openrisc: fix arbitrary kernel memory access via or1k_atomic syscallgrafted

sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.

    l.lwz   r29,0(r4)
    l.lwz   r27,0(r5)
    l.sw    0(r4),r27
    l.sw    0(r5),r29

The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.

A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.

This gives an unprivileged process a kernel read/write primitive. It
overwrites kernel data such as the sys_call_table, gaining code
execution in kernel context.

Check both pointers before entering the critical section. Add fixups
for the four memory accesses so faults on valid but unmapped user
addresses return -EFAULT.

[shorne@gmail.com: fix comment style]
Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Cc: stable@vger.kernel.org
Signed-off-by: Ali Ahmet Memis <ali@iusegentoo.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

3 files changed, 122 insertions, 0 deletions

diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
new file mode 100644
index 000000000..c965fd091
--- /dev/null
+++ b/drivers/clk/imgtec/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config COMMON_CLK_BOSTON
+	bool "Clock driver for MIPS Boston boards"
+	depends on MIPS || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Enable this to support the system & CPU clocks on the MIPS Boston
+	  development board from Imagination Technologies. These are simple
+	  fixed rate clocks whose rate is determined by reading a platform
+	  provided register.
diff --git a/drivers/clk/imgtec/Makefile b/drivers/clk/imgtec/Makefile
new file mode 100644
index 000000000..d2e81426c
--- /dev/null
+++ b/drivers/clk/imgtec/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_COMMON_CLK_BOSTON)		+= clk-boston.o
diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
new file mode 100644
index 000000000..f28c3ab93
--- /dev/null
+++ b/drivers/clk/imgtec/clk-boston.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016-2017 Imagination Technologies
+ * Author: Paul Burton <paul.burton@mips.com>
+ */
+
+#define pr_fmt(fmt) "clk-boston: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV		0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV	(0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT	(0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL	(0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV	(0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+static u32 ext_field(u32 val, u32 mask)
+{
+	return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+	unsigned long in_freq, cpu_freq, sys_freq;
+	uint mmcmdiv, mul, cpu_div, sys_div;
+	struct clk_hw_onecell_data *onecell;
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int err;
+
+	regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(regmap)) {
+		pr_err("failed to find regmap\n");
+		return;
+	}
+
+	err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+	if (err) {
+		pr_err("failed to read mmcm_div register: %d\n", err);
+		return;
+	}
+
+	in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+	mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+	sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+	sys_freq = mult_frac(in_freq, mul, sys_div);
+
+	cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+	cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+	onecell = kzalloc_flex(*onecell, hws, BOSTON_CLK_COUNT);
+	if (!onecell)
+		return;
+
+	onecell->num = BOSTON_CLK_COUNT;
+
+	hw = clk_hw_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register input clock: %pe\n", hw);
+		goto fail_input;
+	}
+	onecell->hws[BOSTON_CLK_INPUT] = hw;
+
+	hw = clk_hw_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register sys clock: %pe\n", hw);
+		goto fail_sys;
+	}
+	onecell->hws[BOSTON_CLK_SYS] = hw;
+
+	hw = clk_hw_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register cpu clock: %pe\n", hw);
+		goto fail_cpu;
+	}
+	onecell->hws[BOSTON_CLK_CPU] = hw;
+
+	err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, onecell);
+	if (err) {
+		pr_err("failed to add DT provider: %d\n", err);
+		goto fail_clk_add;
+	}
+
+	return;
+
+fail_clk_add:
+	clk_hw_unregister_fixed_rate(onecell->hws[BOSTON_CLK_CPU]);
+fail_cpu:
+	clk_hw_unregister_fixed_rate(onecell->hws[BOSTON_CLK_SYS]);
+fail_sys:
+	clk_hw_unregister_fixed_rate(onecell->hws[BOSTON_CLK_INPUT]);
+fail_input:
+	kfree(onecell);
+}
+
+/*
+ * Use CLK_OF_DECLARE so that this driver is probed early enough to provide the
+ * CPU frequency for use with the GIC or cop0 counters/timers.
+ */
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);