Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 273 insertions, 0 deletions

diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
new file mode 100644
index 000000000..e52e12d27
--- /dev/null
+++ b/drivers/clocksource/mxs_timer.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+//  Copyright (C) 2000-2001 Deep Blue Solutions
+//  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+//  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+//  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+//  Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/stmp_device.h>
+#include <linux/sched_clock.h>
+
+/*
+ * There are 2 versions of the timrot on Freescale MXS-based SoCs.
+ * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
+ * extends the counter to 32 bits.
+ *
+ * The implementation uses two timers, one for clock_event and
+ * another for clocksource. MX28 uses timrot 0 and 1, while MX23
+ * uses 0 and 2.
+ */
+
+#define MX23_TIMROT_VERSION_OFFSET	0x0a0
+#define MX28_TIMROT_VERSION_OFFSET	0x120
+#define BP_TIMROT_MAJOR_VERSION		24
+#define BV_TIMROT_VERSION_1		0x01
+#define BV_TIMROT_VERSION_2		0x02
+#define timrot_is_v1()	(timrot_major_version == BV_TIMROT_VERSION_1)
+
+/*
+ * There are 4 registers for each timrotv2 instance, and 2 registers
+ * for each timrotv1. So address step 0x40 in macros below strides
+ * one instance of timrotv2 while two instances of timrotv1.
+ *
+ * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
+ * on MX28 while timrot2 on MX23.
+ */
+/* common between v1 and v2 */
+#define HW_TIMROT_ROTCTRL		0x00
+#define HW_TIMROT_TIMCTRLn(n)		(0x20 + (n) * 0x40)
+/* v1 only */
+#define HW_TIMROT_TIMCOUNTn(n)		(0x30 + (n) * 0x40)
+/* v2 only */
+#define HW_TIMROT_RUNNING_COUNTn(n)	(0x30 + (n) * 0x40)
+#define HW_TIMROT_FIXED_COUNTn(n)	(0x40 + (n) * 0x40)
+
+#define BM_TIMROT_TIMCTRLn_RELOAD	(1 << 6)
+#define BM_TIMROT_TIMCTRLn_UPDATE	(1 << 7)
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	(1 << 14)
+#define BM_TIMROT_TIMCTRLn_IRQ		(1 << 15)
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL		0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL		0xb
+#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS	0xf
+
+static struct clock_event_device mxs_clockevent_device;
+
+static void __iomem *mxs_timrot_base;
+static u32 timrot_major_version;
+
+static inline void timrot_irq_disable(void)
+{
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static inline void timrot_irq_enable(void)
+{
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
+}
+
+static void timrot_irq_acknowledge(void)
+{
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
+}
+
+static u64 timrotv1_get_cycles(struct clocksource *cs)
+{
+	return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
+			& 0xffff0000) >> 16);
+}
+
+static int timrotv1_set_next_event(unsigned long evt,
+					struct clock_event_device *dev)
+{
+	/* timrot decrements the count */
+	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
+
+	return 0;
+}
+
+static int timrotv2_set_next_event(unsigned long evt,
+					struct clock_event_device *dev)
+{
+	/* timrot decrements the count */
+	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
+
+	return 0;
+}
+
+static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	timrot_irq_acknowledge();
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void mxs_irq_clear(char *state)
+{
+	/* Disable interrupt in timer module */
+	timrot_irq_disable();
+
+	/* Set event time into the furthest future */
+	if (timrot_is_v1())
+		__raw_writel(0xffff, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+	else
+		__raw_writel(0xffffffff,
+			     mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+	/* Clear pending interrupt */
+	timrot_irq_acknowledge();
+	pr_debug("%s: changing mode to %s\n", __func__, state);
+}
+
+static int mxs_shutdown(struct clock_event_device *evt)
+{
+	mxs_irq_clear("shutdown");
+
+	return 0;
+}
+
+static int mxs_set_oneshot(struct clock_event_device *evt)
+{
+	if (clockevent_state_oneshot(evt))
+		mxs_irq_clear("oneshot");
+	timrot_irq_enable();
+	return 0;
+}
+
+static struct clock_event_device mxs_clockevent_device = {
+	.name			= "mxs_timrot",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.set_state_shutdown	= mxs_shutdown,
+	.set_state_oneshot	= mxs_set_oneshot,
+	.tick_resume		= mxs_shutdown,
+	.set_next_event		= timrotv2_set_next_event,
+	.rating			= 200,
+};
+
+static int __init mxs_clockevent_init(struct clk *timer_clk)
+{
+	if (timrot_is_v1())
+		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
+	mxs_clockevent_device.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&mxs_clockevent_device,
+					clk_get_rate(timer_clk),
+					timrot_is_v1() ? 0xf : 0x2,
+					timrot_is_v1() ? 0xfffe : 0xfffffffe);
+
+	return 0;
+}
+
+static struct clocksource clocksource_mxs = {
+	.name		= "mxs_timer",
+	.rating		= 200,
+	.read		= timrotv1_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static u64 notrace mxs_read_sched_clock_v2(void)
+{
+	return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
+static int __init mxs_clocksource_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	if (timrot_is_v1())
+		clocksource_register_hz(&clocksource_mxs, c);
+	else {
+		clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
+			"mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
+		sched_clock_register(mxs_read_sched_clock_v2, 32, c);
+	}
+
+	return 0;
+}
+
+static int __init mxs_timer_init(struct device_node *np)
+{
+	struct clk *timer_clk;
+	int irq, ret;
+
+	mxs_timrot_base = of_iomap(np, 0);
+	WARN_ON(!mxs_timrot_base);
+
+	timer_clk = of_clk_get(np, 0);
+	if (IS_ERR(timer_clk)) {
+		pr_err("%s: failed to get clk\n", __func__);
+		return PTR_ERR(timer_clk);
+	}
+
+	ret = clk_prepare_enable(timer_clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialize timers to a known state
+	 */
+	stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+
+	/* get timrot version */
+	timrot_major_version = __raw_readl(mxs_timrot_base +
+			(of_device_is_compatible(np, "fsl,imx23-timrot") ?
+						MX23_TIMROT_VERSION_OFFSET :
+						MX28_TIMROT_VERSION_OFFSET));
+	timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
+
+	/* one for clock_event */
+	__raw_writel((timrot_is_v1() ?
+			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+			BM_TIMROT_TIMCTRLn_UPDATE |
+			BM_TIMROT_TIMCTRLn_IRQ_EN,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+
+	/* another for clocksource */
+	__raw_writel((timrot_is_v1() ?
+			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
+			BM_TIMROT_TIMCTRLn_RELOAD,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
+
+	/* set clocksource timer fixed count to the maximum */
+	if (timrot_is_v1())
+		__raw_writel(0xffff,
+			mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+	else
+		__raw_writel(0xffffffff,
+			mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+	/* init and register the timer to the framework */
+	ret = mxs_clocksource_init(timer_clk);
+	if (ret)
+		return ret;
+
+	ret = mxs_clockevent_init(timer_clk);
+	if (ret)
+		return ret;
+
+	/* Make irqs happen */
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0)
+		return -EINVAL;
+
+	return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			   "MXS Timer Tick", &mxs_clockevent_device);
+}
+TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);