Merge tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linuxgrafted

Pull io_uring fixes from Jens Axboe:

 - Fix a task_work add use-after-free with SQPOLL.

   The sqpoll thread could pop and complete the last request while
   io_req_normal_work_add() was still looking at them after the mpscq
   push.

   Use the same approach as DEFER_TASKRUN to protect from that, holding
   an RCU read lock across the add, and have exit wait for an RCU grace
   period for SQPOLL rings as well.

 - CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
   big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
   rings

 - Mark the source filter table as COW when cloning bpf filters, so
   registering another filter on the source doesn't modify the shared
   table in place

 - Initialize the task context before running the BPF loop

 - Requeue zcrx multishot receives stopped by a local resource

 - End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)

* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  io_uring: fix task_work add use-after-free with SQPOLL
  io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
  io_uring/zcrx: requeue multishot receives stopped by a local resource
  io_uring: initialize task context before running the BPF loop
  io_uring: zero big_cqe for aux CQEs on CQE32 rings
  io_uring: fix free entry check for 32b CQEs on CQE32 rings
  io_uring: only post the dummy skip CQE on CQE_MIXED rings
  io_uring/bpf_filter: mark source as COW when cloning filters

1 files changed, 110 insertions, 0 deletions

diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
new file mode 100644
index 000000000..63ae3a691
--- /dev/null
+++ b/drivers/clocksource/clps711x-timer.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Cirrus Logic CLPS711X clocksource driver
+ *
+ *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+enum {
+	CLPS711X_CLKSRC_CLOCKSOURCE,
+	CLPS711X_CLKSRC_CLOCKEVENT,
+};
+
+static void __iomem *tcd;
+
+static u64 notrace clps711x_sched_clock_read(void)
+{
+	return ~readw(tcd);
+}
+
+static void __init clps711x_clksrc_init(struct clk *clock, void __iomem *base)
+{
+	unsigned long rate = clk_get_rate(clock);
+
+	tcd = base;
+
+	clocksource_mmio_init(tcd, "clps711x-clocksource", rate, 300, 16,
+			      clocksource_mmio_readw_down);
+
+	sched_clock_register(clps711x_sched_clock_read, 16, rate);
+}
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
+					unsigned int irq)
+{
+	struct clock_event_device *clkevt;
+	unsigned long rate;
+
+	clkevt = kzalloc_obj(*clkevt);
+	if (!clkevt)
+		return -ENOMEM;
+
+	rate = clk_get_rate(clock);
+
+	/* Set Timer prescaler */
+	writew(DIV_ROUND_CLOSEST(rate, HZ), base);
+
+	clkevt->name = "clps711x-clockevent";
+	clkevt->rating = 300;
+	clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
+	clkevt->cpumask = cpumask_of(0);
+	clockevents_config_and_register(clkevt, HZ, 0, 0);
+
+	return request_irq(irq, clps711x_timer_interrupt, IRQF_TIMER,
+			   "clps711x-timer", clkevt);
+}
+
+static int __init clps711x_timer_init(struct device_node *np)
+{
+	unsigned int irq = irq_of_parse_and_map(np, 0);
+	struct clk *clock = of_clk_get(np, 0);
+	void __iomem *base = of_iomap(np, 0);
+	int ret = 0;
+
+	if (!base)
+		return -ENOMEM;
+	if (!irq) {
+		ret = -EINVAL;
+		goto unmap_io;
+	}
+	if (IS_ERR(clock)) {
+		ret = PTR_ERR(clock);
+		goto unmap_io;
+	}
+
+	switch (of_alias_get_id(np, "timer")) {
+	case CLPS711X_CLKSRC_CLOCKSOURCE:
+		clps711x_clksrc_init(clock, base);
+		return 0;
+	case CLPS711X_CLKSRC_CLOCKEVENT:
+		ret =  _clps711x_clkevt_init(clock, base, irq);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+unmap_io:
+	iounmap(base);
+	return ret;
+}
+TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);