ata: libata-scsi: fix ata_dsm_trim_pages() kernel-docgrafted

make htmldocs fails with:

  Documentation/driver-api/libata:604: ./drivers/ata/libata-scsi.c:2301:
  ERROR: Unexpected indentation. [docutils]

The Return: section of ata_dsm_trim_pages() ends its first sentence with
a colon and continues with an indented bullet list. reStructuredText
requires a blank line before an indented block, so docutils chokes on
the list.

Simply adding the missing blank line does not work either: Return: is a
kernel-doc "special section", which is terminated by the first blank
line, so the bullet list would end up in the Description section,
detached from the sentence introducing it.

Spell the two bounds out as prose instead, so that the Return: section
stays self-contained. Documentation-only change.

Fixes: e64e6b5dc867 ("ata: libata-scsi: scale DSM TRIM payload by MAX PAGES PER DSM COMMAND")
Reported-by: Thomas Huth <thuth@redhat.com>
Closes: https://lore.kernel.org/linux-ide/b0a0b8e8-cc4f-4c7b-8bc5-fee0712d405a@redhat.com/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20260916130031.29990-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>

1 files changed, 167 insertions, 0 deletions

diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
new file mode 100644
index 000000000..385964196
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data qcs404 = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x430405d,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.user_val = 0x8,
+	.user_vco_mask = 0x100000,
+	.low_vco_max_rate = 1248000000,
+	.min_rate = 537600000UL,
+	.max_rate = 2900000000UL,
+};
+
+static const struct hfpll_data msm8976_a53 = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x341600,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.l_val = 0x35,
+	.user_val = 0x109,
+	.min_rate = 902400000UL,
+	.max_rate = 1478400000UL,
+};
+
+static const struct hfpll_data msm8976_a72 = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x4e0405d,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.l_val = 0x3e,
+	.user_val = 0x100109,
+	.min_rate = 940800000UL,
+	.max_rate = 2016000000UL,
+};
+
+static const struct hfpll_data msm8976_cci = {
+	.mode_reg = 0x00,
+	.l_reg = 0x04,
+	.m_reg = 0x08,
+	.n_reg = 0x0c,
+	.user_reg = 0x10,
+	.config_reg = 0x14,
+	.config_val = 0x141400,
+	.status_reg = 0x1c,
+	.lock_bit = 16,
+
+	.l_val = 0x20,
+	.user_val = 0x100109,
+	.min_rate = 556800000UL,
+	.max_rate = 902400000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+	{ .compatible = "qcom,msm8976-hfpll-a53", .data = &msm8976_a53 },
+	{ .compatible = "qcom,msm8976-hfpll-a72", .data = &msm8976_a72 },
+	{ .compatible = "qcom,msm8976-hfpll-cci", .data = &msm8976_cci },
+	{ .compatible = "qcom,qcs404-hfpll", .data = &qcs404 },
+	/* Deprecated in bindings */
+	{ .compatible = "qcom,hfpll", .data = &qcs404 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static const struct regmap_config hfpll_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x30,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *regmap;
+	struct clk_hfpll *h;
+	struct clk_init_data init = {
+		.num_parents = 1,
+		.ops = &clk_ops_hfpll,
+		/*
+		 * rather than marking the clock critical and forcing the clock
+		 * to be always enabled, we make sure that the clock is not
+		 * disabled: the firmware remains responsible of enabling this
+		 * clock (for more info check the commit log)
+		 */
+		.flags = CLK_IGNORE_UNUSED,
+	};
+	int ret;
+	struct clk_parent_data pdata = { .index = 0 };
+
+	h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+	if (!h)
+		return -ENOMEM;
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	if (of_property_read_string_index(dev->of_node, "clock-output-names",
+					  0, &init.name))
+		return -ENODEV;
+
+	init.parent_data = &pdata;
+
+	h->d = of_device_get_match_data(&pdev->dev);
+	h->clkr.hw.init = &init;
+	spin_lock_init(&h->lock);
+
+	ret = devm_clk_register_regmap(dev, &h->clkr);
+	if (ret) {
+		dev_err(dev, "failed to register regmap clock: %d\n", ret);
+		return ret;
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
+					   &h->clkr.hw);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+	.probe		= qcom_hfpll_probe,
+	.driver		= {
+		.name	= "qcom-hfpll",
+		.of_match_table = qcom_hfpll_match_table,
+	},
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");