diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-24 08:46:03 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2026-08-24 08:46:03 -0700 |
| commit | cf9610f9116d55c5a66ef9f1faecacabd93a9322 (patch) | |
| tree | 757a3d280760c654767631cab5ad8af2d86d1848 /drivers/bluetooth/btqcomsmd.c | |
| download | linux-stable-cf9610f9116d55c5a66ef9f1faecacabd93a9322.tar.gz linux-stable-cf9610f9116d55c5a66ef9f1faecacabd93a9322.zip | |
Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted
Pull pin control updates from Linus Walleij:
"Core changes:
- Use the non-blocking mux_state_try_select() in the generic MUX pin
control back-end
- Free pin maps on pinctrl_generic_to_map() failure in the core
helpers
New hardware pin control:
- Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
(this is for the low power audio, LPASS = Low Power Audio SubSystem
portions)
- Upboard support on top of the Intel pin controller
- Apple T6030 and T6031 support (just compatible strings)
- Samsung Exynos 8855 SoC
- Mediatek MT6858 SoC
- Rockchip RK3308B and RV1106 SoCs
- Airoha EN7523 and AN7563 SoCs
Improvements:
- Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable
- Qualcomm improvements on top of the Qualcomm PDC (power domain
controller) irqchip improvements from tglx:s tree
- Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups
- The NPCM8xx driver has been put into shape fixing many pin and
group definitions
- Some non-urgent Tegra 264 pin assignments are fixed up
- Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
pin assignments, missing features etc"
* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
pinctrl: meson: sync some modify from A4
pinctrl: meson: a4: Add input enable pin configuration
pinctrl: realtek: rtd1625: remove unused group name spdif_sel
pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
Revert "Merge branch 'ib-rsk7204' into devel"
pinctrl: rockchip: Add RV1106 pinctrl support
dt-bindings: pinctrl: rockchip: Add RV1106 compatible
pinctrl: rockchip: Decode drive strength in the get function
pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
pinctrl: airoha: add support of an7563 SoC
dt-bindings: pinctrl: airoha: add support of an7563 pin controller
pinctrl: airoha: try to find chip scu node by phandle first
pinctrl: airoha: add support of en7523 SoC
dt-bindings: pinctrl: airoha: add support of en7523 pin controller
pinctrl: airoha: an7583: add support for olt pinmux
pinctrl: airoha: an7583: add support for pon_alt pinmux
pinctrl: airoha: an7583: add support for npu_uart pinmux
dt-bindings: pinctrl: airoha: an7583: add missed features
...
Diffstat (limited to 'drivers/bluetooth/btqcomsmd.c')
| -rw-r--r-- | drivers/bluetooth/btqcomsmd.c | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c new file mode 100644 index 000000000..d2e13fcb6 --- /dev/null +++ b/drivers/bluetooth/btqcomsmd.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016, Linaro Ltd. + * Copyright (c) 2015, Sony Mobile Communications Inc. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/rpmsg.h> +#include <linux/of.h> + +#include <linux/soc/qcom/wcnss_ctrl.h> +#include <linux/platform_device.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "btqca.h" + +struct btqcomsmd { + struct hci_dev *hdev; + + struct rpmsg_endpoint *acl_channel; + struct rpmsg_endpoint *cmd_channel; +}; + +static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type, + const void *data, size_t count) +{ + struct sk_buff *skb; + + /* Use GFP_ATOMIC as we're in IRQ context */ + skb = bt_skb_alloc(count, GFP_ATOMIC); + if (!skb) { + hdev->stat.err_rx++; + return -ENOMEM; + } + + hci_skb_pkt_type(skb) = type; + skb_put_data(skb, data, count); + + return hci_recv_frame(hdev, skb); +} + +static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data, + int count, void *priv, u32 addr) +{ + struct btqcomsmd *btq = priv; + + btq->hdev->stat.byte_rx += count; + return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count); +} + +static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data, + int count, void *priv, u32 addr) +{ + struct btqcomsmd *btq = priv; + + btq->hdev->stat.byte_rx += count; + return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count); +} + +static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct btqcomsmd *btq = hci_get_drvdata(hdev); + int ret; + + switch (hci_skb_pkt_type(skb)) { + case HCI_ACLDATA_PKT: + ret = rpmsg_send(btq->acl_channel, skb->data, skb->len); + if (ret) { + hdev->stat.err_tx++; + break; + } + hdev->stat.acl_tx++; + hdev->stat.byte_tx += skb->len; + break; + case HCI_COMMAND_PKT: + ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len); + if (ret) { + hdev->stat.err_tx++; + break; + } + hdev->stat.cmd_tx++; + hdev->stat.byte_tx += skb->len; + break; + default: + ret = -EILSEQ; + break; + } + + if (!ret) + kfree_skb(skb); + + return ret; +} + +static int btqcomsmd_open(struct hci_dev *hdev) +{ + return 0; +} + +static int btqcomsmd_close(struct hci_dev *hdev) +{ + return 0; +} + +static int btqcomsmd_setup(struct hci_dev *hdev) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) + return PTR_ERR(skb); + kfree_skb(skb); + + /* Devices do not have persistent storage for BD address. Retrieve + * it from the firmware node property. + */ + hci_set_quirk(hdev, HCI_QUIRK_USE_BDADDR_PROPERTY); + + return 0; +} + +static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) +{ + int ret; + + ret = qca_set_bdaddr_rome(hdev, bdaddr); + if (ret) + return ret; + + /* The firmware stops responding for a while after setting the bdaddr, + * causing timeouts for subsequent commands. Sleep a bit to avoid this. + */ + usleep_range(1000, 10000); + return 0; +} + +static int btqcomsmd_probe(struct platform_device *pdev) +{ + struct btqcomsmd *btq; + struct hci_dev *hdev; + void *wcnss; + int ret; + + btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL); + if (!btq) + return -ENOMEM; + + wcnss = dev_get_drvdata(pdev->dev.parent); + + btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL", + btqcomsmd_acl_callback, btq); + if (IS_ERR(btq->acl_channel)) + return PTR_ERR(btq->acl_channel); + + btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD", + btqcomsmd_cmd_callback, btq); + if (IS_ERR(btq->cmd_channel)) { + ret = PTR_ERR(btq->cmd_channel); + goto destroy_acl_channel; + } + + hdev = hci_alloc_dev(); + if (!hdev) { + ret = -ENOMEM; + goto destroy_cmd_channel; + } + + hci_set_drvdata(hdev, btq); + btq->hdev = hdev; + SET_HCIDEV_DEV(hdev, &pdev->dev); + + hdev->bus = HCI_SMD; + hdev->open = btqcomsmd_open; + hdev->close = btqcomsmd_close; + hdev->send = btqcomsmd_send; + hdev->setup = btqcomsmd_setup; + hdev->set_bdaddr = btqcomsmd_set_bdaddr; + + ret = hci_register_dev(hdev); + if (ret < 0) + goto hci_free_dev; + + platform_set_drvdata(pdev, btq); + + return 0; + +hci_free_dev: + hci_free_dev(hdev); +destroy_cmd_channel: + rpmsg_destroy_ept(btq->cmd_channel); +destroy_acl_channel: + rpmsg_destroy_ept(btq->acl_channel); + + return ret; +} + +static void btqcomsmd_remove(struct platform_device *pdev) +{ + struct btqcomsmd *btq = platform_get_drvdata(pdev); + + hci_unregister_dev(btq->hdev); + hci_free_dev(btq->hdev); + + rpmsg_destroy_ept(btq->cmd_channel); + rpmsg_destroy_ept(btq->acl_channel); +} + +static const struct of_device_id btqcomsmd_of_match[] = { + { .compatible = "qcom,wcnss-bt", }, + { }, +}; +MODULE_DEVICE_TABLE(of, btqcomsmd_of_match); + +static struct platform_driver btqcomsmd_driver = { + .probe = btqcomsmd_probe, + .remove = btqcomsmd_remove, + .driver = { + .name = "btqcomsmd", + .of_match_table = btqcomsmd_of_match, + }, +}; + +module_platform_driver(btqcomsmd_driver); + +MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); +MODULE_DESCRIPTION("Qualcomm SMD HCI driver"); +MODULE_LICENSE("GPL v2"); |
