diff options
| author | Niklas Cassel <cassel@kernel.org> | 2026-09-18 16:06:42 +0200 |
|---|---|---|
| committer | Jens Axboe <axboe@kernel.dk> | 2026-09-29 12:54:47 -0600 |
| commit | 684b413b5483f57c890c171b9400076a0143b918 (patch) | |
| tree | f167daddad3dce9af44773541373eafbccc9ac61 /drivers/clocksource/timer-meson6.c | |
| download | linux-stable-684b413b5483f57c890c171b9400076a0143b918.tar.gz linux-stable-684b413b5483f57c890c171b9400076a0143b918.zip | |
virtio_blk: set the zone write granularitygrafted
virtblk_read_zoned_limits() reads the write granularity that the device
reports in virtio_blk_zoned_characteristics and assigns it to the
physical block size and to io_min, but never to the limit that is named
after it. queue_limits.zone_write_granularity is left at zero, so
blk_validate_zoned_limits() raises it to the logical block size:
if (lim->zone_write_granularity < lim->logical_block_size)
lim->zone_write_granularity = lim->logical_block_size;
A device that reports a granularity coarser than its logical block size,
which is what the field exists to express, therefore has it silently
reduced. A 512e host managed disk passed through to a guest reports a
logical block size of 512 and a write granularity of 4096, and the guest
ends up with a zone write granularity of 512.
bio_split_alignment() returns lim->zone_write_granularity if it is non-zero
and bio_split_io_at() may split a bio with as per bio_split_alignment().
This can real to the write getting rejected by the host drive, as the write
is not aligned to the physical block size.
zonefs also takes its block size from bdev_zone_write_granularity(), so it
would incorrectly use 512 on a disk that requires 4096.
sd_zbc_read_zones() sets the limit from the physical block size for the
same reason. NVMe ZNS and null_blk leave it unset, but the fallback
gives the right answer for them, as their write granularity is the
logical block size. virtio carries a separate value that may exceed it.
Set the zone write granularity from the value that the device reports.
Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://patch.msgid.link/20260918140641.2031075-2-cassel@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'drivers/clocksource/timer-meson6.c')
| -rw-r--r-- | drivers/clocksource/timer-meson6.c | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/drivers/clocksource/timer-meson6.c b/drivers/clocksource/timer-meson6.c new file mode 100644 index 000000000..99f5510a2 --- /dev/null +++ b/drivers/clocksource/timer-meson6.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic Meson6 SoCs timer handling. + * + * Copyright (C) 2014 Carlo Caione <carlo@caione.org> + * + * Based on code from Amlogic, Inc + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#ifdef CONFIG_ARM +#include <linux/delay.h> +#endif + +#define MESON_ISA_TIMER_MUX 0x00 +#define MESON_ISA_TIMER_MUX_TIMERD_EN BIT(19) +#define MESON_ISA_TIMER_MUX_TIMERC_EN BIT(18) +#define MESON_ISA_TIMER_MUX_TIMERB_EN BIT(17) +#define MESON_ISA_TIMER_MUX_TIMERA_EN BIT(16) +#define MESON_ISA_TIMER_MUX_TIMERD_MODE BIT(15) +#define MESON_ISA_TIMER_MUX_TIMERC_MODE BIT(14) +#define MESON_ISA_TIMER_MUX_TIMERB_MODE BIT(13) +#define MESON_ISA_TIMER_MUX_TIMERA_MODE BIT(12) +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK GENMASK(10, 8) +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_SYSTEM_CLOCK 0x0 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US 0x1 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_10US 0x2 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_100US 0x3 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1MS 0x4 +#define MESON_ISA_TIMER_MUX_TIMERD_INPUT_CLOCK_MASK GENMASK(7, 6) +#define MESON_ISA_TIMER_MUX_TIMERC_INPUT_CLOCK_MASK GENMASK(5, 4) +#define MESON_ISA_TIMER_MUX_TIMERB_INPUT_CLOCK_MASK GENMASK(3, 2) +#define MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK GENMASK(1, 0) +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US 0x0 +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_10US 0x1 +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_100US 0x0 +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1MS 0x3 + +#define MESON_ISA_TIMERA 0x04 +#define MESON_ISA_TIMERB 0x08 +#define MESON_ISA_TIMERC 0x0c +#define MESON_ISA_TIMERD 0x10 +#define MESON_ISA_TIMERE 0x14 + +static void __iomem *timer_base; + +#ifdef CONFIG_ARM +static unsigned long meson6_read_current_timer(void) +{ + return readl_relaxed(timer_base + MESON_ISA_TIMERE); +} + +static struct delay_timer meson6_delay_timer = { + .read_current_timer = meson6_read_current_timer, + .freq = 1000 * 1000, +}; +#endif + +static u64 notrace meson6_timer_sched_read(void) +{ + return (u64)readl(timer_base + MESON_ISA_TIMERE); +} + +static void meson6_clkevt_time_stop(void) +{ + u32 val = readl(timer_base + MESON_ISA_TIMER_MUX); + + writel(val & ~MESON_ISA_TIMER_MUX_TIMERA_EN, + timer_base + MESON_ISA_TIMER_MUX); +} + +static void meson6_clkevt_time_setup(unsigned long delay) +{ + writel(delay, timer_base + MESON_ISA_TIMERA); +} + +static void meson6_clkevt_time_start(bool periodic) +{ + u32 val = readl(timer_base + MESON_ISA_TIMER_MUX); + + if (periodic) + val |= MESON_ISA_TIMER_MUX_TIMERA_MODE; + else + val &= ~MESON_ISA_TIMER_MUX_TIMERA_MODE; + + writel(val | MESON_ISA_TIMER_MUX_TIMERA_EN, + timer_base + MESON_ISA_TIMER_MUX); +} + +static int meson6_shutdown(struct clock_event_device *evt) +{ + meson6_clkevt_time_stop(); + return 0; +} + +static int meson6_set_oneshot(struct clock_event_device *evt) +{ + meson6_clkevt_time_stop(); + meson6_clkevt_time_start(false); + return 0; +} + +static int meson6_set_periodic(struct clock_event_device *evt) +{ + meson6_clkevt_time_stop(); + meson6_clkevt_time_setup(USEC_PER_SEC / HZ - 1); + meson6_clkevt_time_start(true); + return 0; +} + +static int meson6_clkevt_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + meson6_clkevt_time_stop(); + meson6_clkevt_time_setup(evt); + meson6_clkevt_time_start(false); + + return 0; +} + +static struct clock_event_device meson6_clockevent = { + .name = "meson6_tick", + .rating = 400, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = meson6_shutdown, + .set_state_periodic = meson6_set_periodic, + .set_state_oneshot = meson6_set_oneshot, + .tick_resume = meson6_shutdown, + .set_next_event = meson6_clkevt_next_event, +}; + +static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int __init meson6_timer_init(struct device_node *node) +{ + u32 val; + int ret, irq; + + timer_base = of_io_request_and_map(node, 0, "meson6-timer"); + if (IS_ERR(timer_base)) { + pr_err("Can't map registers\n"); + return -ENXIO; + } + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + pr_err("Can't parse IRQ\n"); + return -EINVAL; + } + + /* Set 1us for timer E */ + val = readl(timer_base + MESON_ISA_TIMER_MUX); + val &= ~MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK; + val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK, + MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US); + writel(val, timer_base + MESON_ISA_TIMER_MUX); + + sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC); + clocksource_mmio_init(timer_base + MESON_ISA_TIMERE, node->name, + 1000 * 1000, 300, 32, clocksource_mmio_readl_up); + + /* Timer A base 1us */ + val &= ~MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK; + val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK, + MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US); + writel(val, timer_base + MESON_ISA_TIMER_MUX); + + /* Stop the timer A */ + meson6_clkevt_time_stop(); + + ret = request_irq(irq, meson6_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer", + &meson6_clockevent); + if (ret) { + pr_warn("failed to setup irq %d\n", irq); + return ret; + } + + meson6_clockevent.cpumask = cpu_possible_mask; + meson6_clockevent.irq = irq; + + clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC, + 1, 0xfffe); + +#ifdef CONFIG_ARM + /* Also use MESON_ISA_TIMERE for delays */ + register_current_timer_delay(&meson6_delay_timer); +#endif + + return 0; +} +TIMER_OF_DECLARE(meson6, "amlogic,meson6-timer", + meson6_timer_init); |
