Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 186 insertions, 0 deletions

diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
new file mode 100644
index 000000000..3f802b7c8
--- /dev/null
+++ b/drivers/bluetooth/btrsi.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/unaligned.h>
+#include <net/rsi_91x.h>
+
+#define RSI_DMA_ALIGN	8
+#define RSI_FRAME_DESC_SIZE	16
+#define RSI_HEADROOM_FOR_BT_HAL	(RSI_FRAME_DESC_SIZE + RSI_DMA_ALIGN)
+
+struct rsi_hci_adapter {
+	void *priv;
+	struct rsi_proto_ops *proto_ops;
+	struct hci_dev *hdev;
+};
+
+static int rsi_hci_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_close(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_flush(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct rsi_hci_adapter *h_adapter = hci_get_drvdata(hdev);
+	struct sk_buff *new_skb = NULL;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		break;
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		break;
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		break;
+	}
+
+	if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
+		/* Insufficient skb headroom - allocate a new skb */
+		new_skb = skb_realloc_headroom(skb, RSI_HEADROOM_FOR_BT_HAL);
+		if (unlikely(!new_skb))
+			return -ENOMEM;
+		bt_cb(new_skb)->pkt_type = hci_skb_pkt_type(skb);
+		kfree_skb(skb);
+		skb = new_skb;
+		if (!IS_ALIGNED((unsigned long)skb->data, RSI_DMA_ALIGN)) {
+			u8 *skb_data = skb->data;
+			int skb_len = skb->len;
+
+			skb_push(skb, RSI_DMA_ALIGN);
+			skb_pull(skb, PTR_ALIGN(skb->data,
+						RSI_DMA_ALIGN) - skb->data);
+			memmove(skb->data, skb_data, skb_len);
+			skb_trim(skb, skb_len);
+		}
+	}
+
+	return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
+						   RSI_BT_Q);
+}
+
+static int rsi_hci_recv_pkt(void *priv, const u8 *pkt)
+{
+	struct rsi_hci_adapter *h_adapter = priv;
+	struct hci_dev *hdev = h_adapter->hdev;
+	struct sk_buff *skb;
+	int pkt_len = get_unaligned_le16(pkt) & 0x0fff;
+
+	skb = dev_alloc_skb(pkt_len);
+	if (!skb)
+		return -ENOMEM;
+
+	memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
+	skb_put(skb, pkt_len);
+	h_adapter->hdev->stat.byte_rx += skb->len;
+
+	hci_skb_pkt_type(skb) = pkt[14];
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
+{
+	struct rsi_hci_adapter *h_adapter = NULL;
+	struct hci_dev *hdev;
+	int err = 0;
+
+	h_adapter = kzalloc_obj(*h_adapter);
+	if (!h_adapter)
+		return -ENOMEM;
+
+	h_adapter->priv = priv;
+	h_adapter->proto_ops = ops;
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Failed to alloc HCI device");
+		goto err;
+	}
+
+	h_adapter->hdev = hdev;
+
+	if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
+		hdev->bus = HCI_SDIO;
+	else
+		hdev->bus = HCI_USB;
+
+	hci_set_drvdata(hdev, h_adapter);
+	hdev->open = rsi_hci_open;
+	hdev->close = rsi_hci_close;
+	hdev->flush = rsi_hci_flush;
+	hdev->send = rsi_hci_send_pkt;
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		BT_ERR("HCI registration failed with errcode %d", err);
+		hci_free_dev(hdev);
+		goto err;
+	}
+
+	ops->set_bt_context(priv, h_adapter);
+
+	return 0;
+err:
+	h_adapter->hdev = NULL;
+	kfree(h_adapter);
+	return -EINVAL;
+}
+
+static void rsi_hci_detach(void *priv)
+{
+	struct rsi_hci_adapter *h_adapter = priv;
+	struct hci_dev *hdev;
+
+	if (!h_adapter)
+		return;
+
+	hdev = h_adapter->hdev;
+	if (hdev) {
+		hci_unregister_dev(hdev);
+		hci_free_dev(hdev);
+		h_adapter->hdev = NULL;
+	}
+
+	kfree(h_adapter);
+}
+
+const struct rsi_mod_ops rsi_bt_ops = {
+	.attach	= rsi_hci_attach,
+	.detach	= rsi_hci_detach,
+	.recv_pkt = rsi_hci_recv_pkt,
+};
+EXPORT_SYMBOL(rsi_bt_ops);
+
+static int rsi_91x_bt_module_init(void)
+{
+	return 0;
+}
+
+static void rsi_91x_bt_module_exit(void)
+{
+	return;
+}
+
+module_init(rsi_91x_bt_module_init);
+module_exit(rsi_91x_bt_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("RSI BT driver");
+MODULE_LICENSE("Dual BSD/GPL");