drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 310 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-lpc32xx.c b/drivers/clocksource/timer-lpc32xx.c
new file mode 100644
index 000000000..68eae6378
--- /dev/null
+++ b/drivers/clocksource/timer-lpc32xx.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Clocksource driver for NXP LPC32xx/18xx/43xx timer
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on:
+ * time-efm32 Copyright (C) 2013 Pengutronix
+ * mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define LPC32XX_TIMER_IR		0x000
+#define  LPC32XX_TIMER_IR_MR0INT	BIT(0)
+#define LPC32XX_TIMER_TCR		0x004
+#define  LPC32XX_TIMER_TCR_CEN		BIT(0)
+#define  LPC32XX_TIMER_TCR_CRST		BIT(1)
+#define LPC32XX_TIMER_TC		0x008
+#define LPC32XX_TIMER_PR		0x00c
+#define LPC32XX_TIMER_MCR		0x014
+#define  LPC32XX_TIMER_MCR_MR0I		BIT(0)
+#define  LPC32XX_TIMER_MCR_MR0R		BIT(1)
+#define  LPC32XX_TIMER_MCR_MR0S		BIT(2)
+#define LPC32XX_TIMER_MR0		0x018
+#define LPC32XX_TIMER_CTCR		0x070
+
+struct lpc32xx_clock_event_ddata {
+	struct clock_event_device evtdev;
+	void __iomem *base;
+	u32 ticks_per_jiffy;
+};
+
+/* Needed for the sched clock */
+static void __iomem *clocksource_timer_counter;
+
+static u64 notrace lpc32xx_read_sched_clock(void)
+{
+	return readl(clocksource_timer_counter);
+}
+
+static unsigned long lpc32xx_delay_timer_read(void)
+{
+	return readl(clocksource_timer_counter);
+}
+
+static struct delay_timer lpc32xx_delay_timer = {
+	.read_current_timer = lpc32xx_delay_timer_read,
+};
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+				     struct clock_event_device *evtdev)
+{
+	struct lpc32xx_clock_event_ddata *ddata =
+		container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+	/*
+	 * Place timer in reset and program the delta in the match
+	 * channel 0 (MR0). When the timer counter matches the value
+	 * in MR0 register the match will trigger an interrupt.
+	 * After setup the timer is released from reset and enabled.
+	 */
+	writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
+	writel_relaxed(delta, ddata->base + LPC32XX_TIMER_MR0);
+	writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
+
+	return 0;
+}
+
+static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev)
+{
+	struct lpc32xx_clock_event_ddata *ddata =
+		container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+	/* Disable the timer */
+	writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
+
+	return 0;
+}
+
+static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev)
+{
+	struct lpc32xx_clock_event_ddata *ddata =
+		container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+	/*
+	 * When using oneshot, we must also disable the timer
+	 * to wait for the first call to set_next_event().
+	 */
+	writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
+
+	/* Enable interrupt, reset on match and stop on match (MCR). */
+	writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R |
+		       LPC32XX_TIMER_MCR_MR0S, ddata->base + LPC32XX_TIMER_MCR);
+	return 0;
+}
+
+static int lpc32xx_clkevt_periodic(struct clock_event_device *evtdev)
+{
+	struct lpc32xx_clock_event_ddata *ddata =
+		container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+	/* Enable interrupt and reset on match. */
+	writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R,
+		       ddata->base + LPC32XX_TIMER_MCR);
+
+	/*
+	 * Place timer in reset and program the delta in the match
+	 * channel 0 (MR0).
+	 */
+	writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
+	writel_relaxed(ddata->ticks_per_jiffy, ddata->base + LPC32XX_TIMER_MR0);
+	writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
+
+	return 0;
+}
+
+static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id)
+{
+	struct lpc32xx_clock_event_ddata *ddata = dev_id;
+
+	/* Clear match on channel 0 */
+	writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR);
+
+	ddata->evtdev.event_handler(&ddata->evtdev);
+
+	return IRQ_HANDLED;
+}
+
+static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = {
+	.evtdev = {
+		.name			= "lpc3220 clockevent",
+		.features		= CLOCK_EVT_FEAT_ONESHOT |
+					  CLOCK_EVT_FEAT_PERIODIC,
+		.rating			= 300,
+		.set_next_event		= lpc32xx_clkevt_next_event,
+		.set_state_shutdown	= lpc32xx_clkevt_shutdown,
+		.set_state_oneshot	= lpc32xx_clkevt_oneshot,
+		.set_state_periodic	= lpc32xx_clkevt_periodic,
+	},
+};
+
+static int __init lpc32xx_clocksource_init(struct device_node *np)
+{
+	void __iomem *base;
+	unsigned long rate;
+	struct clk *clk;
+	int ret;
+
+	clk = of_clk_get_by_name(np, "timerclk");
+	if (IS_ERR(clk)) {
+		pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("clock enable failed (%d)\n", ret);
+		goto err_clk_enable;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("unable to map registers\n");
+		ret = -EADDRNOTAVAIL;
+		goto err_iomap;
+	}
+
+	/*
+	 * Disable and reset timer then set it to free running timer
+	 * mode (CTCR) with no prescaler (PR) or match operations (MCR).
+	 * After setup the timer is released from reset and enabled.
+	 */
+	writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR);
+	writel_relaxed(0, base + LPC32XX_TIMER_PR);
+	writel_relaxed(0, base + LPC32XX_TIMER_MCR);
+	writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
+	writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR);
+
+	rate = clk_get_rate(clk);
+	ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer",
+				    rate, 300, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("failed to init clocksource (%d)\n", ret);
+		goto err_clocksource_init;
+	}
+
+	clocksource_timer_counter = base + LPC32XX_TIMER_TC;
+	lpc32xx_delay_timer.freq = rate;
+	register_current_timer_delay(&lpc32xx_delay_timer);
+	sched_clock_register(lpc32xx_read_sched_clock, 32, rate);
+
+	return 0;
+
+err_clocksource_init:
+	iounmap(base);
+err_iomap:
+	clk_disable_unprepare(clk);
+err_clk_enable:
+	clk_put(clk);
+	return ret;
+}
+
+static int __init lpc32xx_clockevent_init(struct device_node *np)
+{
+	void __iomem *base;
+	unsigned long rate;
+	struct clk *clk;
+	int ret, irq;
+
+	clk = of_clk_get_by_name(np, "timerclk");
+	if (IS_ERR(clk)) {
+		pr_err("clock get failed (%ld)\n", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("clock enable failed (%d)\n", ret);
+		goto err_clk_enable;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("unable to map registers\n");
+		ret = -EADDRNOTAVAIL;
+		goto err_iomap;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("get irq failed\n");
+		ret = -ENOENT;
+		goto err_irq;
+	}
+
+	/*
+	 * Disable timer and clear any pending interrupt (IR) on match
+	 * channel 0 (MR0). Clear the prescaler as it's not used.
+	 */
+	writel_relaxed(0, base + LPC32XX_TIMER_TCR);
+	writel_relaxed(0, base + LPC32XX_TIMER_PR);
+	writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
+	writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR);
+
+	rate = clk_get_rate(clk);
+	lpc32xx_clk_event_ddata.base = base;
+	lpc32xx_clk_event_ddata.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+	clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev,
+					rate, 1, -1);
+
+	ret = request_irq(irq, lpc32xx_clock_event_handler,
+			  IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent",
+			  &lpc32xx_clk_event_ddata);
+	if (ret) {
+		pr_err("request irq failed\n");
+		goto err_irq;
+	}
+
+	return 0;
+
+err_irq:
+	iounmap(base);
+err_iomap:
+	clk_disable_unprepare(clk);
+err_clk_enable:
+	clk_put(clk);
+	return ret;
+}
+
+/*
+ * This function asserts that we have exactly one clocksource and one
+ * clock_event_device in the end.
+ */
+static int __init lpc32xx_timer_init(struct device_node *np)
+{
+	static int has_clocksource, has_clockevent;
+	int ret = 0;
+
+	if (!has_clocksource) {
+		ret = lpc32xx_clocksource_init(np);
+		if (!ret) {
+			has_clocksource = 1;
+			return 0;
+		}
+	}
+
+	if (!has_clockevent) {
+		ret = lpc32xx_clockevent_init(np);
+		if (!ret) {
+			has_clockevent = 1;
+			return 0;
+		}
+	}
+
+	return ret;
+}
+TIMER_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);