virtio_blk: set the zone write granularitygrafted

virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:

	if (lim->zone_write_granularity < lim->logical_block_size)
		lim->zone_write_granularity = lim->logical_block_size;

A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.

bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.

zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.

sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.

Set the zone write granularity from the value that the device reports.

Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

1 files changed, 223 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-of.c b/drivers/clocksource/timer-of.c
new file mode 100644
index 000000000..ba6343321
--- /dev/null
+++ b/drivers/clocksource/timer-of.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, Linaro Ltd.  All rights reserved.
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
+
+/**
+ * timer_of_irq_exit - Release the interrupt
+ * @of_irq: an of_timer_irq structure pointer
+ *
+ * Free the irq resource
+ */
+static void timer_of_irq_exit(struct of_timer_irq *of_irq)
+{
+	struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
+
+	struct clock_event_device *clkevt = &to->clkevt;
+
+	free_irq(of_irq->irq, clkevt);
+}
+
+/**
+ * timer_of_irq_init - Request the interrupt
+ * @np: a device tree node pointer
+ * @of_irq: an of_timer_irq structure pointer
+ *
+ * Get the interrupt number from the DT from its definition and
+ * request it. The interrupt is gotten by falling back the following way:
+ *
+ * - Get interrupt number by name
+ * - Get interrupt number by index
+ *
+ * Returns 0 on success, < 0 otherwise
+ */
+static int timer_of_irq_init(struct device_node *np,
+			     struct of_timer_irq *of_irq)
+{
+	int ret;
+	struct timer_of *to = container_of(of_irq, struct timer_of, of_irq);
+	struct clock_event_device *clkevt = &to->clkevt;
+
+	if (of_irq->name) {
+		of_irq->irq = ret = of_irq_get_byname(np, of_irq->name);
+		if (ret < 0) {
+			pr_err("Failed to get interrupt %s for %pOF\n",
+			       of_irq->name, np);
+			return ret;
+		}
+	} else	{
+		of_irq->irq = irq_of_parse_and_map(np, of_irq->index);
+	}
+	if (!of_irq->irq) {
+		pr_err("Failed to map interrupt for %pOF\n", np);
+		return -EINVAL;
+	}
+
+	ret = request_irq(of_irq->irq, of_irq->handler,
+			  of_irq->flags ? of_irq->flags : IRQF_TIMER,
+			  np->full_name, clkevt);
+	if (ret) {
+		pr_err("Failed to request irq %d for %pOF\n", of_irq->irq, np);
+		return ret;
+	}
+
+	clkevt->irq = of_irq->irq;
+
+	return 0;
+}
+
+/**
+ * timer_of_clk_exit - Release the clock resources
+ * @of_clk: a of_timer_clk structure pointer
+ *
+ * Disables and releases the refcount on the clk
+ */
+static void timer_of_clk_exit(struct of_timer_clk *of_clk)
+{
+	of_clk->rate = 0;
+	clk_disable_unprepare(of_clk->clk);
+	clk_put(of_clk->clk);
+}
+
+/**
+ * timer_of_clk_init - Initialize the clock resources
+ * @np: a device tree node pointer
+ * @of_clk: a of_timer_clk structure pointer
+ *
+ * Get the clock by name or by index, enable it and get the rate
+ *
+ * Returns 0 on success, < 0 otherwise
+ */
+static int timer_of_clk_init(struct device_node *np,
+			     struct of_timer_clk *of_clk)
+{
+	int ret;
+
+	of_clk->clk = of_clk->name ? of_clk_get_by_name(np, of_clk->name) :
+		of_clk_get(np, of_clk->index);
+	if (IS_ERR(of_clk->clk)) {
+		ret = PTR_ERR(of_clk->clk);
+		if (ret != -EPROBE_DEFER)
+			pr_err("Failed to get clock for %pOF\n", np);
+		goto out;
+	}
+
+	ret = clk_prepare_enable(of_clk->clk);
+	if (ret) {
+		pr_err("Failed for enable clock for %pOF\n", np);
+		goto out_clk_put;
+	}
+
+	of_clk->rate = clk_get_rate(of_clk->clk);
+	if (!of_clk->rate) {
+		ret = -EINVAL;
+		pr_err("Failed to get clock rate for %pOF\n", np);
+		goto out_clk_disable;
+	}
+
+	of_clk->period = DIV_ROUND_UP(of_clk->rate, HZ);
+out:
+	return ret;
+
+out_clk_disable:
+	clk_disable_unprepare(of_clk->clk);
+out_clk_put:
+	clk_put(of_clk->clk);
+
+	goto out;
+}
+
+static void timer_of_base_exit(struct of_timer_base *of_base)
+{
+	iounmap(of_base->base);
+}
+
+static  int timer_of_base_init(struct device_node *np,
+			       struct of_timer_base *of_base)
+{
+	of_base->base = of_base->name ?
+		of_io_request_and_map(np, of_base->index, of_base->name) :
+		of_iomap(np, of_base->index);
+	if (IS_ERR_OR_NULL(of_base->base)) {
+		pr_err("Failed to iomap (%s:%s)\n", np->name, of_base->name);
+		return of_base->base ? PTR_ERR(of_base->base) : -ENOMEM;
+	}
+
+	return 0;
+}
+
+int timer_of_init(struct device_node *np, struct timer_of *to)
+{
+	int ret = -EINVAL;
+	int flags = 0;
+
+	if (to->flags & TIMER_OF_BASE) {
+		ret = timer_of_base_init(np, &to->of_base);
+		if (ret)
+			goto out_fail;
+		flags |= TIMER_OF_BASE;
+	}
+
+	if (to->flags & TIMER_OF_CLOCK) {
+		ret = timer_of_clk_init(np, &to->of_clk);
+		if (ret)
+			goto out_fail;
+		flags |= TIMER_OF_CLOCK;
+	}
+
+	if (to->flags & TIMER_OF_IRQ) {
+		ret = timer_of_irq_init(np, &to->of_irq);
+		if (ret)
+			goto out_fail;
+		flags |= TIMER_OF_IRQ;
+	}
+
+	if (!to->clkevt.name)
+		to->clkevt.name = np->full_name;
+
+	to->np = np;
+
+	return ret;
+
+out_fail:
+	if (flags & TIMER_OF_IRQ)
+		timer_of_irq_exit(&to->of_irq);
+
+	if (flags & TIMER_OF_CLOCK)
+		timer_of_clk_exit(&to->of_clk);
+
+	if (flags & TIMER_OF_BASE)
+		timer_of_base_exit(&to->of_base);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(timer_of_init);
+
+/**
+ * timer_of_cleanup - release timer_of resources
+ * @to: timer_of structure
+ *
+ * Release the resources that has been used in timer_of_init().
+ * This function should be called in init error cases
+ */
+void timer_of_cleanup(struct timer_of *to)
+{
+	if (to->flags & TIMER_OF_IRQ)
+		timer_of_irq_exit(&to->of_irq);
+
+	if (to->flags & TIMER_OF_CLOCK)
+		timer_of_clk_exit(&to->of_clk);
+
+	if (to->flags & TIMER_OF_BASE)
+		timer_of_base_exit(&to->of_base);
+}
+EXPORT_SYMBOL_GPL(timer_of_cleanup);