ftrace: Synchronize the initialization of ftrace_opsgrafted

There's some internal state that ftrace_ops needs to have set, but since
it can be declared outside of the ftrace.c code, it calls
ftrace_ops_init() on the ops in every global function. The issue is that
if two tasks call it on the same ops at the same time it is possible to
have the initialization of one corrupt the initialization of the other
call.

Create a ops_mutex to use to synchronize every initialization of the
ftrace_ops. The mutex is taken within checking the ftrace_ops flag that
states it was initializied but the flag is checked again after the mutex
has been taken. Checking first outside the mutex allows it to shortcut
having to take the mutex. But then the check needs to be done again after
the mute is taken in case of races.

Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home
Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock")
Reported-by: sashiko-bot@kernel.org
Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

3 files changed, 122 insertions, 0 deletions

diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
new file mode 100644
index 000000000..c965fd091
--- /dev/null
+++ b/drivers/clk/imgtec/Kconfig
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config COMMON_CLK_BOSTON
+	bool "Clock driver for MIPS Boston boards"
+	depends on MIPS || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Enable this to support the system & CPU clocks on the MIPS Boston
+	  development board from Imagination Technologies. These are simple
+	  fixed rate clocks whose rate is determined by reading a platform
+	  provided register.
diff --git a/drivers/clk/imgtec/Makefile b/drivers/clk/imgtec/Makefile
new file mode 100644
index 000000000..d2e81426c
--- /dev/null
+++ b/drivers/clk/imgtec/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_COMMON_CLK_BOSTON)		+= clk-boston.o
diff --git a/drivers/clk/imgtec/clk-boston.c b/drivers/clk/imgtec/clk-boston.c
new file mode 100644
index 000000000..f28c3ab93
--- /dev/null
+++ b/drivers/clk/imgtec/clk-boston.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016-2017 Imagination Technologies
+ * Author: Paul Burton <paul.burton@mips.com>
+ */
+
+#define pr_fmt(fmt) "clk-boston: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+
+#include <dt-bindings/clock/boston-clock.h>
+
+#define BOSTON_PLAT_MMCMDIV		0x30
+# define BOSTON_PLAT_MMCMDIV_CLK0DIV	(0xff << 0)
+# define BOSTON_PLAT_MMCMDIV_INPUT	(0xff << 8)
+# define BOSTON_PLAT_MMCMDIV_MUL	(0xff << 16)
+# define BOSTON_PLAT_MMCMDIV_CLK1DIV	(0xff << 24)
+
+#define BOSTON_CLK_COUNT 3
+
+static u32 ext_field(u32 val, u32 mask)
+{
+	return (val & mask) >> (ffs(mask) - 1);
+}
+
+static void __init clk_boston_setup(struct device_node *np)
+{
+	unsigned long in_freq, cpu_freq, sys_freq;
+	uint mmcmdiv, mul, cpu_div, sys_div;
+	struct clk_hw_onecell_data *onecell;
+	struct regmap *regmap;
+	struct clk_hw *hw;
+	int err;
+
+	regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(regmap)) {
+		pr_err("failed to find regmap\n");
+		return;
+	}
+
+	err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
+	if (err) {
+		pr_err("failed to read mmcm_div register: %d\n", err);
+		return;
+	}
+
+	in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
+	mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
+
+	sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
+	sys_freq = mult_frac(in_freq, mul, sys_div);
+
+	cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
+	cpu_freq = mult_frac(in_freq, mul, cpu_div);
+
+	onecell = kzalloc_flex(*onecell, hws, BOSTON_CLK_COUNT);
+	if (!onecell)
+		return;
+
+	onecell->num = BOSTON_CLK_COUNT;
+
+	hw = clk_hw_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register input clock: %pe\n", hw);
+		goto fail_input;
+	}
+	onecell->hws[BOSTON_CLK_INPUT] = hw;
+
+	hw = clk_hw_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register sys clock: %pe\n", hw);
+		goto fail_sys;
+	}
+	onecell->hws[BOSTON_CLK_SYS] = hw;
+
+	hw = clk_hw_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
+	if (IS_ERR(hw)) {
+		pr_err("failed to register cpu clock: %pe\n", hw);
+		goto fail_cpu;
+	}
+	onecell->hws[BOSTON_CLK_CPU] = hw;
+
+	err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, onecell);
+	if (err) {
+		pr_err("failed to add DT provider: %d\n", err);
+		goto fail_clk_add;
+	}
+
+	return;
+
+fail_clk_add:
+	clk_hw_unregister_fixed_rate(onecell->hws[BOSTON_CLK_CPU]);
+fail_cpu:
+	clk_hw_unregister_fixed_rate(onecell->hws[BOSTON_CLK_SYS]);
+fail_sys:
+	clk_hw_unregister_fixed_rate(onecell->hws[BOSTON_CLK_INPUT]);
+fail_input:
+	kfree(onecell);
+}
+
+/*
+ * Use CLK_OF_DECLARE so that this driver is probed early enough to provide the
+ * CPU frequency for use with the GIC or cop0 counters/timers.
+ */
+CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);