drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 110 insertions, 0 deletions

diff --git a/drivers/clocksource/clps711x-timer.c b/drivers/clocksource/clps711x-timer.c
new file mode 100644
index 000000000..63ae3a691
--- /dev/null
+++ b/drivers/clocksource/clps711x-timer.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Cirrus Logic CLPS711X clocksource driver
+ *
+ *  Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+enum {
+	CLPS711X_CLKSRC_CLOCKSOURCE,
+	CLPS711X_CLKSRC_CLOCKEVENT,
+};
+
+static void __iomem *tcd;
+
+static u64 notrace clps711x_sched_clock_read(void)
+{
+	return ~readw(tcd);
+}
+
+static void __init clps711x_clksrc_init(struct clk *clock, void __iomem *base)
+{
+	unsigned long rate = clk_get_rate(clock);
+
+	tcd = base;
+
+	clocksource_mmio_init(tcd, "clps711x-clocksource", rate, 300, 16,
+			      clocksource_mmio_readw_down);
+
+	sched_clock_register(clps711x_sched_clock_read, 16, rate);
+}
+
+static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init _clps711x_clkevt_init(struct clk *clock, void __iomem *base,
+					unsigned int irq)
+{
+	struct clock_event_device *clkevt;
+	unsigned long rate;
+
+	clkevt = kzalloc_obj(*clkevt);
+	if (!clkevt)
+		return -ENOMEM;
+
+	rate = clk_get_rate(clock);
+
+	/* Set Timer prescaler */
+	writew(DIV_ROUND_CLOSEST(rate, HZ), base);
+
+	clkevt->name = "clps711x-clockevent";
+	clkevt->rating = 300;
+	clkevt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_C3STOP;
+	clkevt->cpumask = cpumask_of(0);
+	clockevents_config_and_register(clkevt, HZ, 0, 0);
+
+	return request_irq(irq, clps711x_timer_interrupt, IRQF_TIMER,
+			   "clps711x-timer", clkevt);
+}
+
+static int __init clps711x_timer_init(struct device_node *np)
+{
+	unsigned int irq = irq_of_parse_and_map(np, 0);
+	struct clk *clock = of_clk_get(np, 0);
+	void __iomem *base = of_iomap(np, 0);
+	int ret = 0;
+
+	if (!base)
+		return -ENOMEM;
+	if (!irq) {
+		ret = -EINVAL;
+		goto unmap_io;
+	}
+	if (IS_ERR(clock)) {
+		ret = PTR_ERR(clock);
+		goto unmap_io;
+	}
+
+	switch (of_alias_get_id(np, "timer")) {
+	case CLPS711X_CLKSRC_CLOCKSOURCE:
+		clps711x_clksrc_init(clock, base);
+		return 0;
+	case CLPS711X_CLKSRC_CLOCKEVENT:
+		ret =  _clps711x_clkevt_init(clock, base, irq);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+unmap_io:
+	iounmap(base);
+	return ret;
+}
+TIMER_OF_DECLARE(clps711x, "cirrus,ep7209-timer", clps711x_timer_init);