ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

12 files changed, 1257 insertions, 0 deletions

diff --git a/drivers/clk/uniphier/Kconfig b/drivers/clk/uniphier/Kconfig
new file mode 100644
index 000000000..af37b2184
--- /dev/null
+++ b/drivers/clk/uniphier/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config CLK_UNIPHIER
+	bool "Clock driver for UniPhier SoCs"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	default ARCH_UNIPHIER
+	help
+	  Support for clock controllers on UniPhier SoCs.
+	  Say Y if you want to control clocks provided by System Control
+	  block, Media I/O block, Peripheral Block.
diff --git a/drivers/clk/uniphier/Makefile b/drivers/clk/uniphier/Makefile
new file mode 100644
index 000000000..e5715abef
--- /dev/null
+++ b/drivers/clk/uniphier/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y	+= clk-uniphier-core.o
+
+obj-y	+= clk-uniphier-cpugear.o
+obj-y	+= clk-uniphier-fixed-factor.o
+obj-y	+= clk-uniphier-fixed-rate.o
+obj-y	+= clk-uniphier-gate.o
+obj-y	+= clk-uniphier-mux.o
+
+obj-y	+= clk-uniphier-sys.o
+obj-y	+= clk-uniphier-mio.o
+obj-y	+= clk-uniphier-peri.o
diff --git a/drivers/clk/uniphier/clk-uniphier-core.c b/drivers/clk/uniphier/clk-uniphier-core.c
new file mode 100644
index 000000000..37b495e68
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-core.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "clk-uniphier.h"
+
+static struct clk_hw *uniphier_clk_register(struct device *dev,
+					    struct regmap *regmap,
+					const struct uniphier_clk_data *data)
+{
+	switch (data->type) {
+	case UNIPHIER_CLK_TYPE_CPUGEAR:
+		return uniphier_clk_register_cpugear(dev, regmap, data->name,
+						     &data->data.cpugear);
+	case UNIPHIER_CLK_TYPE_FIXED_FACTOR:
+		return uniphier_clk_register_fixed_factor(dev, data->name,
+							  &data->data.factor);
+	case UNIPHIER_CLK_TYPE_FIXED_RATE:
+		return uniphier_clk_register_fixed_rate(dev, data->name,
+							&data->data.rate);
+	case UNIPHIER_CLK_TYPE_GATE:
+		return uniphier_clk_register_gate(dev, regmap, data->name,
+						  &data->data.gate);
+	case UNIPHIER_CLK_TYPE_MUX:
+		return uniphier_clk_register_mux(dev, regmap, data->name,
+						 &data->data.mux);
+	default:
+		dev_err(dev, "unsupported clock type\n");
+		return ERR_PTR(-EINVAL);
+	}
+}
+
+static int uniphier_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *hw_data;
+	const struct uniphier_clk_data *p, *data;
+	struct regmap *regmap;
+	struct device_node *parent;
+	int clk_num = 0;
+
+	data = of_device_get_match_data(dev);
+	if (WARN_ON(!data))
+		return -EINVAL;
+
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to get regmap (error %ld)\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	for (p = data; p->name; p++)
+		clk_num = max(clk_num, p->idx + 1);
+
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, clk_num),
+			GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	hw_data->num = clk_num;
+
+	/* avoid returning NULL for unused idx */
+	while (--clk_num >= 0)
+		hw_data->hws[clk_num] = ERR_PTR(-EINVAL);
+
+	for (p = data; p->name; p++) {
+		struct clk_hw *hw;
+
+		dev_dbg(dev, "register %s (index=%d)\n", p->name, p->idx);
+		hw = uniphier_clk_register(dev, regmap, p);
+		if (WARN(IS_ERR(hw), "failed to register %s", p->name))
+			continue;
+
+		if (p->idx >= 0)
+			hw_data->hws[p->idx] = hw;
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   hw_data);
+}
+
+static const struct of_device_id uniphier_clk_match[] = {
+	/* System clock */
+	{
+		.compatible = "socionext,uniphier-ld4-clock",
+		.data = uniphier_ld4_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-clock",
+		.data = uniphier_pro4_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-clock",
+		.data = uniphier_sld8_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-clock",
+		.data = uniphier_pro5_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-clock",
+		.data = uniphier_pxs2_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-clock",
+		.data = uniphier_ld11_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-clock",
+		.data = uniphier_ld20_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-clock",
+		.data = uniphier_pxs3_sys_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-clock",
+		.data = uniphier_nx1_sys_clk_data,
+	},
+	/* Media I/O clock, SD clock */
+	{
+		.compatible = "socionext,uniphier-ld4-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-mio-clock",
+		.data = uniphier_ld4_mio_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-sd-clock",
+		.data = uniphier_pro5_sd_clk_data,
+	},
+	/* Peripheral clock */
+	{
+		.compatible = "socionext,uniphier-ld4-peri-clock",
+		.data = uniphier_ld4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro4-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-sld8-peri-clock",
+		.data = uniphier_ld4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs2-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld11-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-ld20-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-pxs3-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	{
+		.compatible = "socionext,uniphier-nx1-peri-clock",
+		.data = uniphier_pro4_peri_clk_data,
+	},
+	/* SoC-glue clock */
+	{
+		.compatible = "socionext,uniphier-pro4-sg-clock",
+		.data = uniphier_pro4_sg_clk_data,
+	},
+	{ /* sentinel */ }
+};
+
+static struct platform_driver uniphier_clk_driver = {
+	.probe = uniphier_clk_probe,
+	.driver = {
+		.name = "uniphier-clk",
+		.of_match_table = uniphier_clk_match,
+	},
+};
+builtin_platform_driver(uniphier_clk_driver);
diff --git a/drivers/clk/uniphier/clk-uniphier-cpugear.c b/drivers/clk/uniphier/clk-uniphier-cpugear.c
new file mode 100644
index 000000000..a2f01a4da
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-cpugear.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_CLK_CPUGEAR_STAT	0	/* status */
+#define UNIPHIER_CLK_CPUGEAR_SET	4	/* set */
+#define UNIPHIER_CLK_CPUGEAR_UPD	8	/* update */
+#define   UNIPHIER_CLK_CPUGEAR_UPD_BIT	BIT(0)
+
+struct uniphier_clk_cpugear {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	unsigned int regbase;
+	unsigned int mask;
+};
+
+#define to_uniphier_clk_cpugear(_hw) \
+			container_of(_hw, struct uniphier_clk_cpugear, hw)
+
+static int uniphier_clk_cpugear_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct uniphier_clk_cpugear *gear = to_uniphier_clk_cpugear(hw);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_write_bits(gear->regmap,
+				gear->regbase + UNIPHIER_CLK_CPUGEAR_SET,
+				gear->mask, index);
+	if (ret)
+		return ret;
+
+	ret = regmap_write_bits(gear->regmap,
+				gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
+				UNIPHIER_CLK_CPUGEAR_UPD_BIT,
+				UNIPHIER_CLK_CPUGEAR_UPD_BIT);
+	if (ret)
+		return ret;
+
+	return regmap_read_poll_timeout(gear->regmap,
+				gear->regbase + UNIPHIER_CLK_CPUGEAR_UPD,
+				val, !(val & UNIPHIER_CLK_CPUGEAR_UPD_BIT),
+				0, 1);
+}
+
+static u8 uniphier_clk_cpugear_get_parent(struct clk_hw *hw)
+{
+	struct uniphier_clk_cpugear *gear = to_uniphier_clk_cpugear(hw);
+	int num_parents = clk_hw_get_num_parents(hw);
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(gear->regmap,
+			  gear->regbase + UNIPHIER_CLK_CPUGEAR_STAT, &val);
+	if (ret)
+		return ret;
+
+	val &= gear->mask;
+
+	return val < num_parents ? val : -EINVAL;
+}
+
+static const struct clk_ops uniphier_clk_cpugear_ops = {
+	.determine_rate = __clk_mux_determine_rate,
+	.set_parent = uniphier_clk_cpugear_set_parent,
+	.get_parent = uniphier_clk_cpugear_get_parent,
+};
+
+struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
+					 struct regmap *regmap,
+					 const char *name,
+				const struct uniphier_clk_cpugear_data *data)
+{
+	struct uniphier_clk_cpugear *gear;
+	struct clk_init_data init;
+	int ret;
+
+	gear = devm_kzalloc(dev, sizeof(*gear), GFP_KERNEL);
+	if (!gear)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &uniphier_clk_cpugear_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = data->parent_names;
+	init.num_parents = data->num_parents;
+
+	gear->regmap = regmap;
+	gear->regbase = data->regbase;
+	gear->mask = data->mask;
+	gear->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &gear->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &gear->hw;
+}
diff --git a/drivers/clk/uniphier/clk-uniphier-fixed-factor.c b/drivers/clk/uniphier/clk-uniphier-fixed-factor.c
new file mode 100644
index 000000000..a6a37a6bc
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-fixed-factor.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+
+#include "clk-uniphier.h"
+
+struct clk_hw *uniphier_clk_register_fixed_factor(struct device *dev,
+						  const char *name,
+			const struct uniphier_clk_fixed_factor_data *data)
+{
+	struct clk_fixed_factor *fix;
+	struct clk_init_data init;
+	int ret;
+
+	fix = devm_kzalloc(dev, sizeof(*fix), GFP_KERNEL);
+	if (!fix)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixed_factor_ops;
+	init.flags = data->parent_name ? CLK_SET_RATE_PARENT : 0;
+	init.parent_names = data->parent_name ? &data->parent_name : NULL;
+	init.num_parents = data->parent_name ? 1 : 0;
+
+	fix->mult = data->mult;
+	fix->div = data->div;
+	fix->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &fix->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &fix->hw;
+}
diff --git a/drivers/clk/uniphier/clk-uniphier-fixed-rate.c b/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
new file mode 100644
index 000000000..3bc55ab75
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-fixed-rate.c
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+
+#include "clk-uniphier.h"
+
+struct clk_hw *uniphier_clk_register_fixed_rate(struct device *dev,
+						const char *name,
+				const struct uniphier_clk_fixed_rate_data *data)
+{
+	struct clk_fixed_rate *fixed;
+	struct clk_init_data init;
+	int ret;
+
+	/* allocate fixed-rate clock */
+	fixed = devm_kzalloc(dev, sizeof(*fixed), GFP_KERNEL);
+	if (!fixed)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixed_rate_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+
+	fixed->fixed_rate = data->fixed_rate;
+	fixed->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &fixed->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &fixed->hw;
+}
diff --git a/drivers/clk/uniphier/clk-uniphier-gate.c b/drivers/clk/uniphier/clk-uniphier-gate.c
new file mode 100644
index 000000000..e58093e79
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-gate.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+struct uniphier_clk_gate {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	unsigned int reg;
+	unsigned int bit;
+};
+
+#define to_uniphier_clk_gate(_hw) \
+				container_of(_hw, struct uniphier_clk_gate, hw)
+
+static int uniphier_clk_gate_endisable(struct clk_hw *hw, int enable)
+{
+	struct uniphier_clk_gate *gate = to_uniphier_clk_gate(hw);
+
+	return regmap_write_bits(gate->regmap, gate->reg, BIT(gate->bit),
+				 enable ? BIT(gate->bit) : 0);
+}
+
+static int uniphier_clk_gate_enable(struct clk_hw *hw)
+{
+	return uniphier_clk_gate_endisable(hw, 1);
+}
+
+static void uniphier_clk_gate_disable(struct clk_hw *hw)
+{
+	if (uniphier_clk_gate_endisable(hw, 0) < 0)
+		pr_warn("failed to disable clk\n");
+}
+
+static int uniphier_clk_gate_is_enabled(struct clk_hw *hw)
+{
+	struct uniphier_clk_gate *gate = to_uniphier_clk_gate(hw);
+	unsigned int val;
+
+	if (regmap_read(gate->regmap, gate->reg, &val) < 0)
+		pr_warn("is_enabled() may return wrong result\n");
+
+	return !!(val & BIT(gate->bit));
+}
+
+static const struct clk_ops uniphier_clk_gate_ops = {
+	.enable = uniphier_clk_gate_enable,
+	.disable = uniphier_clk_gate_disable,
+	.is_enabled = uniphier_clk_gate_is_enabled,
+};
+
+struct clk_hw *uniphier_clk_register_gate(struct device *dev,
+					  struct regmap *regmap,
+					  const char *name,
+				const struct uniphier_clk_gate_data *data)
+{
+	struct uniphier_clk_gate *gate;
+	struct clk_init_data init;
+	int ret;
+
+	gate = devm_kzalloc(dev, sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &uniphier_clk_gate_ops;
+	init.flags = data->parent_name ? CLK_SET_RATE_PARENT : 0;
+	init.parent_names = data->parent_name ? &data->parent_name : NULL;
+	init.num_parents = data->parent_name ? 1 : 0;
+
+	gate->regmap = regmap;
+	gate->reg = data->reg;
+	gate->bit = data->bit;
+	gate->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &gate->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &gate->hw;
+}
diff --git a/drivers/clk/uniphier/clk-uniphier-mio.c b/drivers/clk/uniphier/clk-uniphier-mio.c
new file mode 100644
index 000000000..2cbbf67c9
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-mio.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/stddef.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_MIO_CLK_SD_FIXED					\
+	UNIPHIER_CLK_FACTOR("sd-44m", -1, "sd-133m", 1, 3),		\
+	UNIPHIER_CLK_FACTOR("sd-33m", -1, "sd-200m", 1, 6),		\
+	UNIPHIER_CLK_FACTOR("sd-50m", -1, "sd-200m", 1, 4),		\
+	UNIPHIER_CLK_FACTOR("sd-67m", -1, "sd-200m", 1, 3),		\
+	UNIPHIER_CLK_FACTOR("sd-100m", -1, "sd-200m", 1, 2),		\
+	UNIPHIER_CLK_FACTOR("sd-40m", -1, "sd-200m", 1, 5),		\
+	UNIPHIER_CLK_FACTOR("sd-25m", -1, "sd-200m", 1, 8),		\
+	UNIPHIER_CLK_FACTOR("sd-22m", -1, "sd-133m", 1, 6)
+
+#define UNIPHIER_MIO_CLK_SD(_idx, ch)					\
+	{								\
+		.name = "sd" #ch "-sel",				\
+		.type = UNIPHIER_CLK_TYPE_MUX,				\
+		.idx = -1,						\
+		.data.mux = {						\
+			.parent_names = {				\
+				"sd-44m",				\
+				"sd-33m",				\
+				"sd-50m",				\
+				"sd-67m",				\
+				"sd-100m",				\
+				"sd-40m",				\
+				"sd-25m",				\
+				"sd-22m",				\
+			},						\
+			.num_parents = 8,				\
+			.reg = 0x30 + 0x200 * (ch),			\
+			.masks = {					\
+				0x00031000,				\
+				0x00031000,				\
+				0x00031000,				\
+				0x00031000,				\
+				0x00001300,				\
+				0x00001300,				\
+				0x00001300,				\
+				0x00001300,				\
+			},						\
+			.vals = {					\
+				0x00000000,				\
+				0x00010000,				\
+				0x00020000,				\
+				0x00030000,				\
+				0x00001000,				\
+				0x00001100,				\
+				0x00001200,				\
+				0x00001300,				\
+			},						\
+		},							\
+	},								\
+	UNIPHIER_CLK_GATE("sd" #ch, (_idx), "sd" #ch "-sel", 0x20 + 0x200 * (ch), 8)
+
+#define UNIPHIER_MIO_CLK_USB2(idx, ch)					\
+	UNIPHIER_CLK_GATE("usb2" #ch, (idx), "usb2", 0x20 + 0x200 * (ch), 28)
+
+#define UNIPHIER_MIO_CLK_USB2_PHY(idx, ch)				\
+	UNIPHIER_CLK_GATE("usb2" #ch "-phy", (idx), "usb2", 0x20 + 0x200 * (ch), 29)
+
+const struct uniphier_clk_data uniphier_ld4_mio_clk_data[] = {
+	UNIPHIER_MIO_CLK_SD_FIXED,
+	UNIPHIER_MIO_CLK_SD(0, 0),
+	UNIPHIER_MIO_CLK_SD(1, 1),
+	UNIPHIER_MIO_CLK_SD(2, 2),
+	UNIPHIER_CLK_GATE("miodmac", 7, NULL, 0x20, 25),
+	UNIPHIER_MIO_CLK_USB2(8, 0),
+	UNIPHIER_MIO_CLK_USB2(9, 1),
+	UNIPHIER_MIO_CLK_USB2(10, 2),
+	UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
+	UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
+	UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sd_clk_data[] = {
+	UNIPHIER_MIO_CLK_SD_FIXED,
+	UNIPHIER_MIO_CLK_SD(0, 0),
+	UNIPHIER_MIO_CLK_SD(1, 1),
+	{ /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier-mux.c b/drivers/clk/uniphier/clk-uniphier-mux.c
new file mode 100644
index 000000000..1998e9d4c
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-mux.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+#include "clk-uniphier.h"
+
+struct uniphier_clk_mux {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	unsigned int reg;
+	const unsigned int *masks;
+	const unsigned int *vals;
+};
+
+#define to_uniphier_clk_mux(_hw) container_of(_hw, struct uniphier_clk_mux, hw)
+
+static int uniphier_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
+
+	return regmap_write_bits(mux->regmap, mux->reg, mux->masks[index],
+				 mux->vals[index]);
+}
+
+static u8 uniphier_clk_mux_get_parent(struct clk_hw *hw)
+{
+	struct uniphier_clk_mux *mux = to_uniphier_clk_mux(hw);
+	unsigned int num_parents = clk_hw_get_num_parents(hw);
+	int ret;
+	unsigned int val;
+	unsigned int i;
+
+	ret = regmap_read(mux->regmap, mux->reg, &val);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < num_parents; i++)
+		if ((mux->masks[i] & val) == mux->vals[i])
+			return i;
+
+	return -EINVAL;
+}
+
+static const struct clk_ops uniphier_clk_mux_ops = {
+	.determine_rate = __clk_mux_determine_rate,
+	.set_parent = uniphier_clk_mux_set_parent,
+	.get_parent = uniphier_clk_mux_get_parent,
+};
+
+struct clk_hw *uniphier_clk_register_mux(struct device *dev,
+					 struct regmap *regmap,
+					 const char *name,
+				const struct uniphier_clk_mux_data *data)
+{
+	struct uniphier_clk_mux *mux;
+	struct clk_init_data init;
+	int ret;
+
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &uniphier_clk_mux_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = data->parent_names;
+	init.num_parents = data->num_parents;
+
+	mux->regmap = regmap;
+	mux->reg = data->reg;
+	mux->masks = data->masks;
+	mux->vals = data->vals;
+	mux->hw.init = &init;
+
+	ret = devm_clk_hw_register(dev, &mux->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &mux->hw;
+}
diff --git a/drivers/clk/uniphier/clk-uniphier-peri.c b/drivers/clk/uniphier/clk-uniphier-peri.c
new file mode 100644
index 000000000..3e32db9da
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-peri.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_PERI_CLK_UART(idx, ch)					\
+	UNIPHIER_CLK_GATE("uart" #ch, (idx), "uart", 0x24, 19 + (ch))
+
+#define UNIPHIER_PERI_CLK_I2C_COMMON					\
+	UNIPHIER_CLK_GATE("i2c-common", -1, "i2c", 0x20, 1)
+
+#define UNIPHIER_PERI_CLK_I2C(idx, ch)					\
+	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c-common", 0x24, 5 + (ch))
+
+#define UNIPHIER_PERI_CLK_FI2C(idx, ch)					\
+	UNIPHIER_CLK_GATE("i2c" #ch, (idx), "i2c", 0x24, 24 + (ch))
+
+#define UNIPHIER_PERI_CLK_SCSSI(idx, ch)				\
+	UNIPHIER_CLK_GATE("scssi" #ch, (idx), "spi", 0x20, 17 + (ch))
+
+#define UNIPHIER_PERI_CLK_MCSSI(idx)					\
+	UNIPHIER_CLK_GATE("mcssi", (idx), "spi", 0x24, 14)
+
+const struct uniphier_clk_data uniphier_ld4_peri_clk_data[] = {
+	UNIPHIER_PERI_CLK_UART(0, 0),
+	UNIPHIER_PERI_CLK_UART(1, 1),
+	UNIPHIER_PERI_CLK_UART(2, 2),
+	UNIPHIER_PERI_CLK_UART(3, 3),
+	UNIPHIER_PERI_CLK_I2C_COMMON,
+	UNIPHIER_PERI_CLK_I2C(4, 0),
+	UNIPHIER_PERI_CLK_I2C(5, 1),
+	UNIPHIER_PERI_CLK_I2C(6, 2),
+	UNIPHIER_PERI_CLK_I2C(7, 3),
+	UNIPHIER_PERI_CLK_I2C(8, 4),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_peri_clk_data[] = {
+	UNIPHIER_PERI_CLK_UART(0, 0),
+	UNIPHIER_PERI_CLK_UART(1, 1),
+	UNIPHIER_PERI_CLK_UART(2, 2),
+	UNIPHIER_PERI_CLK_UART(3, 3),
+	UNIPHIER_PERI_CLK_FI2C(4, 0),
+	UNIPHIER_PERI_CLK_FI2C(5, 1),
+	UNIPHIER_PERI_CLK_FI2C(6, 2),
+	UNIPHIER_PERI_CLK_FI2C(7, 3),
+	UNIPHIER_PERI_CLK_FI2C(8, 4),
+	UNIPHIER_PERI_CLK_FI2C(9, 5),
+	UNIPHIER_PERI_CLK_FI2C(10, 6),
+	UNIPHIER_PERI_CLK_SCSSI(11, 0),
+	UNIPHIER_PERI_CLK_SCSSI(12, 1),
+	UNIPHIER_PERI_CLK_SCSSI(13, 2),
+	UNIPHIER_PERI_CLK_SCSSI(14, 3),
+	UNIPHIER_PERI_CLK_MCSSI(15),
+	{ /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier-sys.c b/drivers/clk/uniphier/clk-uniphier-sys.c
new file mode 100644
index 000000000..0180470b2
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier-sys.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#include <linux/stddef.h>
+
+#include "clk-uniphier.h"
+
+#define UNIPHIER_LD4_SYS_CLK_SD					\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 8),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "vpll27a", 1, 2)
+
+#define UNIPHIER_PRO5_SYS_CLK_SD					\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 12),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 18)
+
+#define UNIPHIER_LD20_SYS_CLK_SD					\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 15)
+
+#define UNIPHIER_NX1_SYS_CLK_SD						\
+	UNIPHIER_CLK_FACTOR("sd-200m", -1, "spll", 1, 4),		\
+	UNIPHIER_CLK_FACTOR("sd-133m", -1, "spll", 1, 6)
+
+#define UNIPHIER_LD4_SYS_CLK_NAND(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 32),		\
+	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
+
+#define UNIPHIER_PRO5_SYS_CLK_NAND(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 48),		\
+	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x2104, 2)
+
+#define UNIPHIER_LD11_SYS_CLK_NAND(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-50m", -1, "spll", 1, 40),		\
+	UNIPHIER_CLK_GATE("nand", (idx), "nand-50m", 0x210c, 0)
+
+#define UNIPHIER_SYS_CLK_NAND_4X(idx)					\
+	UNIPHIER_CLK_FACTOR("nand-4x", (idx), "nand", 4, 1)
+
+#define UNIPHIER_LD11_SYS_CLK_EMMC(idx)					\
+	UNIPHIER_CLK_GATE("emmc", (idx), NULL, 0x210c, 2)
+
+#define UNIPHIER_LD4_SYS_CLK_STDMAC(idx)				\
+	UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x2104, 10)
+
+#define UNIPHIER_LD11_SYS_CLK_STDMAC(idx)				\
+	UNIPHIER_CLK_GATE("stdmac", (idx), NULL, 0x210c, 8)
+
+#define UNIPHIER_LD11_SYS_CLK_HSC(idx)					\
+	UNIPHIER_CLK_GATE("hsc", (idx), NULL, 0x210c, 9)
+
+#define UNIPHIER_PRO4_SYS_CLK_GIO(idx)					\
+	UNIPHIER_CLK_GATE("gio", (idx), NULL, 0x2104, 6)
+
+#define UNIPHIER_PRO4_SYS_CLK_USB3(idx, ch)				\
+	UNIPHIER_CLK_GATE("usb3" #ch, (idx), NULL, 0x2104, 16 + (ch))
+
+#define UNIPHIER_PRO4_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 8),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
+
+#define UNIPHIER_PRO5_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 12),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2104, 13)
+
+#define UNIPHIER_LD11_SYS_CLK_AIO(idx)					\
+	UNIPHIER_CLK_FACTOR("aio-io200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_GATE("aio", (idx), "aio-io200m", 0x2108, 0)
+
+#define UNIPHIER_LD11_SYS_CLK_EVEA(idx)					\
+	UNIPHIER_CLK_FACTOR("evea-io100m", -1, "spll", 1, 20),		\
+	UNIPHIER_CLK_GATE("evea", (idx), "evea-io100m", 0x2108, 1)
+
+#define UNIPHIER_LD11_SYS_CLK_EXIV(idx)					\
+	UNIPHIER_CLK_FACTOR("exiv-io200m", -1, "spll", 1, 10),		\
+	UNIPHIER_CLK_GATE("exiv", (idx), "exiv-io200m", 0x2110, 2)
+
+#define UNIPHIER_PRO4_SYS_CLK_ETHER(idx)				\
+	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x2104, 12)
+
+#define UNIPHIER_LD11_SYS_CLK_ETHER(idx)				\
+	UNIPHIER_CLK_GATE("ether", (idx), NULL, 0x210c, 6)
+
+const struct uniphier_clk_data uniphier_ld4_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 65, 1),		/* 1597.44 MHz */
+	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 6000, 512),	/* 288 MHz */
+	UNIPHIER_CLK_FACTOR("a2pll", -1, "ref", 24, 1),		/* 589.824 MHz */
+	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 5625, 512),	/* 270 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 16),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD4_SYS_CLK_SD,
+	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* Ether, HSC, MIO */
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1),		/* 1600 MHz */
+	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25),	/* 288 MHz */
+	UNIPHIER_CLK_FACTOR("a2pll", -1, "upll", 256, 125),	/* 589.824 MHz */
+	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),	/* 270 MHz */
+	UNIPHIER_CLK_FACTOR("gpll", -1, "ref", 10, 1),		/* 250 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "a2pll", 1, 8),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 32),
+	UNIPHIER_CLK_FACTOR("spi", 1, "spll", 1, 32),
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD4_SYS_CLK_SD,
+	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_PRO4_SYS_CLK_ETHER(6),
+	UNIPHIER_CLK_GATE("ether-gb", 7, "gpll", 0x2104, 5),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* HSC, MIO, RLE */
+	UNIPHIER_CLK_GATE("ether-phy", 10, "ref", 0x2260, 0),
+	UNIPHIER_PRO4_SYS_CLK_GIO(12),			/* Ether, SATA, USB3 */
+	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	UNIPHIER_CLK_FACTOR("usb30-hsphy0", 16, "upll", 1, 12),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb31-ssphy0", 20, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 18),
+	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x2104, 19),
+	UNIPHIER_PRO4_SYS_CLK_AIO(40),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_sld8_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 64, 1),		/* 1600 MHz */
+	UNIPHIER_CLK_FACTOR("upll", -1, "ref", 288, 25),	/* 288 MHz */
+	UNIPHIER_CLK_FACTOR("vpll27a", -1, "ref", 270, 25),	/* 270 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 20),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 32),
+	UNIPHIER_LD4_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD4_SYS_CLK_SD,
+	UNIPHIER_CLK_FACTOR("usb2", -1, "upll", 1, 12),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),			/* Ether, HSC, MIO */
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro5_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 120, 1),		/* 2400 MHz */
+	UNIPHIER_CLK_FACTOR("dapll1", -1, "ref", 128, 1),	/* 2560 MHz */
+	UNIPHIER_CLK_FACTOR("dapll2", -1, "dapll1", 144, 125),	/* 2949.12 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "dapll2", 1, 40),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
+	UNIPHIER_PRO5_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_PRO5_SYS_CLK_SD,
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC */
+	UNIPHIER_PRO4_SYS_CLK_GIO(12),				/* PCIe, USB3 */
+	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x2108, 2),
+	UNIPHIER_PRO5_SYS_CLK_AIO(40),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 96, 1),		/* 2400 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 27),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 48),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 48),
+	UNIPHIER_PRO5_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_PRO5_SYS_CLK_SD,
+	UNIPHIER_PRO4_SYS_CLK_ETHER(6),
+	UNIPHIER_LD4_SYS_CLK_STDMAC(8),				/* HSC, RLE */
+	/* GIO is always clock-enabled: no function for 0x2104 bit6 */
+	UNIPHIER_PRO4_SYS_CLK_USB3(14, 0),
+	UNIPHIER_PRO4_SYS_CLK_USB3(15, 1),
+	/* The document mentions 0x2104 bit 18, but not functional */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x2104, 19),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 17, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy1", 18, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x2104, 20),
+	UNIPHIER_CLK_FACTOR("usb31-ssphy0", 21, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x2104, 22),
+	UNIPHIER_PRO5_SYS_CLK_AIO(40),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld11_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 392, 5),		/* 1960 MHz */
+	UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),		/* 1600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("vspll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	/* Index 5 reserved for eMMC PHY */
+	UNIPHIER_LD11_SYS_CLK_ETHER(6),
+	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC, MIO */
+	UNIPHIER_LD11_SYS_CLK_HSC(9),
+	UNIPHIER_CLK_FACTOR("usb2", -1, "ref", 24, 25),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EVEA(41),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("mpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV3("spll", 3, 4, 8),
+	/* Note: both gear1 and gear4 are spll/4.  This is not a bug. */
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/4", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "mpll/2", "spll/4", "mpll/3", "spll/3",
+			     "spll/4", "spll/8", "mpll/4", "mpll/8"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_ld20_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 88, 1),		/* ARM: 2200 MHz */
+	UNIPHIER_CLK_FACTOR("gppll", -1, "ref", 52, 1),		/* Mali: 1300 MHz */
+	UNIPHIER_CLK_FACTOR("mpll", -1, "ref", 64, 1),		/* Codec: 1600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),		/* IPP: 2200 MHz */
+	UNIPHIER_CLK_FACTOR("vppll", -1, "ref", 504, 5),	/* 2520 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	/* Index 5 reserved for eMMC PHY */
+	UNIPHIER_LD20_SYS_CLK_SD,
+	UNIPHIER_LD11_SYS_CLK_ETHER(6),
+	UNIPHIER_LD11_SYS_CLK_STDMAC(8),			/* HSC */
+	UNIPHIER_LD11_SYS_CLK_HSC(9),
+	/* GIO is always clock-enabled: no function for 0x210c bit5 */
+	/*
+	 * clock for USB Link is enabled by the logic "OR" of bit 14 and bit 15.
+	 * We do not use bit 15 here.
+	 */
+	UNIPHIER_CLK_GATE("usb30", 14, NULL, 0x210c, 14),
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 12),
+	UNIPHIER_CLK_GATE("usb30-hsphy1", 17, NULL, 0x210c, 13),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy0", 18, "ref", 1, 1),
+	UNIPHIER_CLK_FACTOR("usb30-ssphy1", 19, "ref", 1, 1),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 4),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EVEA(41),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca72", 32, 0x8000, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 104, 1),		/* ARM: 2600 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 80, 1),		/* 2000 MHz */
+	UNIPHIER_CLK_FACTOR("s2pll", -1, "ref", 88, 1),		/* IPP: 2400 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 34),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 40),
+	UNIPHIER_CLK_FACTOR("spi", -1, "spll", 1, 40),
+	UNIPHIER_LD20_SYS_CLK_SD,
+	UNIPHIER_LD11_SYS_CLK_NAND(2),
+	UNIPHIER_SYS_CLK_NAND_4X(3),
+	UNIPHIER_LD11_SYS_CLK_EMMC(4),
+	UNIPHIER_CLK_GATE("ether0", 6, NULL, 0x210c, 9),
+	UNIPHIER_CLK_GATE("ether1", 7, NULL, 0x210c, 10),
+	UNIPHIER_CLK_GATE("usb30", 12, NULL, 0x210c, 4),	/* =GIO0 */
+	UNIPHIER_CLK_GATE("usb31-0", 13, NULL, 0x210c, 5),	/* =GIO1 */
+	UNIPHIER_CLK_GATE("usb31-1", 14, NULL, 0x210c, 6),	/* =GIO1-1 */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 16),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 18),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 20),
+	UNIPHIER_CLK_GATE("usb31-hsphy0", 20, NULL, 0x210c, 17),
+	UNIPHIER_CLK_GATE("usb31-ssphy0", 21, NULL, 0x210c, 19),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 3),
+	UNIPHIER_CLK_GATE("sata0", 28, NULL, 0x210c, 7),
+	UNIPHIER_CLK_GATE("sata1", 29, NULL, 0x210c, 8),
+	UNIPHIER_CLK_GATE("sata-phy", 30, NULL, 0x210c, 21),
+	UNIPHIER_LD11_SYS_CLK_AIO(40),
+	UNIPHIER_LD11_SYS_CLK_EXIV(42),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV4("cpll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("spll", 2, 3, 4, 8),
+	UNIPHIER_CLK_DIV4("s2pll", 2, 3, 4, 8),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 8,
+			     "cpll/2", "spll/2", "cpll/3", "spll/3",
+			     "spll/4", "spll/8", "cpll/4", "cpll/8"),
+	UNIPHIER_CLK_CPUGEAR("cpu-ipp", 34, 0x8100, 0xf, 8,
+			     "s2pll/2", "spll/2", "s2pll/3", "spll/3",
+			     "spll/4", "spll/8", "s2pll/4", "s2pll/8"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_nx1_sys_clk_data[] = {
+	UNIPHIER_CLK_FACTOR("cpll", -1, "ref", 100, 1),		/* ARM: 2500 MHz */
+	UNIPHIER_CLK_FACTOR("spll", -1, "ref", 32, 1),		/* 800 MHz */
+	UNIPHIER_CLK_FACTOR("uart", 0, "spll", 1, 6),
+	UNIPHIER_CLK_FACTOR("i2c", 1, "spll", 1, 16),
+	UNIPHIER_NX1_SYS_CLK_SD,
+	UNIPHIER_CLK_GATE("emmc", 4, NULL, 0x2108, 8),
+	UNIPHIER_CLK_GATE("ether", 6, NULL, 0x210c, 0),
+	UNIPHIER_CLK_GATE("usb30-0", 12, NULL, 0x210c, 16),	/* =GIO */
+	UNIPHIER_CLK_GATE("usb30-1", 13, NULL, 0x210c, 20),	/* =GIO1P */
+	UNIPHIER_CLK_GATE("usb30-hsphy0", 16, NULL, 0x210c, 24),
+	UNIPHIER_CLK_GATE("usb30-ssphy0", 17, NULL, 0x210c, 25),
+	UNIPHIER_CLK_GATE("usb30-ssphy1", 18, NULL, 0x210c, 26),
+	UNIPHIER_CLK_GATE("pcie", 24, NULL, 0x210c, 8),
+	UNIPHIER_CLK_GATE("voc", 52, NULL, 0x2110, 0),
+	UNIPHIER_CLK_GATE("hdmitx", 58, NULL, 0x2110, 8),
+	/* CPU gears */
+	UNIPHIER_CLK_DIV5("cpll", 2, 4, 8, 16, 32),
+	UNIPHIER_CLK_CPUGEAR("cpu-ca53", 33, 0x8080, 0xf, 5,
+			     "cpll/2", "cpll/4", "cpll/8", "cpll/16",
+			     "cpll/32"),
+	{ /* sentinel */ }
+};
+
+const struct uniphier_clk_data uniphier_pro4_sg_clk_data[] = {
+	UNIPHIER_CLK_DIV("gpll", 4),
+	{
+		.name = "sata-ref",
+		.type = UNIPHIER_CLK_TYPE_MUX,
+		.idx = 0,
+		.data.mux = {
+			.parent_names = { "gpll/4", "ref", },
+			.num_parents = 2,
+			.reg = 0x1a28,
+			.masks = { 0x1, 0x1, },
+			.vals  = { 0x0, 0x1, },
+		},
+	},
+	{ /* sentinel */ }
+};
diff --git a/drivers/clk/uniphier/clk-uniphier.h b/drivers/clk/uniphier/clk-uniphier.h
new file mode 100644
index 000000000..dea0c7829
--- /dev/null
+++ b/drivers/clk/uniphier/clk-uniphier.h
@@ -0,0 +1,160 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2016 Socionext Inc.
+ *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ */
+
+#ifndef __CLK_UNIPHIER_H__
+#define __CLK_UNIPHIER_H__
+
+struct clk_hw;
+struct device;
+struct regmap;
+
+#define UNIPHIER_CLK_CPUGEAR_MAX_PARENTS	16
+#define UNIPHIER_CLK_MUX_MAX_PARENTS		8
+
+enum uniphier_clk_type {
+	UNIPHIER_CLK_TYPE_CPUGEAR,
+	UNIPHIER_CLK_TYPE_FIXED_FACTOR,
+	UNIPHIER_CLK_TYPE_FIXED_RATE,
+	UNIPHIER_CLK_TYPE_GATE,
+	UNIPHIER_CLK_TYPE_MUX,
+};
+
+struct uniphier_clk_cpugear_data {
+	const char *parent_names[UNIPHIER_CLK_CPUGEAR_MAX_PARENTS];
+	unsigned int num_parents;
+	unsigned int regbase;
+	unsigned int mask;
+};
+
+struct uniphier_clk_fixed_factor_data {
+	const char *parent_name;
+	unsigned int mult;
+	unsigned int div;
+};
+
+struct uniphier_clk_fixed_rate_data {
+	unsigned long fixed_rate;
+};
+
+struct uniphier_clk_gate_data {
+	const char *parent_name;
+	unsigned int reg;
+	unsigned int bit;
+};
+
+struct uniphier_clk_mux_data {
+	const char *parent_names[UNIPHIER_CLK_MUX_MAX_PARENTS];
+	unsigned int num_parents;
+	unsigned int reg;
+	unsigned int masks[UNIPHIER_CLK_MUX_MAX_PARENTS];
+	unsigned int vals[UNIPHIER_CLK_MUX_MAX_PARENTS];
+};
+
+struct uniphier_clk_data {
+	const char *name;
+	enum uniphier_clk_type type;
+	int idx;
+	union {
+		struct uniphier_clk_cpugear_data cpugear;
+		struct uniphier_clk_fixed_factor_data factor;
+		struct uniphier_clk_fixed_rate_data rate;
+		struct uniphier_clk_gate_data gate;
+		struct uniphier_clk_mux_data mux;
+	} data;
+};
+
+#define UNIPHIER_CLK_CPUGEAR(_name, _idx, _regbase, _mask,	\
+			     _num_parents, ...)			\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_CPUGEAR,		\
+		.idx = (_idx),					\
+		.data.cpugear = {				\
+			.parent_names = { __VA_ARGS__ },	\
+			.num_parents = (_num_parents),		\
+			.regbase = (_regbase),			\
+			.mask = (_mask)				\
+		 },						\
+	}
+
+#define UNIPHIER_CLK_FACTOR(_name, _idx, _parent, _mult, _div)	\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_FIXED_FACTOR,		\
+		.idx = (_idx),					\
+		.data.factor = {				\
+			.parent_name = (_parent),		\
+			.mult = (_mult),			\
+			.div = (_div),				\
+		},						\
+	}
+
+#define UNIPHIER_CLK_GATE(_name, _idx, _parent, _reg, _bit)	\
+	{							\
+		.name = (_name),				\
+		.type = UNIPHIER_CLK_TYPE_GATE,			\
+		.idx = (_idx),					\
+		.data.gate = {					\
+			.parent_name = (_parent),		\
+			.reg = (_reg),				\
+			.bit = (_bit),				\
+		},						\
+	}
+
+#define UNIPHIER_CLK_DIV(parent, div)				\
+	UNIPHIER_CLK_FACTOR(parent "/" #div, -1, parent, 1, div)
+
+#define UNIPHIER_CLK_DIV2(parent, div0, div1)			\
+	UNIPHIER_CLK_DIV(parent, div0),				\
+	UNIPHIER_CLK_DIV(parent, div1)
+
+#define UNIPHIER_CLK_DIV3(parent, div0, div1, div2)		\
+	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
+	UNIPHIER_CLK_DIV(parent, div2)
+
+#define UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3)	\
+	UNIPHIER_CLK_DIV2(parent, div0, div1),			\
+	UNIPHIER_CLK_DIV2(parent, div2, div3)
+
+#define UNIPHIER_CLK_DIV5(parent, div0, div1, div2, div3, div4)	\
+	UNIPHIER_CLK_DIV4(parent, div0, div1, div2, div3),	\
+	UNIPHIER_CLK_DIV(parent, div4)
+
+struct clk_hw *uniphier_clk_register_cpugear(struct device *dev,
+					     struct regmap *regmap,
+					     const char *name,
+				const struct uniphier_clk_cpugear_data *data);
+struct clk_hw *uniphier_clk_register_fixed_factor(struct device *dev,
+						  const char *name,
+			const struct uniphier_clk_fixed_factor_data *data);
+struct clk_hw *uniphier_clk_register_fixed_rate(struct device *dev,
+						const char *name,
+			const struct uniphier_clk_fixed_rate_data *data);
+struct clk_hw *uniphier_clk_register_gate(struct device *dev,
+					  struct regmap *regmap,
+					  const char *name,
+				const struct uniphier_clk_gate_data *data);
+struct clk_hw *uniphier_clk_register_mux(struct device *dev,
+					 struct regmap *regmap,
+					 const char *name,
+				const struct uniphier_clk_mux_data *data);
+
+extern const struct uniphier_clk_data uniphier_ld4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_sld8_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs2_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld11_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld20_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_pxs3_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_nx1_sys_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_mio_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro5_sd_clk_data[];
+extern const struct uniphier_clk_data uniphier_ld4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_peri_clk_data[];
+extern const struct uniphier_clk_data uniphier_pro4_sg_clk_data[];
+
+#endif /* __CLK_UNIPHIER_H__ */