diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-19 10:09:22 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-19 10:09:22 -0700 |
| commit | f4cdf7ca9a1fdcca413157df19753f388a5a224e (patch) | |
| tree | 60a31895b2446cd7fa27514e8c2843534a0de0da /drivers/clocksource/timer-imx-tpm.c | |
| download | linux-stable-f4cdf7ca9a1fdcca413157df19753f388a5a224e.tar.gz linux-stable-f4cdf7ca9a1fdcca413157df19753f388a5a224e.zip | |
Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core: added ISP statistics support and per-block validation
- v4l2-core: Allow unknown HDR10 white point and luminance
- New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor
- New codec: Milos: VPU v2.0 codec support
- isp driver: gained support for Dreamchip RPPX1 ISP framework
- vsp1 driver: gained support for RZ/T2H and RZ/N2H
- Novalake driver: gained CVS support for new NVL hardware
- dvb-core: fix feed leak on failed DMX_ADD_PID
- several driver fixes, cleanups and minor improvements
* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
media: ipu-bridge: check all DMI entries when overriding sensor rotation
media: v4l2-async: avoid deleting unlinked ASC entry on link error
media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
media: intel/ipu6: fix async notifier cleanup leak on parse error
media: staging/ipu7: fix async notifier UAF on probe error path
media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
media: rcar-isp: Fix VSPX reference leaks
media: rcar-isp: Release ISPCORE resources
media: i2c: imx415: Release runtime PM reference on VBLANK error
media: i2c: imx415: Return test pattern write errors
media: renesas: vsp1: Declare index variables in for loop statement
media: renesas: vsp1: Make reset control optional to support platforms without a reset line
media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
media: nxp: imx8-isi: Add additional 32-bit RGB format support
media: nxp: imx8-isi: Add 16-bit raw Bayer format support
media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
media: nxp: imx8-isi: Correct color map between V4L2 and ISI
...
Diffstat (limited to 'drivers/clocksource/timer-imx-tpm.c')
| -rw-r--r-- | drivers/clocksource/timer-imx-tpm.c | 244 |
1 files changed, 244 insertions, 0 deletions
diff --git a/drivers/clocksource/timer-imx-tpm.c b/drivers/clocksource/timer-imx-tpm.c new file mode 100644 index 000000000..92c025b70 --- /dev/null +++ b/drivers/clocksource/timer-imx-tpm.c @@ -0,0 +1,244 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2016 Freescale Semiconductor, Inc. +// Copyright 2017 NXP + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/sched_clock.h> + +#include "timer-of.h" + +#define TPM_PARAM 0x4 +#define TPM_PARAM_WIDTH_SHIFT 16 +#define TPM_PARAM_WIDTH_MASK (0xff << 16) +#define TPM_SC 0x10 +#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3) +#define TPM_SC_CMOD_DIV_DEFAULT 0x3 +#define TPM_SC_CMOD_DIV_MAX 0x7 +#define TPM_SC_TOF_MASK (0x1 << 7) +#define TPM_CNT 0x14 +#define TPM_MOD 0x18 +#define TPM_STATUS 0x1c +#define TPM_STATUS_CH0F BIT(0) +#define TPM_C0SC 0x20 +#define TPM_C0SC_CHIE BIT(6) +#define TPM_C0SC_MODE_SHIFT 2 +#define TPM_C0SC_MODE_MASK 0x3c +#define TPM_C0SC_MODE_SW_COMPARE 0x4 +#define TPM_C0SC_CHF_MASK (0x1 << 7) +#define TPM_C0V 0x24 + +static int counter_width __ro_after_init; +static void __iomem *timer_base __ro_after_init; + +static inline void tpm_timer_disable(void) +{ + unsigned int val; + + /* channel disable */ + val = readl(timer_base + TPM_C0SC); + val &= ~(TPM_C0SC_MODE_MASK | TPM_C0SC_CHIE); + writel(val, timer_base + TPM_C0SC); +} + +static inline void tpm_timer_enable(void) +{ + unsigned int val; + + /* channel enabled in sw compare mode */ + val = readl(timer_base + TPM_C0SC); + val |= (TPM_C0SC_MODE_SW_COMPARE << TPM_C0SC_MODE_SHIFT) | + TPM_C0SC_CHIE; + writel(val, timer_base + TPM_C0SC); +} + +static inline void tpm_irq_acknowledge(void) +{ + writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS); +} + +static inline unsigned long tpm_read_counter(void) +{ + return readl(timer_base + TPM_CNT); +} + +#if defined(CONFIG_ARM) +static struct delay_timer tpm_delay_timer; + +static unsigned long tpm_read_current_timer(void) +{ + return tpm_read_counter(); +} + +static u64 notrace tpm_read_sched_clock(void) +{ + return tpm_read_counter(); +} +#endif + +static int tpm_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long next, prev, now; + + prev = tpm_read_counter(); + next = prev + delta; + writel(next, timer_base + TPM_C0V); + now = tpm_read_counter(); + + /* + * Need to wait CNT increase at least 1 cycle to make sure + * the C0V has been updated into HW. + */ + if ((next & 0xffffffff) != readl(timer_base + TPM_C0V)) + while (now == tpm_read_counter()) + ; + + /* + * NOTE: We observed in a very small probability, the bus fabric + * contention between GPU and A7 may results a few cycles delay + * of writing CNT registers which may cause the min_delta event got + * missed, so we need add a ETIME check here in case it happened. + */ + return (now - prev) >= delta ? -ETIME : 0; +} + +static int tpm_set_state_oneshot(struct clock_event_device *evt) +{ + tpm_timer_enable(); + + return 0; +} + +static int tpm_set_state_shutdown(struct clock_event_device *evt) +{ + tpm_timer_disable(); + + return 0; +} + +static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + tpm_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct timer_of to_tpm = { + .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK, + .clkevt = { + .name = "i.MX TPM Timer", + .rating = 200, + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ, + .set_state_shutdown = tpm_set_state_shutdown, + .set_state_oneshot = tpm_set_state_oneshot, + .set_next_event = tpm_set_next_event, + .cpumask = cpu_possible_mask, + }, + .of_irq = { + .handler = tpm_timer_interrupt, + .flags = IRQF_TIMER, + }, + .of_clk = { + .name = "per", + }, +}; + +static int __init tpm_clocksource_init(void) +{ +#if defined(CONFIG_ARM) + tpm_delay_timer.read_current_timer = &tpm_read_current_timer; + tpm_delay_timer.freq = timer_of_rate(&to_tpm) >> 3; + register_current_timer_delay(&tpm_delay_timer); + + sched_clock_register(tpm_read_sched_clock, counter_width, + timer_of_rate(&to_tpm) >> 3); +#endif + + return clocksource_mmio_init(timer_base + TPM_CNT, + "imx-tpm", + timer_of_rate(&to_tpm) >> 3, + to_tpm.clkevt.rating, + counter_width, + clocksource_mmio_readl_up); +} + +static void __init tpm_clockevent_init(void) +{ + clockevents_config_and_register(&to_tpm.clkevt, + timer_of_rate(&to_tpm) >> 3, + 300, + GENMASK(counter_width - 1, + 1)); +} + +static int __init tpm_timer_init(struct device_node *np) +{ + struct clk *ipg; + int ret; + + ipg = of_clk_get_by_name(np, "ipg"); + if (IS_ERR(ipg)) { + pr_err("tpm: failed to get ipg clk\n"); + return -ENODEV; + } + /* enable clk before accessing registers */ + ret = clk_prepare_enable(ipg); + if (ret) { + pr_err("tpm: ipg clock enable failed (%d)\n", ret); + clk_put(ipg); + return ret; + } + + ret = timer_of_init(np, &to_tpm); + if (ret) + return ret; + + timer_base = timer_of_base(&to_tpm); + + counter_width = (readl(timer_base + TPM_PARAM) + & TPM_PARAM_WIDTH_MASK) >> TPM_PARAM_WIDTH_SHIFT; + /* use rating 200 for 32-bit counter and 150 for 16-bit counter */ + to_tpm.clkevt.rating = counter_width == 0x20 ? 200 : 150; + + /* + * Initialize tpm module to a known state + * 1) Counter disabled + * 2) TPM counter operates in up counting mode + * 3) Timer Overflow Interrupt disabled + * 4) Channel0 disabled + * 5) DMA transfers disabled + */ + /* make sure counter is disabled */ + writel(0, timer_base + TPM_SC); + /* TOF is W1C */ + writel(TPM_SC_TOF_MASK, timer_base + TPM_SC); + writel(0, timer_base + TPM_CNT); + /* CHF is W1C */ + writel(TPM_C0SC_CHF_MASK, timer_base + TPM_C0SC); + + /* + * increase per cnt, + * div 8 for 32-bit counter and div 128 for 16-bit counter + */ + writel(TPM_SC_CMOD_INC_PER_CNT | + (counter_width == 0x20 ? + TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX), + timer_base + TPM_SC); + + /* set MOD register to maximum for free running mode */ + writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD); + + tpm_clockevent_init(); + + return tpm_clocksource_init(); +} +TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init); |
