diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-24 08:46:03 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-24 08:46:03 -0700 |
| commit | cf9610f9116d55c5a66ef9f1faecacabd93a9322 (patch) | |
| tree | 757a3d280760c654767631cab5ad8af2d86d1848 /drivers/clocksource/timer-keystone.c | |
| download | linux-stable-cf9610f9116d55c5a66ef9f1faecacabd93a9322.tar.gz linux-stable-cf9610f9116d55c5a66ef9f1faecacabd93a9322.zip | |
Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
Diffstat (limited to 'drivers/clocksource/timer-keystone.c')
| -rw-r--r-- | drivers/clocksource/timer-keystone.c | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c new file mode 100644 index 000000000..fea8a4f85 --- /dev/null +++ b/drivers/clocksource/timer-keystone.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Keystone broadcast clock-event + * + * Copyright 2013 Texas Instruments, Inc. + * + * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/interrupt.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#define TIMER_NAME "timer-keystone" + +/* Timer register offsets */ +#define TIM12 0x10 +#define TIM34 0x14 +#define PRD12 0x18 +#define PRD34 0x1c +#define TCR 0x20 +#define TGCR 0x24 +#define INTCTLSTAT 0x44 + +/* Timer register bitfields */ +#define TCR_ENAMODE_MASK 0xC0 +#define TCR_ENAMODE_ONESHOT_MASK 0x40 +#define TCR_ENAMODE_PERIODIC_MASK 0x80 + +#define TGCR_TIM_UNRESET_MASK 0x03 +#define INTCTLSTAT_ENINT_MASK 0x01 + +/** + * struct keystone_timer: holds timer's data + * @base: timer memory base address + * @hz_period: cycles per HZ period + * @event_dev: event device based on timer + */ +static struct keystone_timer { + void __iomem *base; + unsigned long hz_period; + struct clock_event_device event_dev; +} timer; + +static inline u32 keystone_timer_readl(unsigned long rg) +{ + return readl_relaxed(timer.base + rg); +} + +static inline void keystone_timer_writel(u32 val, unsigned long rg) +{ + writel_relaxed(val, timer.base + rg); +} + +/** + * keystone_timer_barrier: write memory barrier + * use explicit barrier to avoid using readl/writel non relaxed function + * variants, because in our case non relaxed variants hide the true places + * where barrier is needed. + */ +static inline void keystone_timer_barrier(void) +{ + __iowmb(); +} + +/** + * keystone_timer_config: configures timer to work in oneshot/periodic modes. + * @ mask: mask of the mode to configure + * @ period: cycles number to configure for + */ +static int keystone_timer_config(u64 period, int mask) +{ + u32 tcr; + u32 off; + + tcr = keystone_timer_readl(TCR); + off = tcr & ~(TCR_ENAMODE_MASK); + + /* set enable mode */ + tcr |= mask; + + /* disable timer */ + keystone_timer_writel(off, TCR); + /* here we have to be sure the timer has been disabled */ + keystone_timer_barrier(); + + /* reset counter to zero, set new period */ + keystone_timer_writel(0, TIM12); + keystone_timer_writel(0, TIM34); + keystone_timer_writel(period & 0xffffffff, PRD12); + keystone_timer_writel(period >> 32, PRD34); + + /* + * enable timer + * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers + * have been written. + */ + keystone_timer_barrier(); + keystone_timer_writel(tcr, TCR); + return 0; +} + +static void keystone_timer_disable(void) +{ + u32 tcr; + + tcr = keystone_timer_readl(TCR); + + /* disable timer */ + tcr &= ~(TCR_ENAMODE_MASK); + keystone_timer_writel(tcr, TCR); +} + +static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static int keystone_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + return keystone_timer_config(cycles, TCR_ENAMODE_ONESHOT_MASK); +} + +static int keystone_shutdown(struct clock_event_device *evt) +{ + keystone_timer_disable(); + return 0; +} + +static int keystone_set_periodic(struct clock_event_device *evt) +{ + keystone_timer_config(timer.hz_period, TCR_ENAMODE_PERIODIC_MASK); + return 0; +} + +static int __init keystone_timer_init(struct device_node *np) +{ + struct clock_event_device *event_dev = &timer.event_dev; + unsigned long rate; + struct clk *clk; + int irq, error; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + pr_err("%s: failed to map interrupts\n", __func__); + return -EINVAL; + } + + timer.base = of_iomap(np, 0); + if (!timer.base) { + pr_err("%s: failed to map registers\n", __func__); + return -ENXIO; + } + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + pr_err("%s: failed to get clock\n", __func__); + iounmap(timer.base); + return PTR_ERR(clk); + } + + error = clk_prepare_enable(clk); + if (error) { + pr_err("%s: failed to enable clock\n", __func__); + goto err; + } + + rate = clk_get_rate(clk); + + /* disable, use internal clock source */ + keystone_timer_writel(0, TCR); + /* here we have to be sure the timer has been disabled */ + keystone_timer_barrier(); + + /* reset timer as 64-bit, no pre-scaler, plus features are disabled */ + keystone_timer_writel(0, TGCR); + + /* unreset timer */ + keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR); + + /* init counter to zero */ + keystone_timer_writel(0, TIM12); + keystone_timer_writel(0, TIM34); + + timer.hz_period = DIV_ROUND_UP(rate, HZ); + + /* enable timer interrupts */ + keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT); + + error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER, + TIMER_NAME, event_dev); + if (error) { + pr_err("%s: failed to setup irq\n", __func__); + goto err; + } + + /* setup clockevent */ + event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + event_dev->set_next_event = keystone_set_next_event; + event_dev->set_state_shutdown = keystone_shutdown; + event_dev->set_state_periodic = keystone_set_periodic; + event_dev->set_state_oneshot = keystone_shutdown; + event_dev->cpumask = cpu_possible_mask; + event_dev->owner = THIS_MODULE; + event_dev->name = TIMER_NAME; + event_dev->irq = irq; + + clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX); + + pr_info("keystone timer clock @%lu Hz\n", rate); + return 0; +err: + clk_put(clk); + iounmap(timer.base); + return error; +} + +TIMER_OF_DECLARE(keystone_timer, "ti,keystone-timer", + keystone_timer_init); |
