staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()grafted

rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:

	const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
	...
	c = frame_body[0];
	...
	a = frame_body[1];

frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.

This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.

Add the missing length check before frame_body is dereferenced.

Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://patch.msgid.link/20260728125456.32359-3-meatuni001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 110 insertions, 0 deletions

diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
new file mode 100644
index 000000000..63ae3a691
--- /dev/null
+++ b/drivers/clocksource/clps711x-timer.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Cirrus Logic CLPS711X clocksource driver
+ *
+ *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+enum {
+	CLPS711X_CLKSRC_CLOCKSOURCE,
+	CLPS711X_CLKSRC_CLOCKEVENT,
+};
+
+static void __iomem *tcd;
+
+static u64 notrace clps711x_sched_clock_read(void)
+{
+	return ~readw(tcd);
+}
+
+static void __init clps711x_clksrc_init(struct clk *clock, void __iomem *base)
+{
+	unsigned long rate = clk_get_rate(clock);
+
+	tcd = base;
+
+	clocksource_mmio_init(tcd, "clps711x-clocksource", rate, 300, 16,
+			      clocksource_mmio_readw_down);
+
+	sched_clock_register(clps711x_sched_clock_read, 16, rate);
+}
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
+					unsigned int irq)
+{
+	struct clock_event_device *clkevt;
+	unsigned long rate;
+
+	clkevt = kzalloc_obj(*clkevt);
+	if (!clkevt)
+		return -ENOMEM;
+
+	rate = clk_get_rate(clock);
+
+	/* Set Timer prescaler */
+	writew(DIV_ROUND_CLOSEST(rate, HZ), base);
+
+	clkevt->name = "clps711x-clockevent";
+	clkevt->rating = 300;
+	clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
+	clkevt->cpumask = cpumask_of(0);
+	clockevents_config_and_register(clkevt, HZ, 0, 0);
+
+	return request_irq(irq, clps711x_timer_interrupt, IRQF_TIMER,
+			   "clps711x-timer", clkevt);
+}
+
+static int __init clps711x_timer_init(struct device_node *np)
+{
+	unsigned int irq = irq_of_parse_and_map(np, 0);
+	struct clk *clock = of_clk_get(np, 0);
+	void __iomem *base = of_iomap(np, 0);
+	int ret = 0;
+
+	if (!base)
+		return -ENOMEM;
+	if (!irq) {
+		ret = -EINVAL;
+		goto unmap_io;
+	}
+	if (IS_ERR(clock)) {
+		ret = PTR_ERR(clock);
+		goto unmap_io;
+	}
+
+	switch (of_alias_get_id(np, "timer")) {
+	case CLPS711X_CLKSRC_CLOCKSOURCE:
+		clps711x_clksrc_init(clock, base);
+		return 0;
+	case CLPS711X_CLKSRC_CLOCKEVENT:
+		ret =  _clps711x_clkevt_init(clock, base, irq);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+unmap_io:
+	iounmap(base);
+	return ret;
+}
+TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);