ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

1 files changed, 304 insertions, 0 deletions

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
new file mode 100644
index 000000000..1501c7db9
--- /dev/null
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
+
+#define pr_fmt(fmt) "mips-gic-timer: " fmt
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/of_irq.h>
+#include <linux/percpu.h>
+#include <linux/sched_clock.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+#include <asm/mips-cps.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, gic_clockevent_device);
+static int gic_timer_irq;
+static unsigned int gic_frequency;
+static unsigned int gic_count_width;
+static bool __read_mostly gic_clock_unstable;
+
+static void gic_clocksource_unstable(char *reason);
+
+static u64 notrace gic_read_count_2x32(void)
+{
+	unsigned int hi, hi2, lo;
+
+	do {
+		hi = read_gic_counter_32h();
+		lo = read_gic_counter_32l();
+		hi2 = read_gic_counter_32h();
+	} while (hi2 != hi);
+
+	return (((u64) hi) << 32) + lo;
+}
+
+static u64 notrace gic_read_count_64(void)
+{
+	return read_gic_counter();
+}
+
+static u64 notrace gic_read_count(void)
+{
+	if (mips_cm_is64)
+		return gic_read_count_64();
+
+	return gic_read_count_2x32();
+}
+
+static int gic_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+	int cpu = cpumask_first(evt->cpumask);
+	u64 cnt;
+	int res;
+
+	cnt = gic_read_count();
+	cnt += (u64)delta;
+	if (cpu == raw_smp_processor_id()) {
+		write_gic_vl_compare(cnt);
+	} else {
+		write_gic_vl_other(mips_cm_vp_id(cpu));
+		write_gic_vo_compare(cnt);
+	}
+	res = ((int)(gic_read_count() - cnt) >= 0) ? -ETIME : 0;
+	return res;
+}
+
+static irqreturn_t gic_compare_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = dev_id;
+
+	write_gic_vl_compare(read_gic_vl_compare());
+	cd->event_handler(cd);
+	return IRQ_HANDLED;
+}
+
+static void gic_clockevent_cpu_init(unsigned int cpu,
+				    struct clock_event_device *cd)
+{
+	cd->name		= "MIPS GIC";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_C3STOP;
+
+	cd->rating		= 350;
+	cd->irq			= gic_timer_irq;
+	cd->cpumask		= cpumask_of(cpu);
+	cd->set_next_event	= gic_next_event;
+
+	clockevents_config_and_register(cd, gic_frequency, 0x300, 0x7fffffff);
+
+	enable_percpu_irq(gic_timer_irq, IRQ_TYPE_NONE);
+}
+
+static void gic_clockevent_cpu_exit(struct clock_event_device *cd)
+{
+	disable_percpu_irq(gic_timer_irq);
+}
+
+static void gic_update_frequency(void *data)
+{
+	unsigned long rate = (unsigned long)data;
+
+	clockevents_update_freq(this_cpu_ptr(&gic_clockevent_device), rate);
+}
+
+static int gic_starting_cpu(unsigned int cpu)
+{
+	/* Ensure the GIC counter is running */
+	clear_gic_config(GIC_CONFIG_COUNTSTOP);
+
+	gic_clockevent_cpu_init(cpu, this_cpu_ptr(&gic_clockevent_device));
+	return 0;
+}
+
+static int gic_clk_notifier(struct notifier_block *nb, unsigned long action,
+			    void *data)
+{
+	struct clk_notifier_data *cnd = data;
+
+	if (action == POST_RATE_CHANGE) {
+		gic_clocksource_unstable("ref clock rate change");
+		on_each_cpu(gic_update_frequency, (void *)cnd->new_rate, 1);
+	}
+
+	return NOTIFY_OK;
+}
+
+static int gic_dying_cpu(unsigned int cpu)
+{
+	gic_clockevent_cpu_exit(this_cpu_ptr(&gic_clockevent_device));
+	return 0;
+}
+
+static struct notifier_block gic_clk_nb = {
+	.notifier_call = gic_clk_notifier,
+};
+
+static int gic_clockevent_init(void)
+{
+	int ret;
+
+	if (!gic_frequency)
+		return -ENXIO;
+
+	ret = request_percpu_irq(gic_timer_irq, gic_compare_interrupt,
+				 "timer", &gic_clockevent_device);
+	if (ret < 0) {
+		pr_err("IRQ %d setup failed (%d)\n", gic_timer_irq, ret);
+		return ret;
+	}
+
+	cpuhp_setup_state(CPUHP_AP_MIPS_GIC_TIMER_STARTING,
+			  "clockevents/mips/gic/timer:starting",
+			  gic_starting_cpu, gic_dying_cpu);
+	return 0;
+}
+
+static u64 gic_hpt_read(struct clocksource *cs)
+{
+	return gic_read_count();
+}
+
+static u64 gic_hpt_read_multicluster(struct clocksource *cs)
+{
+	unsigned int hi, hi2, lo;
+	u64 count;
+
+	mips_cm_lock_other(0, 0, 0, CM_GCR_Cx_OTHER_BLOCK_GLOBAL);
+
+	if (mips_cm_is64) {
+		count = read_gic_redir_counter();
+		goto out;
+	}
+
+	hi = read_gic_redir_counter_32h();
+	while (true) {
+		lo = read_gic_redir_counter_32l();
+
+		/* If hi didn't change then lo didn't wrap & we're done */
+		hi2 = read_gic_redir_counter_32h();
+		if (hi2 == hi)
+			break;
+
+		/* Otherwise, repeat with the latest hi value */
+		hi = hi2;
+	}
+
+	count = (((u64)hi) << 32) + lo;
+out:
+	mips_cm_unlock_other();
+	return count;
+}
+
+static struct clocksource gic_clocksource = {
+	.name			= "GIC",
+	.read			= gic_hpt_read,
+	.flags			= CLOCK_SOURCE_IS_CONTINUOUS,
+	.vdso_clock_mode	= VDSO_CLOCKMODE_GIC,
+};
+
+static void gic_clocksource_unstable(char *reason)
+{
+	if (gic_clock_unstable)
+		return;
+
+	gic_clock_unstable = true;
+
+	pr_info("GIC timer is unstable due to %s\n", reason);
+
+	clocksource_mark_unstable(&gic_clocksource);
+}
+
+static int __init __gic_clocksource_init(void)
+{
+	int ret;
+
+	/* Set clocksource mask. */
+	gic_count_width = read_gic_config() & GIC_CONFIG_COUNTBITS;
+	gic_count_width >>= __ffs(GIC_CONFIG_COUNTBITS);
+	gic_count_width *= 4;
+	gic_count_width += 32;
+	gic_clocksource.mask = CLOCKSOURCE_MASK(gic_count_width);
+
+	/* Calculate a somewhat reasonable rating value. */
+	if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ))
+		gic_clocksource.rating = 300; /* Good when frequecy is stable */
+	else
+		gic_clocksource.rating = 200;
+	gic_clocksource.rating += clamp(gic_frequency / 10000000, 0, 99);
+
+	if (mips_cps_multicluster_cpus()) {
+		gic_clocksource.read = &gic_hpt_read_multicluster;
+		gic_clocksource.vdso_clock_mode = VDSO_CLOCKMODE_NONE;
+	}
+
+	ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
+	if (ret < 0)
+		pr_warn("Unable to register clocksource\n");
+
+	return ret;
+}
+
+static int __init gic_clocksource_of_init(struct device_node *node)
+{
+	struct clk *clk;
+	int ret;
+
+	if (!mips_gic_present() || !node->parent ||
+	    !of_device_is_compatible(node->parent, "mti,gic")) {
+		pr_warn("No DT definition\n");
+		return -ENXIO;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (!IS_ERR(clk)) {
+		ret = clk_prepare_enable(clk);
+		if (ret < 0) {
+			pr_err("Failed to enable clock\n");
+			clk_put(clk);
+			return ret;
+		}
+
+		gic_frequency = clk_get_rate(clk);
+	} else if (of_property_read_u32(node, "clock-frequency",
+					&gic_frequency)) {
+		pr_err("Frequency not specified\n");
+		return -EINVAL;
+	}
+	gic_timer_irq = irq_of_parse_and_map(node, 0);
+	if (!gic_timer_irq) {
+		pr_err("IRQ not specified\n");
+		return -EINVAL;
+	}
+
+	ret = __gic_clocksource_init();
+	if (ret)
+		return ret;
+
+	ret = gic_clockevent_init();
+	if (!ret && !IS_ERR(clk)) {
+		if (clk_notifier_register(clk, &gic_clk_nb) < 0)
+			pr_warn("Unable to register clock notifier\n");
+	}
+
+	/*
+	 * It's safe to use the MIPS GIC timer as a sched clock source only if
+	 * its ticks are stable, which is true on either the platforms with
+	 * stable CPU frequency or on the platforms with CM3 and CPU frequency
+	 * change performed by the CPC core clocks divider.
+	 */
+	if ((mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ)) &&
+	     !mips_cps_multicluster_cpus()) {
+		sched_clock_register(mips_cm_is64 ?
+				     gic_read_count_64 : gic_read_count_2x32,
+				     gic_count_width, gic_frequency);
+	}
+
+	return 0;
+}
+TIMER_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+		       gic_clocksource_of_init);