+		unsigned int irq = irq_of_parse_and_map(np, idx);
+
+		if (!irq) {
+			pr_err("failed to map irq for cpu%d\n", cpu);
+			ret = -EINVAL;
+			goto out_irq;
+		}
+
+		cpu_to->clkevt.irq = irq;
+		cpu_to->clkevt.rating = rating;
+		cpu_to->clkevt.cpumask = cpumask_of(cpu);
+		cpu_to->of_base.base = timer_reg_base + base;
+		cpu_to->of_clk.period = rate / HZ;
+		cpu_to->of_clk.rate = rate;
+
+		irq_set_status_flags(cpu_to->clkevt.irq, IRQ_NOAUTOEN);
+
+		ret = request_irq(cpu_to->clkevt.irq, tegra_timer_isr, flags,
+				  cpu_to->clkevt.name, &cpu_to->clkevt);
+		if (ret) {
+			pr_err("failed to set up irq for cpu%d: %d\n",
+			       cpu, ret);
+			irq_dispose_mapping(cpu_to->clkevt.irq);
+			cpu_to->clkevt.irq = 0;
+			goto out_irq;
+		}
+	}
+
+	sched_clock_register(tegra_read_sched_clock, 32, TIMER_1MHz);
+
+	ret = clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
+				    "timer_us", TIMER_1MHz, 300, 32,
+				    clocksource_mmio_readl_up);
+	if (ret)
+		pr_err("failed to register clocksource: %d\n", ret);
+
+#ifdef CONFIG_ARM
+	register_current_timer_delay(&tegra_delay_timer);
+#endif
+
+	ret = cpuhp_setup_state(CPUHP_AP_TEGRA_TIMER_STARTING,
+				"AP_TEGRA_TIMER_STARTING", tegra_timer_setup,
+				tegra_timer_stop);
+	if (ret)
+		pr_err("failed to set up cpu hp state: %d\n", ret);
+
+	return ret;
+
+out_irq:
+	for_each_possible_cpu(cpu) {
+		struct timer_of *cpu_to;
+
+		cpu_to = per_cpu_ptr(&tegra_to, cpu);
+		if (cpu_to->clkevt.irq) {
+			free_irq(cpu_to->clkevt.irq, &cpu_to->clkevt);
+			irq_dispose_mapping(cpu_to->clkevt.irq);
+		}
+	}
+
+	to->of_base.base = timer_reg_base;
+out:
+	timer_of_cleanup(to);
+
+	return ret;
+}
+
+static int __init tegra210_init_timer(struct device_node *np)
+{
+	/*
+	 * Arch-timer can't survive across power cycle of CPU core and
+	 * after CPUPORESET signal due to a system design shortcoming,
+	 * hence tegra-timer is more preferable on Tegra210.
+	 */
+	return tegra_init_timer(np, false, 460);
+}
+TIMER_OF_DECLARE(tegra210_timer, "nvidia,tegra210-timer", tegra210_init_timer);
+
+static int __init tegra20_init_timer(struct device_node *np)
+{
+	int rating;
+
+	/*
+	 * Tegra20 and Tegra30 have Cortex A9 CPU that has a TWD timer,
+	 * that timer runs off the CPU clock and hence is subjected to
+	 * a jitter caused by DVFS clock rate changes. Tegra-timer is
+	 * more preferable for older Tegra's, while later SoC generations
+	 * have arch-timer as a main per-CPU timer and it is not affected
+	 * by DVFS changes.
+	 */
+	if (of_machine_is_compatible("nvidia,tegra20") ||
+	    of_machine_is_compatible("nvidia,tegra30"))
+		rating = 460;
+	else
+		rating = 330;
+
+	return tegra_init_timer(np, true, rating);
+}
+TIMER_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static int __init tegra20_init_rtc(struct device_node *np)
+{
+	int ret;
+
+	ret = timer_of_init(np, &suspend_rtc_to);
+	if (ret)
+		return ret;
+
+	return clocksource_register_hz(&suspend_rtc_clocksource, 1000);
+}
+TIMER_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);