Merge tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-tracegrafted

Pull tracing fixes from Steven Rostedt:

 - Fix error output of boot instance creation failure

   Currently if a boot instance creation fails, instead of printing out
   the name of the instance that failed, it prints "(null)". That is
   because it prints "cur_str" that had already been processed by
   strsep(). Print the saved name instead.

   While at it, print the error code of the failure.

 - Fix use-after-free for same named historgrams

   Histograms can be named so that they can be used in multiple events.
   But if the named histogram has a variable attached, the second event
   that uses the named histogram which duplicates it and needs to free
   the original after duplication leaves the old variable in place and
   still visible. If another histogram uses than variable, it will use
   the stale one which will try to reference the freed duplicate
   histogram and crash the kernel.

   Free the duplicate variables along with the duplicated histogram
   data.

 - Check return value of kthread_run() in event self test

   The events self tests uses a kthread for testing but does not check
   if it succeeded in creating a kthread. If the kthread creation were
   to fail, the code will still try to call kthread_stop() on the error
   returned.

 - Fix race between reading trace_pipe and updating subbuffer size

   If a user is reading the trace_pipe file at the same time they update
   the ring buffer sub-buffer size, can cause the trace_pipe read to
   read stale data. Add trace_access_lock() around updating the ring
   buffer sub-buffer size.

 - Fix eventfs_inode on failure path in creation of the events directory

   In the creation of the "events" directory, if after allocating the
   eventfs_inode a failure is detected, it calls cleanup_ei() which
   calls free_ei(). The free_ei() will test if eventfs_inode being freed
   has no children. It is a bug if it does. But on the failure case of
   the creation of the "events" directory, the children lists have not
   yet been initialized and the free will trigger a warning because
   list_empty() on an uninitialized list returns false.

   Move the initialization into init_ei() where it makes more sense and
   makes sure that a created eventfs_inode has its lists initialized
   upon creation.

 - Check return value of kthread_run() in ftrace direct sample code

   The sample code that shows how to use the ftrace direct calls does
   not test the return of kthread_run() to see if it succeeds. Return a
   failure if the kthread_run() doesn't succeed.

 - Clear user events state on fork in case of alloc failure

   On fork, the child gets a pointer to the parent's user events state.
   It makes a copy of it then updates the child's pointer to it. But if
   the allocation fails, the duplication function leaves the child with
   a pointer to its parent's descriptor. When the child cleans up its
   data, it will free the parent's descriptor while the parent is still
   using it.

   In the duplication function, set the child's user_event_mm to NULL
   before testing if the allocation succeeded, and when it exits it will
   not free the parent's descriptor.

 - Fix retry exhaustion in simple ring buffer reader swap

   simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
   post-decrements it only after a failed link replacement. On the final
   attempt, a successful replacement leaves retry at zero, while a
   failed replacement leaves it at -1.

   But the check for success expects the retry value to be non-zero and
   exits with an error on zero. This is the opposite result. Fix it.

 - Fail nicely when the remote swap_reader_page() returns an error

   Currently, if the swap_reader_page() of a remote buffer fails, it
   triggers a WARN_ON_ONCE() and continues normally. Instead, have it
   exit with an error and a pr_warn() print instead of a full WARNING.

* tag 'trace-v7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Stop remote reader update when page swap fails
  tracing: Fix retry exhaustion in simple ring buffer reader swap
  tracing/user_events: Clear copied tracing state before fork duplication
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-multi-modify
  samples/ftrace: Fix kthread_stop() on ERR_PTR in ftrace-direct-modify
  eventfs: Initialize ei->children and ei->list in init_ei()
  tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
  tracing: Fix crash passing ERR_PTR to kthread_stop()
  tracing: Fix use-after-free with same-name named triggers
  tracing: Fix logged instance name on creation failure

1 files changed, 292 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-stm32-lp.c b/drivers/clocksource/timer-stm32-lp.c
new file mode 100644
index 000000000..3d804128c
--- /dev/null
+++ b/drivers/clocksource/timer-stm32-lp.c
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ *	    Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+
+#define CFGR_PSC_OFFSET		9
+#define STM32_LP_RATING		1000
+#define STM32_TARGET_CLKRATE	(32000 * HZ)
+#define STM32_LP_MAX_PSC	7
+
+struct stm32_lp_private {
+	struct regmap *reg;
+	struct clock_event_device clkevt;
+	unsigned long period;
+	u32 psc;
+	struct device *dev;
+	struct clk *clk;
+	u32 version;
+};
+
+static struct stm32_lp_private*
+to_priv(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct stm32_lp_private, clkevt);
+}
+
+static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	regmap_write(priv->reg, STM32_LPTIM_IER, 0);
+	/* clear pending flags */
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	return 0;
+}
+
+static int stm32mp25_clkevent_lp_set_evt(struct stm32_lp_private *priv, unsigned long evt)
+{
+	int ret;
+	u32 val;
+
+	regmap_read(priv->reg, STM32_LPTIM_CR, &val);
+	if (!FIELD_GET(STM32_LPTIM_ENABLE, val)) {
+		/* Enable LPTIMER to be able to write into IER and ARR registers */
+		regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
+		/*
+		 * After setting the ENABLE bit, a delay of two counter clock cycles is needed
+		 * before the LPTIM is actually enabled. For 32KHz rate, this makes approximately
+		 * 62.5 micro-seconds, round it up.
+		 */
+		udelay(63);
+	}
+	/* set next event counter */
+	regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
+	/* enable ARR interrupt */
+	regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
+
+	/* Poll DIEROK and ARROK to ensure register access has completed */
+	ret = regmap_read_poll_timeout_atomic(priv->reg, STM32_LPTIM_ISR, val,
+					      (val & STM32_LPTIM_DIEROK_ARROK) ==
+					      STM32_LPTIM_DIEROK_ARROK,
+					      10, 500);
+	if (ret) {
+		dev_err(priv->dev, "access to LPTIM timed out\n");
+		/* Disable LPTIMER */
+		regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+		return ret;
+	}
+	/* Clear DIEROK and ARROK flags */
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_DIEROKCF_ARROKCF);
+
+	return 0;
+}
+
+static void stm32_clkevent_lp_set_evt(struct stm32_lp_private *priv, unsigned long evt)
+{
+	/* disable LPTIMER to be able to write into IER register*/
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	/* enable ARR interrupt */
+	regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
+	/* enable LPTIMER to be able to write into ARR register */
+	regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
+	/* set next event counter */
+	regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
+}
+
+static int stm32_clkevent_lp_set_timer(unsigned long evt,
+				       struct clock_event_device *clkevt,
+				       int is_periodic)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+	int ret;
+
+	if (priv->version == STM32_LPTIM_VERR_23) {
+		ret = stm32mp25_clkevent_lp_set_evt(priv, evt);
+		if (ret)
+			return ret;
+	} else {
+		stm32_clkevent_lp_set_evt(priv, evt);
+	}
+
+	/* start counter */
+	if (is_periodic)
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
+	else
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
+{
+	return stm32_clkevent_lp_set_timer(evt, clkevt,
+					   clockevent_state_periodic(clkevt));
+}
+
+static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, true);
+}
+
+static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, false);
+}
+
+static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	if (clkevt->event_handler)
+		clkevt->event_handler(clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv,
+					    unsigned long *rate)
+{
+	int i;
+
+	for (i = 0; i <= STM32_LP_MAX_PSC; i++) {
+		if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE)
+			break;
+	}
+
+	regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET);
+
+	/* Adjust rate and period given the prescaler value */
+	*rate = DIV_ROUND_CLOSEST(*rate, (1 << i));
+	priv->period = DIV_ROUND_UP(*rate, HZ);
+	priv->psc = i;
+}
+
+static void stm32_clkevent_lp_suspend(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	stm32_clkevent_lp_shutdown(clkevt);
+
+	/* balance clk_prepare_enable() from the probe */
+	clk_disable_unprepare(priv->clk);
+}
+
+static void stm32_clkevent_lp_resume(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	clk_prepare_enable(priv->clk);
+
+	/* restore prescaler */
+	regmap_write(priv->reg, STM32_LPTIM_CFGR, priv->psc << CFGR_PSC_OFFSET);
+}
+
+static void stm32_clkevent_lp_init(struct stm32_lp_private *priv,
+				  struct device_node *np, unsigned long rate)
+{
+	priv->clkevt.name = np->full_name;
+	priv->clkevt.cpumask = cpu_possible_mask;
+	priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+				CLOCK_EVT_FEAT_ONESHOT;
+	priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown;
+	priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic;
+	priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot;
+	priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event;
+	priv->clkevt.rating = STM32_LP_RATING;
+	priv->clkevt.suspend = stm32_clkevent_lp_suspend;
+	priv->clkevt.resume = stm32_clkevent_lp_resume;
+	priv->clkevt.owner = THIS_MODULE;
+
+	clockevents_config_and_register(&priv->clkevt, rate, 0x1,
+					STM32_LPTIM_MAX_ARR);
+}
+
+static int stm32_clkevent_lp_probe(struct platform_device *pdev)
+{
+	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_lp_private *priv;
+	unsigned long rate;
+	int ret, irq;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reg = ddata->regmap;
+	priv->version = ddata->version;
+	priv->clk = ddata->clk;
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return -EINVAL;
+
+	rate = clk_get_rate(priv->clk);
+	if (!rate) {
+		ret = -EINVAL;
+		goto out_clk_disable;
+	}
+
+	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+	if (irq <= 0) {
+		ret = irq;
+		goto out_clk_disable;
+	}
+
+	if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) {
+		device_set_wakeup_capable(&pdev->dev, true);
+
+		ret = dev_pm_set_wake_irq(&pdev->dev, irq);
+		if (ret)
+			goto out_clk_disable;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler,
+			       IRQF_TIMER, pdev->name, &priv->clkevt);
+	if (ret)
+		goto out_clk_disable;
+
+	stm32_clkevent_lp_set_prescaler(priv, &rate);
+
+	stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate);
+
+	priv->dev = &pdev->dev;
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static const struct of_device_id stm32_clkevent_lp_of_match[] = {
+	{ .compatible = "st,stm32-lptimer-timer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
+
+static struct platform_driver stm32_clkevent_lp_driver = {
+	.probe  = stm32_clkevent_lp_probe,
+	.driver	= {
+		.name = "stm32-lptimer-timer",
+		.of_match_table = stm32_clkevent_lp_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+module_platform_driver(stm32_clkevent_lp_driver);
+
+MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver");