Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 266 insertions, 0 deletions

diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
new file mode 100644
index 000000000..c738ad040
--- /dev/null
+++ b/drivers/bluetooth/bcm203x.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Broadcom Blutonium firmware driver
+ *
+ *  Copyright (C) 2003  Maxim Krasnyansky <maxk@qualcomm.com>
+ *  Copyright (C) 2003  Marcel Holtmann <marcel@holtmann.org>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.2"
+
+static const struct usb_device_id bcm203x_table[] = {
+	/* Broadcom Blutonium (BCM2033) */
+	{ USB_DEVICE(0x0a5c, 0x2033) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, bcm203x_table);
+
+#define BCM203X_ERROR		0
+#define BCM203X_RESET		1
+#define BCM203X_LOAD_MINIDRV	2
+#define BCM203X_SELECT_MEMORY	3
+#define BCM203X_CHECK_MEMORY	4
+#define BCM203X_LOAD_FIRMWARE	5
+#define BCM203X_CHECK_FIRMWARE	6
+
+#define BCM203X_IN_EP		0x81
+#define BCM203X_OUT_EP		0x02
+
+struct bcm203x_data {
+	struct usb_device	*udev;
+
+	unsigned long		state;
+
+	struct work_struct	work;
+	atomic_t		shutdown;
+
+	struct urb		*urb;
+	unsigned char		*buffer;
+
+	unsigned char		*fw_data;
+	unsigned int		fw_size;
+	unsigned int		fw_sent;
+};
+
+static void bcm203x_complete(struct urb *urb)
+{
+	struct bcm203x_data *data = urb->context;
+	struct usb_device *udev = urb->dev;
+	int len;
+
+	BT_DBG("udev %p urb %p", udev, urb);
+
+	if (urb->status) {
+		BT_ERR("URB failed with status %d", urb->status);
+		data->state = BCM203X_ERROR;
+		return;
+	}
+
+	switch (data->state) {
+	case BCM203X_LOAD_MINIDRV:
+		memcpy(data->buffer, "#", 1);
+
+		usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+				data->buffer, 1, bcm203x_complete, data);
+
+		data->state = BCM203X_SELECT_MEMORY;
+
+		/* use workqueue to have a small delay */
+		schedule_work(&data->work);
+		break;
+
+	case BCM203X_SELECT_MEMORY:
+		usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
+				data->buffer, 32, bcm203x_complete, data, 1);
+
+		data->state = BCM203X_CHECK_MEMORY;
+
+		if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+			BT_ERR("Can't submit URB");
+		break;
+
+	case BCM203X_CHECK_MEMORY:
+		if (data->buffer[0] != '#') {
+			BT_ERR("Memory select failed");
+			data->state = BCM203X_ERROR;
+			break;
+		}
+
+		data->state = BCM203X_LOAD_FIRMWARE;
+		fallthrough;
+	case BCM203X_LOAD_FIRMWARE:
+		if (data->fw_sent == data->fw_size) {
+			usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, BCM203X_IN_EP),
+				data->buffer, 32, bcm203x_complete, data, 1);
+
+			data->state = BCM203X_CHECK_FIRMWARE;
+		} else {
+			len = min_t(uint, data->fw_size - data->fw_sent, 4096);
+
+			usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+				data->fw_data + data->fw_sent, len, bcm203x_complete, data);
+
+			data->fw_sent += len;
+		}
+
+		if (usb_submit_urb(data->urb, GFP_ATOMIC) < 0)
+			BT_ERR("Can't submit URB");
+		break;
+
+	case BCM203X_CHECK_FIRMWARE:
+		if (data->buffer[0] != '.') {
+			BT_ERR("Firmware loading failed");
+			data->state = BCM203X_ERROR;
+			break;
+		}
+
+		data->state = BCM203X_RESET;
+		break;
+	}
+}
+
+static void bcm203x_work(struct work_struct *work)
+{
+	struct bcm203x_data *data =
+		container_of(work, struct bcm203x_data, work);
+
+	if (atomic_read(&data->shutdown))
+		return;
+
+	if (usb_submit_urb(data->urb, GFP_KERNEL) < 0)
+		BT_ERR("Can't submit URB");
+}
+
+static int bcm203x_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	const struct firmware *firmware;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct bcm203x_data *data;
+	int size;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->udev  = udev;
+	data->state = BCM203X_LOAD_MINIDRV;
+
+	data->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!data->urb)
+		return -ENOMEM;
+
+	if (request_firmware(&firmware, "BCM2033-MD.hex", &udev->dev) < 0) {
+		BT_ERR("Mini driver request failed");
+		usb_free_urb(data->urb);
+		return -EIO;
+	}
+
+	BT_DBG("minidrv data %p size %zu", firmware->data, firmware->size);
+
+	size = max_t(uint, firmware->size, 4096);
+
+	data->buffer = kmalloc(size, GFP_KERNEL);
+	if (!data->buffer) {
+		BT_ERR("Can't allocate memory for mini driver");
+		release_firmware(firmware);
+		usb_free_urb(data->urb);
+		return -ENOMEM;
+	}
+
+	memcpy(data->buffer, firmware->data, firmware->size);
+
+	usb_fill_bulk_urb(data->urb, udev, usb_sndbulkpipe(udev, BCM203X_OUT_EP),
+			data->buffer, firmware->size, bcm203x_complete, data);
+
+	release_firmware(firmware);
+
+	if (request_firmware(&firmware, "BCM2033-FW.bin", &udev->dev) < 0) {
+		BT_ERR("Firmware request failed");
+		usb_free_urb(data->urb);
+		kfree(data->buffer);
+		return -EIO;
+	}
+
+	BT_DBG("firmware data %p size %zu", firmware->data, firmware->size);
+
+	data->fw_data = kmemdup(firmware->data, firmware->size, GFP_KERNEL);
+	if (!data->fw_data) {
+		BT_ERR("Can't allocate memory for firmware image");
+		release_firmware(firmware);
+		usb_free_urb(data->urb);
+		kfree(data->buffer);
+		return -ENOMEM;
+	}
+
+	data->fw_size = firmware->size;
+	data->fw_sent = 0;
+
+	release_firmware(firmware);
+
+	INIT_WORK(&data->work, bcm203x_work);
+
+	usb_set_intfdata(intf, data);
+
+	/* use workqueue to have a small delay */
+	schedule_work(&data->work);
+
+	return 0;
+}
+
+static void bcm203x_disconnect(struct usb_interface *intf)
+{
+	struct bcm203x_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("intf %p", intf);
+
+	atomic_inc(&data->shutdown);
+	cancel_work_sync(&data->work);
+
+	usb_kill_urb(data->urb);
+
+	usb_set_intfdata(intf, NULL);
+
+	usb_free_urb(data->urb);
+	kfree(data->fw_data);
+	kfree(data->buffer);
+}
+
+static struct usb_driver bcm203x_driver = {
+	.name		= "bcm203x",
+	.probe		= bcm203x_probe,
+	.disconnect	= bcm203x_disconnect,
+	.id_table	= bcm203x_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(bcm203x_driver);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Broadcom Blutonium firmware driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("BCM2033-MD.hex");
+MODULE_FIRMWARE("BCM2033-FW.bin");