drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 215 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-gxp.c b/drivers/clocksource/timer-gxp.c
new file mode 100644
index 000000000..1becc9433
--- /dev/null
+++ b/drivers/clocksource/timer-gxp.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/sched_clock.h>
+
+#define TIMER0_FREQ	1000000
+#define GXP_TIMER_CNT_OFS 0x00
+#define GXP_TIMESTAMP_OFS 0x08
+#define GXP_TIMER_CTRL_OFS 0x14
+
+/* TCS Stands for Timer Control/Status: these are masks to be used in */
+/* the Timer Count Registers */
+#define MASK_TCS_ENABLE	0x01
+#define MASK_TCS_PERIOD	0x02
+#define MASK_TCS_RELOAD	0x04
+#define MASK_TCS_TC	0x80
+
+struct gxp_timer {
+	void __iomem *counter;
+	void __iomem *control;
+	struct clock_event_device evt;
+};
+
+static struct gxp_timer *gxp_timer;
+
+static void __iomem *system_clock __ro_after_init;
+
+static inline struct gxp_timer *to_gxp_timer(struct clock_event_device *evt_dev)
+{
+	return container_of(evt_dev, struct gxp_timer, evt);
+}
+
+static u64 notrace gxp_sched_read(void)
+{
+	return readl_relaxed(system_clock);
+}
+
+static int gxp_time_set_next_event(unsigned long event, struct clock_event_device *evt_dev)
+{
+	struct gxp_timer *timer = to_gxp_timer(evt_dev);
+
+	/* Stop counting and disable interrupt before updating */
+	writeb_relaxed(MASK_TCS_TC, timer->control);
+	writel_relaxed(event, timer->counter);
+	writeb_relaxed(MASK_TCS_TC | MASK_TCS_ENABLE, timer->control);
+
+	return 0;
+}
+
+static irqreturn_t gxp_timer_interrupt(int irq, void *dev_id)
+{
+	struct gxp_timer *timer = (struct gxp_timer *)dev_id;
+
+	if (!(readb_relaxed(timer->control) & MASK_TCS_TC))
+		return IRQ_NONE;
+
+	writeb_relaxed(MASK_TCS_TC, timer->control);
+
+	timer->evt.event_handler(&timer->evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init gxp_timer_init(struct device_node *node)
+{
+	void __iomem *base;
+	struct clk *clk;
+	u32 freq;
+	int ret, irq;
+
+	gxp_timer = kzalloc_obj(*gxp_timer);
+	if (!gxp_timer) {
+		ret = -ENOMEM;
+		pr_err("Can't allocate gxp_timer");
+		return ret;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		pr_err("%pOFn clock not found: %d\n", node, ret);
+		goto err_free;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("%pOFn clock enable failed: %d\n", node, ret);
+		goto err_clk_enable;
+	}
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		ret = -ENXIO;
+		pr_err("Can't map timer base registers");
+		goto err_iomap;
+	}
+
+	/* Set the offsets to the clock register and timer registers */
+	gxp_timer->counter = base + GXP_TIMER_CNT_OFS;
+	gxp_timer->control = base + GXP_TIMER_CTRL_OFS;
+	system_clock = base + GXP_TIMESTAMP_OFS;
+
+	gxp_timer->evt.name = node->name;
+	gxp_timer->evt.rating = 300;
+	gxp_timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
+	gxp_timer->evt.set_next_event = gxp_time_set_next_event;
+	gxp_timer->evt.cpumask = cpumask_of(0);
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq <= 0) {
+		ret = -EINVAL;
+		pr_err("GXP Timer Can't parse IRQ %d", irq);
+		goto err_exit;
+	}
+
+	freq = clk_get_rate(clk);
+
+	ret = clocksource_mmio_init(system_clock, node->name, freq,
+				    300, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("%pOFn init clocksource failed: %d", node, ret);
+		goto err_exit;
+	}
+
+	sched_clock_register(gxp_sched_read, 32, freq);
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq <= 0) {
+		ret = -EINVAL;
+		pr_err("%pOFn Can't parse IRQ %d", node, irq);
+		goto err_exit;
+	}
+
+	clockevents_config_and_register(&gxp_timer->evt, TIMER0_FREQ,
+					0xf, 0xffffffff);
+
+	ret = request_irq(irq, gxp_timer_interrupt, IRQF_TIMER | IRQF_SHARED,
+			  node->name, gxp_timer);
+	if (ret) {
+		pr_err("%pOFn request_irq() failed: %d", node, ret);
+		goto err_exit;
+	}
+
+	pr_debug("gxp: system timer (irq = %d)\n", irq);
+	return 0;
+
+err_exit:
+	iounmap(base);
+err_iomap:
+	clk_disable_unprepare(clk);
+err_clk_enable:
+	clk_put(clk);
+err_free:
+	kfree(gxp_timer);
+	return ret;
+}
+
+/*
+ * This probe gets called after the timer is already up and running. This will create
+ * the watchdog device as a child since the registers are shared.
+ */
+
+static int gxp_timer_probe(struct platform_device *pdev)
+{
+	struct platform_device *gxp_watchdog_device;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	if (!gxp_timer) {
+		pr_err("Gxp Timer not initialized, cannot create watchdog");
+		return -ENOMEM;
+	}
+
+	gxp_watchdog_device = platform_device_alloc("gxp-wdt", -1);
+	if (!gxp_watchdog_device) {
+		pr_err("Timer failed to allocate gxp-wdt");
+		return -ENOMEM;
+	}
+
+	/* Pass the base address (counter) as platform data and nothing else */
+	gxp_watchdog_device->dev.platform_data = gxp_timer->counter;
+	gxp_watchdog_device->dev.parent = dev;
+
+	ret = platform_device_add(gxp_watchdog_device);
+	if (ret)
+		platform_device_put(gxp_watchdog_device);
+
+	return ret;
+}
+
+static const struct of_device_id gxp_timer_of_match[] = {
+	{ .compatible = "hpe,gxp-timer", },
+	{},
+};
+
+static struct platform_driver gxp_timer_driver = {
+	.probe  = gxp_timer_probe,
+	.driver = {
+		.name = "gxp-timer",
+		.of_match_table = gxp_timer_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+builtin_platform_driver(gxp_timer_driver);
+
+TIMER_OF_DECLARE(gxp, "hpe,gxp-timer", gxp_timer_init);