diff options
| author | Niklas Cassel <cassel@kernel.org> | 2026-09-18 16:06:42 +0200 |
|---|---|---|
| committer | Jens Axboe <axboe@kernel.dk> | 2026-09-29 12:54:47 -0600 |
| commit | 684b413b5483f57c890c171b9400076a0143b918 (patch) | |
| tree | f167daddad3dce9af44773541373eafbccc9ac61 /drivers/clocksource/timer-sun4i.c | |
| download | linux-stable-684b413b5483f57c890c171b9400076a0143b918.tar.gz linux-stable-684b413b5483f57c890c171b9400076a0143b918.zip | |
virtio_blk: set the zone write granularitygrafted
virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:
if (lim->zone_write_granularity < lim->logical_block_size)
lim->zone_write_granularity = lim->logical_block_size;
A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.
bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.
zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.
sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.
Set the zone write granularity from the value that the device reports.
Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'drivers/clocksource/timer-sun4i.c')
| -rw-r--r-- | drivers/clocksource/timer-sun4i.c | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/drivers/clocksource/timer-sun4i.c b/drivers/clocksource/timer-sun4i.c new file mode 100644 index 000000000..c2d04ab7c --- /dev/null +++ b/drivers/clocksource/timer-sun4i.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Allwinner A1X SoCs timer handling. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Benn Huang <benn@allwinnertech.com> + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include "timer-of.h" + +#define TIMER_IRQ_EN_REG 0x00 +#define TIMER_IRQ_EN(val) BIT(val) +#define TIMER_IRQ_ST_REG 0x04 +#define TIMER_IRQ_CLEAR(val) BIT(val) +#define TIMER_CTL_REG(val) (0x10 * val + 0x10) +#define TIMER_CTL_ENABLE BIT(0) +#define TIMER_CTL_RELOAD BIT(1) +#define TIMER_CTL_CLK_SRC(val) (((val) & 0x3) << 2) +#define TIMER_CTL_CLK_SRC_OSC24M (1) +#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4) +#define TIMER_CTL_ONESHOT BIT(7) +#define TIMER_INTVAL_REG(val) (0x10 * (val) + 0x14) +#define TIMER_CNTVAL_REG(val) (0x10 * (val) + 0x18) + +#define TIMER_SYNC_TICKS 3 + +/* + * When we disable a timer, we need to wait at least for 2 cycles of + * the timer source clock. We will use for that the clocksource timer + * that is already setup and runs at the same frequency than the other + * timers, and we never will be disabled. + */ +static void sun4i_clkevt_sync(void __iomem *base) +{ + u32 old = readl(base + TIMER_CNTVAL_REG(1)); + + while ((old - readl(base + TIMER_CNTVAL_REG(1))) < TIMER_SYNC_TICKS) + cpu_relax(); +} + +static void sun4i_clkevt_time_stop(void __iomem *base, u8 timer) +{ + u32 val = readl(base + TIMER_CTL_REG(timer)); + writel(val & ~TIMER_CTL_ENABLE, base + TIMER_CTL_REG(timer)); + sun4i_clkevt_sync(base); +} + +static void sun4i_clkevt_time_setup(void __iomem *base, u8 timer, + unsigned long delay) +{ + writel(delay, base + TIMER_INTVAL_REG(timer)); +} + +static void sun4i_clkevt_time_start(void __iomem *base, u8 timer, + bool periodic) +{ + u32 val = readl(base + TIMER_CTL_REG(timer)); + + if (periodic) + val &= ~TIMER_CTL_ONESHOT; + else + val |= TIMER_CTL_ONESHOT; + + writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD, + base + TIMER_CTL_REG(timer)); +} + +static int sun4i_clkevt_shutdown(struct clock_event_device *evt) +{ + struct timer_of *to = to_timer_of(evt); + + sun4i_clkevt_time_stop(timer_of_base(to), 0); + + return 0; +} + +static int sun4i_clkevt_set_oneshot(struct clock_event_device *evt) +{ + struct timer_of *to = to_timer_of(evt); + + sun4i_clkevt_time_stop(timer_of_base(to), 0); + sun4i_clkevt_time_start(timer_of_base(to), 0, false); + + return 0; +} + +static int sun4i_clkevt_set_periodic(struct clock_event_device *evt) +{ + struct timer_of *to = to_timer_of(evt); + + sun4i_clkevt_time_stop(timer_of_base(to), 0); + sun4i_clkevt_time_setup(timer_of_base(to), 0, timer_of_period(to)); + sun4i_clkevt_time_start(timer_of_base(to), 0, true); + + return 0; +} + +static int sun4i_clkevt_next_event(unsigned long evt, + struct clock_event_device *clkevt) +{ + struct timer_of *to = to_timer_of(clkevt); + + sun4i_clkevt_time_stop(timer_of_base(to), 0); + sun4i_clkevt_time_setup(timer_of_base(to), 0, evt - TIMER_SYNC_TICKS); + sun4i_clkevt_time_start(timer_of_base(to), 0, false); + + return 0; +} + +static void sun4i_timer_clear_interrupt(void __iomem *base) +{ + writel(TIMER_IRQ_CLEAR(0), base + TIMER_IRQ_ST_REG); +} + +static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + struct timer_of *to = to_timer_of(evt); + + sun4i_timer_clear_interrupt(timer_of_base(to)); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct timer_of to = { + .flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE, + + .clkevt = { + .name = "sun4i_tick", + .rating = 350, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_DYNIRQ, + .set_state_shutdown = sun4i_clkevt_shutdown, + .set_state_periodic = sun4i_clkevt_set_periodic, + .set_state_oneshot = sun4i_clkevt_set_oneshot, + .tick_resume = sun4i_clkevt_shutdown, + .set_next_event = sun4i_clkevt_next_event, + .cpumask = cpu_possible_mask, + }, + + .of_irq = { + .handler = sun4i_timer_interrupt, + .flags = IRQF_TIMER | IRQF_IRQPOLL, + }, +}; + +static u64 notrace sun4i_timer_sched_read(void) +{ + return ~readl(timer_of_base(&to) + TIMER_CNTVAL_REG(1)); +} + +static int __init sun4i_timer_init(struct device_node *node) +{ + int ret; + u32 val; + + ret = timer_of_init(node, &to); + if (ret) + return ret; + + writel(~0, timer_of_base(&to) + TIMER_INTVAL_REG(1)); + writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD | + TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), + timer_of_base(&to) + TIMER_CTL_REG(1)); + + /* + * sched_clock_register does not have priorities, and on sun6i and + * later there is a better sched_clock registered by arm_arch_timer.c + */ + if (of_machine_is_compatible("allwinner,sun4i-a10") || + of_machine_is_compatible("allwinner,sun5i-a13") || + of_machine_is_compatible("allwinner,sun5i-a10s") || + of_machine_is_compatible("allwinner,suniv-f1c100s")) + sched_clock_register(sun4i_timer_sched_read, 32, + timer_of_rate(&to)); + + ret = clocksource_mmio_init(timer_of_base(&to) + TIMER_CNTVAL_REG(1), + node->name, timer_of_rate(&to), 350, 32, + clocksource_mmio_readl_down); + if (ret) { + pr_err("Failed to register clocksource\n"); + return ret; + } + + writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M), + timer_of_base(&to) + TIMER_CTL_REG(0)); + + /* Make sure timer is stopped before playing with interrupts */ + sun4i_clkevt_time_stop(timer_of_base(&to), 0); + + /* clear timer0 interrupt */ + sun4i_timer_clear_interrupt(timer_of_base(&to)); + + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), + TIMER_SYNC_TICKS + 1, 0xffffffff); + + /* Enable timer0 interrupt */ + val = readl(timer_of_base(&to) + TIMER_IRQ_EN_REG); + writel(val | TIMER_IRQ_EN(0), timer_of_base(&to) + TIMER_IRQ_EN_REG); + + return ret; +} +TIMER_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer", + sun4i_timer_init); +TIMER_OF_DECLARE(sun8i_a23, "allwinner,sun8i-a23-timer", + sun4i_timer_init); +TIMER_OF_DECLARE(sun8i_v3s, "allwinner,sun8i-v3s-timer", + sun4i_timer_init); +TIMER_OF_DECLARE(suniv, "allwinner,suniv-f1c100s-timer", + sun4i_timer_init); |
