x86/kprobes: Fix crash when probing CS CALL instructionsgrafted

When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.

The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:

<__hrtimer_run_queues+249>:  nopl   0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>:  mov    %r14,%rdi
<__hrtimer_run_queues+257>:  cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>:  mov    %eax,%r12d
<__hrtimer_run_queues+266>:  xchg   %ax,%ax
<__hrtimer_run_queues+268>:  mov    %r13,%rdi

Which triggers this crash:

  BUG: unable to handle page fault for address: 00000000000f41c9
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 0 P4D 0
  Oops: 0002 [#1] SMP NOPTI
  CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
  RIP: 0010:__hrtimer_run_queues+0x106/0x230

Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.

The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.

During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.

Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.

[ mingo: Refined the changelog ]

Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260908073742.GA10517@didi-ThinkCentre-M920t-N000

1 files changed, 217 insertions, 0 deletions

diff --git a/drivers/cache/ax45mp_cache.c b/drivers/cache/ax45mp_cache.c
new file mode 100644
index 000000000..934c5087e
--- /dev/null
+++ b/drivers/cache/ax45mp_cache.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * non-coherent cache functions for Andes AX45MP
+ *
+ * Copyright (C) 2023 Renesas Electronics Corp.
+ */
+
+#include <linux/cacheflush.h>
+#include <linux/cacheinfo.h>
+#include <linux/dma-direction.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/dma-noncoherent.h>
+
+/* L2 cache registers */
+#define AX45MP_L2C_REG_CTL_OFFSET		0x8
+
+#define AX45MP_L2C_REG_C0_CMD_OFFSET		0x40
+#define AX45MP_L2C_REG_C0_ACC_OFFSET		0x48
+#define AX45MP_L2C_REG_STATUS_OFFSET		0x80
+
+/* D-cache operation */
+#define AX45MP_CCTL_L1D_VA_INVAL		0 /* Invalidate an L1 cache entry */
+#define AX45MP_CCTL_L1D_VA_WB			1 /* Write-back an L1 cache entry */
+
+/* L2 CCTL status */
+#define AX45MP_CCTL_L2_STATUS_IDLE		0
+
+/* L2 CCTL status cores mask */
+#define AX45MP_CCTL_L2_STATUS_C0_MASK		0xf
+
+/* L2 cache operation */
+#define AX45MP_CCTL_L2_PA_INVAL			0x8 /* Invalidate an L2 cache entry */
+#define AX45MP_CCTL_L2_PA_WB			0x9 /* Write-back an L2 cache entry */
+
+#define AX45MP_L2C_REG_PER_CORE_OFFSET		0x10
+#define AX45MP_CCTL_L2_STATUS_PER_CORE_OFFSET	4
+
+#define AX45MP_L2C_REG_CN_CMD_OFFSET(n)	\
+	(AX45MP_L2C_REG_C0_CMD_OFFSET + ((n) * AX45MP_L2C_REG_PER_CORE_OFFSET))
+#define AX45MP_L2C_REG_CN_ACC_OFFSET(n)	\
+	(AX45MP_L2C_REG_C0_ACC_OFFSET + ((n) * AX45MP_L2C_REG_PER_CORE_OFFSET))
+#define AX45MP_CCTL_L2_STATUS_CN_MASK(n)	\
+	(AX45MP_CCTL_L2_STATUS_C0_MASK << ((n) * AX45MP_CCTL_L2_STATUS_PER_CORE_OFFSET))
+
+#define AX45MP_CCTL_REG_UCCTLBEGINADDR_NUM	0x80b
+#define AX45MP_CCTL_REG_UCCTLCOMMAND_NUM	0x80c
+
+#define AX45MP_CACHE_LINE_SIZE			64
+
+struct ax45mp_priv {
+	void __iomem *l2c_base;
+	u32 ax45mp_cache_line_size;
+};
+
+static struct ax45mp_priv ax45mp_priv;
+
+/* L2 Cache operations */
+static inline uint32_t ax45mp_cpu_l2c_get_cctl_status(void)
+{
+	return readl(ax45mp_priv.l2c_base + AX45MP_L2C_REG_STATUS_OFFSET);
+}
+
+static void ax45mp_cpu_cache_operation(unsigned long start, unsigned long end,
+				       unsigned int l1_op, unsigned int l2_op)
+{
+	unsigned long line_size = ax45mp_priv.ax45mp_cache_line_size;
+	void __iomem *base = ax45mp_priv.l2c_base;
+	int mhartid = smp_processor_id();
+	unsigned long pa;
+
+	while (end > start) {
+		csr_write(AX45MP_CCTL_REG_UCCTLBEGINADDR_NUM, start);
+		csr_write(AX45MP_CCTL_REG_UCCTLCOMMAND_NUM, l1_op);
+
+		pa = virt_to_phys((void *)start);
+		writel(pa, base + AX45MP_L2C_REG_CN_ACC_OFFSET(mhartid));
+		writel(l2_op, base + AX45MP_L2C_REG_CN_CMD_OFFSET(mhartid));
+		while ((ax45mp_cpu_l2c_get_cctl_status() &
+			AX45MP_CCTL_L2_STATUS_CN_MASK(mhartid)) !=
+			AX45MP_CCTL_L2_STATUS_IDLE)
+			;
+
+		start += line_size;
+	}
+}
+
+/* Write-back L1 and L2 cache entry */
+static inline void ax45mp_cpu_dcache_wb_range(unsigned long start, unsigned long end)
+{
+	ax45mp_cpu_cache_operation(start, end, AX45MP_CCTL_L1D_VA_WB,
+				   AX45MP_CCTL_L2_PA_WB);
+}
+
+/* Invalidate the L1 and L2 cache entry */
+static inline void ax45mp_cpu_dcache_inval_range(unsigned long start, unsigned long end)
+{
+	ax45mp_cpu_cache_operation(start, end, AX45MP_CCTL_L1D_VA_INVAL,
+				   AX45MP_CCTL_L2_PA_INVAL);
+}
+
+static void ax45mp_dma_cache_inv(phys_addr_t paddr, size_t size)
+{
+	unsigned long start = (unsigned long)phys_to_virt(paddr);
+	unsigned long end = start + size;
+	unsigned long line_size;
+	unsigned long flags;
+
+	if (unlikely(start == end))
+		return;
+
+	line_size = ax45mp_priv.ax45mp_cache_line_size;
+
+	start = start & (~(line_size - 1));
+	end = ((end + line_size - 1) & (~(line_size - 1)));
+
+	local_irq_save(flags);
+
+	ax45mp_cpu_dcache_inval_range(start, end);
+
+	local_irq_restore(flags);
+}
+
+static void ax45mp_dma_cache_wback(phys_addr_t paddr, size_t size)
+{
+	unsigned long start = (unsigned long)phys_to_virt(paddr);
+	unsigned long end = start + size;
+	unsigned long line_size;
+	unsigned long flags;
+
+	if (unlikely(start == end))
+		return;
+
+	line_size = ax45mp_priv.ax45mp_cache_line_size;
+	start = start & (~(line_size - 1));
+	end = ((end + line_size - 1) & (~(line_size - 1)));
+	local_irq_save(flags);
+	ax45mp_cpu_dcache_wb_range(start, end);
+	local_irq_restore(flags);
+}
+
+static void ax45mp_dma_cache_wback_inv(phys_addr_t paddr, size_t size)
+{
+	ax45mp_dma_cache_wback(paddr, size);
+	ax45mp_dma_cache_inv(paddr, size);
+}
+
+static int ax45mp_get_l2_line_size(struct device_node *np)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "cache-line-size", &ax45mp_priv.ax45mp_cache_line_size);
+	if (ret) {
+		pr_err("Failed to get cache-line-size, defaulting to 64 bytes\n");
+		return ret;
+	}
+
+	if (ax45mp_priv.ax45mp_cache_line_size != AX45MP_CACHE_LINE_SIZE) {
+		pr_err("Expected cache-line-size to be 64 bytes (found:%u)\n",
+		       ax45mp_priv.ax45mp_cache_line_size);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct riscv_nonstd_cache_ops ax45mp_cmo_ops __initdata = {
+	.wback = &ax45mp_dma_cache_wback,
+	.inv = &ax45mp_dma_cache_inv,
+	.wback_inv = &ax45mp_dma_cache_wback_inv,
+};
+
+static const struct of_device_id ax45mp_cache_ids[] = {
+	{ .compatible = "andestech,ax45mp-cache" },
+	{ /* sentinel */ }
+};
+
+static int __init ax45mp_cache_init(void)
+{
+	struct resource res;
+	int ret;
+
+	struct device_node *np __free(device_node) =
+		of_find_matching_node(NULL, ax45mp_cache_ids);
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
+
+	/*
+	 * If IOCP is present on the Andes AX45MP core riscv_cbom_block_size
+	 * will be 0 for sure, so we can definitely rely on it. If
+	 * riscv_cbom_block_size = 0 we don't need to handle CMO using SW any
+	 * more so we just return success here and only if its being set we
+	 * continue further in the probe path.
+	 */
+	if (!riscv_cbom_block_size)
+		return 0;
+
+	ax45mp_priv.l2c_base = ioremap(res.start, resource_size(&res));
+	if (!ax45mp_priv.l2c_base)
+		return -ENOMEM;
+
+	ret = ax45mp_get_l2_line_size(np);
+	if (ret) {
+		iounmap(ax45mp_priv.l2c_base);
+		return ret;
+	}
+
+	riscv_noncoherent_register_cache_ops(&ax45mp_cmo_ops);
+
+	return 0;
+}
+early_initcall(ax45mp_cache_init);