Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 230 insertions, 0 deletions

diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
new file mode 100644
index 000000000..d2e13fcb6
--- /dev/null
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016, Linaro Ltd.
+ * Copyright (c) 2015, Sony Mobile Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/rpmsg.h>
+#include <linux/of.h>
+
+#include <linux/soc/qcom/wcnss_ctrl.h>
+#include <linux/platform_device.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btqca.h"
+
+struct btqcomsmd {
+	struct hci_dev *hdev;
+
+	struct rpmsg_endpoint *acl_channel;
+	struct rpmsg_endpoint *cmd_channel;
+};
+
+static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
+			   const void *data, size_t count)
+{
+	struct sk_buff *skb;
+
+	/* Use GFP_ATOMIC as we're in IRQ context */
+	skb = bt_skb_alloc(count, GFP_ATOMIC);
+	if (!skb) {
+		hdev->stat.err_rx++;
+		return -ENOMEM;
+	}
+
+	hci_skb_pkt_type(skb) = type;
+	skb_put_data(skb, data, count);
+
+	return hci_recv_frame(hdev, skb);
+}
+
+static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data,
+				  int count, void *priv, u32 addr)
+{
+	struct btqcomsmd *btq = priv;
+
+	btq->hdev->stat.byte_rx += count;
+	return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
+}
+
+static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data,
+				  int count, void *priv, u32 addr)
+{
+	struct btqcomsmd *btq = priv;
+
+	btq->hdev->stat.byte_rx += count;
+	return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
+}
+
+static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	struct btqcomsmd *btq = hci_get_drvdata(hdev);
+	int ret;
+
+	switch (hci_skb_pkt_type(skb)) {
+	case HCI_ACLDATA_PKT:
+		ret = rpmsg_send(btq->acl_channel, skb->data, skb->len);
+		if (ret) {
+			hdev->stat.err_tx++;
+			break;
+		}
+		hdev->stat.acl_tx++;
+		hdev->stat.byte_tx += skb->len;
+		break;
+	case HCI_COMMAND_PKT:
+		ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len);
+		if (ret) {
+			hdev->stat.err_tx++;
+			break;
+		}
+		hdev->stat.cmd_tx++;
+		hdev->stat.byte_tx += skb->len;
+		break;
+	default:
+		ret = -EILSEQ;
+		break;
+	}
+
+	if (!ret)
+		kfree_skb(skb);
+
+	return ret;
+}
+
+static int btqcomsmd_open(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int btqcomsmd_close(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static int btqcomsmd_setup(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+	kfree_skb(skb);
+
+	/* Devices do not have persistent storage for BD address. Retrieve
+	 * it from the firmware node property.
+	 */
+	hci_set_quirk(hdev, HCI_QUIRK_USE_BDADDR_PROPERTY);
+
+	return 0;
+}
+
+static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	int ret;
+
+	ret = qca_set_bdaddr_rome(hdev, bdaddr);
+	if (ret)
+		return ret;
+
+	/* The firmware stops responding for a while after setting the bdaddr,
+	 * causing timeouts for subsequent commands. Sleep a bit to avoid this.
+	 */
+	usleep_range(1000, 10000);
+	return 0;
+}
+
+static int btqcomsmd_probe(struct platform_device *pdev)
+{
+	struct btqcomsmd *btq;
+	struct hci_dev *hdev;
+	void *wcnss;
+	int ret;
+
+	btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL);
+	if (!btq)
+		return -ENOMEM;
+
+	wcnss = dev_get_drvdata(pdev->dev.parent);
+
+	btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
+						   btqcomsmd_acl_callback, btq);
+	if (IS_ERR(btq->acl_channel))
+		return PTR_ERR(btq->acl_channel);
+
+	btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
+						   btqcomsmd_cmd_callback, btq);
+	if (IS_ERR(btq->cmd_channel)) {
+		ret = PTR_ERR(btq->cmd_channel);
+		goto destroy_acl_channel;
+	}
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		ret = -ENOMEM;
+		goto destroy_cmd_channel;
+	}
+
+	hci_set_drvdata(hdev, btq);
+	btq->hdev = hdev;
+	SET_HCIDEV_DEV(hdev, &pdev->dev);
+
+	hdev->bus = HCI_SMD;
+	hdev->open = btqcomsmd_open;
+	hdev->close = btqcomsmd_close;
+	hdev->send = btqcomsmd_send;
+	hdev->setup = btqcomsmd_setup;
+	hdev->set_bdaddr = btqcomsmd_set_bdaddr;
+
+	ret = hci_register_dev(hdev);
+	if (ret < 0)
+		goto hci_free_dev;
+
+	platform_set_drvdata(pdev, btq);
+
+	return 0;
+
+hci_free_dev:
+	hci_free_dev(hdev);
+destroy_cmd_channel:
+	rpmsg_destroy_ept(btq->cmd_channel);
+destroy_acl_channel:
+	rpmsg_destroy_ept(btq->acl_channel);
+
+	return ret;
+}
+
+static void btqcomsmd_remove(struct platform_device *pdev)
+{
+	struct btqcomsmd *btq = platform_get_drvdata(pdev);
+
+	hci_unregister_dev(btq->hdev);
+	hci_free_dev(btq->hdev);
+
+	rpmsg_destroy_ept(btq->cmd_channel);
+	rpmsg_destroy_ept(btq->acl_channel);
+}
+
+static const struct of_device_id btqcomsmd_of_match[] = {
+	{ .compatible = "qcom,wcnss-bt", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, btqcomsmd_of_match);
+
+static struct platform_driver btqcomsmd_driver = {
+	.probe = btqcomsmd_probe,
+	.remove = btqcomsmd_remove,
+	.driver  = {
+		.name  = "btqcomsmd",
+		.of_match_table = btqcomsmd_of_match,
+	},
+};
+
+module_platform_driver(btqcomsmd_driver);
+
+MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
+MODULE_DESCRIPTION("Qualcomm SMD HCI driver");
+MODULE_LICENSE("GPL v2");