Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 220 insertions, 0 deletions

diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c
new file mode 100644
index 000000000..956ebe208
--- /dev/null
+++ b/drivers/char/uv_mmtimer.c
@@ -0,0 +1,220 @@
+/*
+ * Timer device implementation for SGI UV platform.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2009 Silicon Graphics, Inc.  All rights reserved.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mmtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/posix-timers.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
+
+#include <asm/genapic.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
+
+MODULE_AUTHOR("Dimitri Sivanich <sivanich@sgi.com>");
+MODULE_DESCRIPTION("SGI UV Memory Mapped RTC Timer");
+MODULE_LICENSE("GPL");
+
+/* name of the device, usually in /dev */
+#define UV_MMTIMER_NAME "mmtimer"
+#define UV_MMTIMER_DESC "SGI UV Memory Mapped RTC Timer"
+#define UV_MMTIMER_VERSION "1.0"
+
+static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg);
+static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma);
+
+/*
+ * Period in femtoseconds (10^-15 s)
+ */
+static unsigned long uv_mmtimer_femtoperiod;
+
+static const struct file_operations uv_mmtimer_fops = {
+	.owner = THIS_MODULE,
+	.mmap =	uv_mmtimer_mmap,
+	.unlocked_ioctl = uv_mmtimer_ioctl,
+	.llseek = noop_llseek,
+};
+
+/**
+ * uv_mmtimer_ioctl - ioctl interface for /dev/uv_mmtimer
+ * @file: file structure for the device
+ * @cmd: command to execute
+ * @arg: optional argument to command
+ *
+ * Executes the command specified by @cmd.  Returns 0 for success, < 0 for
+ * failure.
+ *
+ * Valid commands:
+ *
+ * %MMTIMER_GETOFFSET - Should return the offset (relative to the start
+ * of the page where the registers are mapped) for the counter in question.
+ *
+ * %MMTIMER_GETRES - Returns the resolution of the clock in femto (10^-15)
+ * seconds
+ *
+ * %MMTIMER_GETFREQ - Copies the frequency of the clock in Hz to the address
+ * specified by @arg
+ *
+ * %MMTIMER_GETBITS - Returns the number of bits in the clock's counter
+ *
+ * %MMTIMER_MMAPAVAIL - Returns 1 if registers can be mmap'd into userspace
+ *
+ * %MMTIMER_GETCOUNTER - Gets the current value in the counter and places it
+ * in the address specified by @arg.
+ */
+static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	int ret = 0;
+
+	switch (cmd) {
+	case MMTIMER_GETOFFSET:	/* offset of the counter */
+		/*
+		 * Starting with HUB rev 2.0, the UV RTC register is
+		 * replicated across all cachelines of it's own page.
+		 * This allows faster simultaneous reads from a given socket.
+		 *
+		 * The offset returned is in 64 bit units.
+		 */
+		if (uv_get_min_hub_revision_id() == 1)
+			ret = 0;
+		else
+			ret = ((uv_blade_processor_id() * L1_CACHE_BYTES) %
+					PAGE_SIZE) / 8;
+		break;
+
+	case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
+		if (copy_to_user((unsigned long __user *)arg,
+				&uv_mmtimer_femtoperiod, sizeof(unsigned long)))
+			ret = -EFAULT;
+		break;
+
+	case MMTIMER_GETFREQ: /* frequency in Hz */
+		if (copy_to_user((unsigned long __user *)arg,
+				&sn_rtc_cycles_per_second,
+				sizeof(unsigned long)))
+			ret = -EFAULT;
+		break;
+
+	case MMTIMER_GETBITS: /* number of bits in the clock */
+		ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK);
+		break;
+
+	case MMTIMER_MMAPAVAIL:
+		ret = 1;
+		break;
+
+	case MMTIMER_GETCOUNTER:
+		if (copy_to_user((unsigned long __user *)arg,
+				(unsigned long *)uv_local_mmr_address(UVH_RTC),
+				sizeof(unsigned long)))
+			ret = -EFAULT;
+		break;
+	default:
+		ret = -ENOTTY;
+		break;
+	}
+	return ret;
+}
+
+/**
+ * uv_mmtimer_mmap - maps the clock's registers into userspace
+ * @file: file structure for the device
+ * @vma: VMA to map the registers into
+ *
+ * Calls remap_pfn_range() to map the clock's registers into
+ * the calling process' address space.
+ */
+static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	unsigned long uv_mmtimer_addr;
+
+	if (vma->vm_end - vma->vm_start != PAGE_SIZE)
+		return -EINVAL;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EPERM;
+
+	if (PAGE_SIZE > (1 << 16))
+		return -ENOSYS;
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	uv_mmtimer_addr = UV_LOCAL_MMR_BASE | UVH_RTC;
+	uv_mmtimer_addr &= ~(PAGE_SIZE - 1);
+	uv_mmtimer_addr &= 0xfffffffffffffffUL;
+
+	if (remap_pfn_range(vma, vma->vm_start, uv_mmtimer_addr >> PAGE_SHIFT,
+					PAGE_SIZE, vma->vm_page_prot)) {
+		printk(KERN_ERR "remap_pfn_range failed in uv_mmtimer_mmap\n");
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static struct miscdevice uv_mmtimer_miscdev = {
+	MISC_DYNAMIC_MINOR,
+	UV_MMTIMER_NAME,
+	&uv_mmtimer_fops
+};
+
+
+/**
+ * uv_mmtimer_init - device initialization routine
+ *
+ * Does initial setup for the uv_mmtimer device.
+ */
+static int __init uv_mmtimer_init(void)
+{
+	if (!is_uv_system()) {
+		printk(KERN_ERR "%s: Hardware unsupported\n", UV_MMTIMER_NAME);
+		return -1;
+	}
+
+	/*
+	 * Sanity check the cycles/sec variable
+	 */
+	if (sn_rtc_cycles_per_second < 100000) {
+		printk(KERN_ERR "%s: unable to determine clock frequency\n",
+		       UV_MMTIMER_NAME);
+		return -1;
+	}
+
+	uv_mmtimer_femtoperiod = ((unsigned long)1E15 +
+				sn_rtc_cycles_per_second / 2) /
+				sn_rtc_cycles_per_second;
+
+	if (misc_register(&uv_mmtimer_miscdev)) {
+		printk(KERN_ERR "%s: failed to register device\n",
+		       UV_MMTIMER_NAME);
+		return -1;
+	}
+
+	printk(KERN_INFO "%s: v%s, %ld MHz\n", UV_MMTIMER_DESC,
+		UV_MMTIMER_VERSION,
+		sn_rtc_cycles_per_second/(unsigned long)1E6);
+
+	return 0;
+}
+
+module_init(uv_mmtimer_init);