Merge tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linuxgrafted

Pull io_uring fixes from Jens Axboe:

 - Fix a task_work add use-after-free with SQPOLL.

   The sqpoll thread could pop and complete the last request while
   io_req_normal_work_add() was still looking at them after the mpscq
   push.

   Use the same approach as DEFER_TASKRUN to protect from that, holding
   an RCU read lock across the add, and have exit wait for an RCU grace
   period for SQPOLL rings as well.

 - CQE32 ring fixes: correct the free entry check for 32b CQEs, zero the
   big_cqe for aux CQEs, and only post the dummy skip CQE on CQE_MIXED
   rings

 - Mark the source filter table as COW when cloning bpf filters, so
   registering another filter on the source doesn't modify the shared
   table in place

 - Initialize the task context before running the BPF loop

 - Requeue zcrx multishot receives stopped by a local resource

 - End a TX_TIMESTAMP multishot cmd when the CQ is full (lollipopkit)

* tag 'io_uring-7.3-20261002' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  io_uring: fix task_work add use-after-free with SQPOLL
  io_uring/cmd_net: end TX_TIMESTAMP multishot when the CQ is full
  io_uring/zcrx: requeue multishot receives stopped by a local resource
  io_uring: initialize task context before running the BPF loop
  io_uring: zero big_cqe for aux CQEs on CQE32 rings
  io_uring: fix free entry check for 32b CQEs on CQE32 rings
  io_uring: only post the dummy skip CQE on CQE_MIXED rings
  io_uring/bpf_filter: mark source as COW when cloning filters

1 files changed, 475 insertions, 0 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
new file mode 100644
index 000000000..4e8c24d75
--- /dev/null
+++ b/drivers/bluetooth/Kconfig
@@ -0,0 +1,475 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Bluetooth device drivers"
+	depends on BT
+
+config BT_INTEL
+	tristate
+	select REGMAP
+
+config BT_BCM
+	tristate
+	select FW_LOADER
+
+config BT_RTL
+	tristate
+	select FW_LOADER
+
+config BT_QCA
+	tristate
+	select FW_LOADER
+
+config BT_MTK
+	tristate
+	select FW_LOADER
+
+config BT_HCIBTUSB
+	tristate "HCI USB driver"
+	depends on USB
+	select BT_INTEL
+	help
+	  Bluetooth HCI USB driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  USB interface.
+
+	  Say Y here to compile support for Bluetooth USB devices into the
+	  kernel or say M to compile it as module (btusb).
+
+config BT_HCIBTUSB_AUTOSUSPEND
+	bool "Enable USB autosuspend for Bluetooth USB devices by default"
+	depends on BT_HCIBTUSB
+	help
+	  Say Y here to enable USB autosuspend for Bluetooth USB devices by
+	  default.
+
+	  This can be overridden by passing btusb.enable_autosuspend=[y|n]
+	  on the kernel commandline.
+
+config BT_HCIBTUSB_POLL_SYNC
+	bool "Enable USB poll_sync for Bluetooth USB devices by default"
+	depends on BT_HCIBTUSB
+	default y
+	help
+	  poll_sync synchronizes the USB data and event endpoints by
+	  prioritizing the later.
+
+	  Say Y here to enable USB poll_sync for Bluetooth USB devices by
+	  default.
+
+config BT_HCIBTUSB_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIBTUSB
+	select BT_BCM
+	default y
+	help
+	  The Broadcom protocol support enables firmware and patchram
+	  download support for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
+config BT_HCIBTUSB_MTK
+	bool "MediaTek protocol support"
+	depends on BT_HCIBTUSB
+	select BT_MTK
+	default n
+	help
+	  The MediaTek protocol support enables firmware download
+	  support and chip initialization for MediaTek Bluetooth
+	  USB controllers.
+
+	  Say Y here to compile support for MediaTek protocol.
+
+config BT_HCIBTUSB_RTL
+	bool "Realtek protocol support"
+	depends on BT_HCIBTUSB
+	select BT_RTL
+	default y
+	help
+	  The Realtek protocol support enables firmware and configuration
+	  download support for Realtek Bluetooth controllers.
+
+	  Say Y here to compile support for Realtek protocol.
+
+config BT_HCIBTSDIO
+	tristate "HCI SDIO driver"
+	depends on MMC
+	help
+	  Bluetooth HCI SDIO driver.
+	  This driver is required if you want to use Bluetooth device with
+	  SDIO interface.
+
+	  Say Y here to compile support for Bluetooth SDIO devices into the
+	  kernel or say M to compile it as module (btsdio).
+
+config BT_HCIUART
+	tristate "HCI UART driver"
+	depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
+	depends on NVMEM || !NVMEM
+	depends on POWER_SEQUENCING || !POWER_SEQUENCING
+	depends on TTY
+	help
+	  Bluetooth HCI UART driver.
+	  This driver is required if you want to use Bluetooth devices with
+	  serial port interface. You will also need this driver if you have
+	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
+	  adapter and BrainBoxes Bluetooth PC Card.
+
+	  Say Y here to compile support for Bluetooth UART devices into the
+	  kernel or say M to compile it as module (hci_uart).
+
+config BT_HCIUART_SERDEV
+	bool
+	depends on SERIAL_DEV_BUS && BT_HCIUART
+	default y
+
+config BT_HCIUART_H4
+	bool "UART (H4) protocol support"
+	depends on BT_HCIUART
+	help
+	  UART (H4) is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Bluetooth devices
+	  with UART interface, including PCMCIA and CF cards.
+
+	  Say Y here to compile support for HCI UART (H4) protocol.
+
+config BT_HCIUART_NOKIA
+	tristate "UART Nokia H4+ protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	depends on GPIOLIB
+	depends on PM
+	select BT_HCIUART_H4
+	select BT_BCM
+	help
+	  Nokia H4+ is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for Bluetooth devices
+	  with UART interface in Nokia devices.
+
+	  Say Y here to compile support for Nokia's H4+ protocol.
+
+config BT_HCIUART_BCSP
+	bool "BCSP protocol support"
+	depends on BT_HCIUART
+	select BITREVERSE
+	help
+	  BCSP (BlueCore Serial Protocol) is serial protocol for communication
+	  between Bluetooth device and host. This protocol is required for non
+	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
+	  CF cards.
+
+	  Say Y here to compile support for HCI BCSP protocol.
+
+config BT_HCIUART_ATH3K
+	bool "Atheros AR300x serial support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	help
+	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
+	  communication between host and Atheros AR300x Bluetooth devices.
+	  This protocol enables AR300x chips to be enabled with
+	  power management support.
+	  Enable this if you have Atheros AR300x serial Bluetooth device.
+
+	  Say Y here to compile support for HCI UART ATH3K protocol.
+
+config BT_HCIUART_LL
+	bool "HCILL protocol support"
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	help
+	  HCILL (HCI Low Level) is a serial protocol for communication
+	  between Bluetooth device and host. This protocol is required for
+	  serial Bluetooth devices that are based on Texas Instruments'
+	  BRF chips.
+
+	  Say Y here to compile support for HCILL protocol.
+
+config BT_HCIUART_3WIRE
+	bool "Three-wire UART (H5) protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select CRC_CCITT
+	help
+	  The HCI Three-wire UART Transport Layer makes it possible to
+	  user the Bluetooth HCI over a serial port interface. The HCI
+	  Three-wire UART Transport Layer assumes that the UART
+	  communication may have bit errors, overrun errors or burst
+	  errors and thereby making CTS/RTS lines unnecessary.
+
+	  Say Y here to compile support for Three-wire UART protocol.
+
+config BT_HCIUART_INTEL
+	bool "Intel protocol support"
+	depends on BT_HCIUART
+	depends on GPIOLIB
+	select BT_HCIUART_H4
+	select BT_INTEL
+	help
+	  The Intel protocol support enables Bluetooth HCI over serial
+	  port interface for Intel Bluetooth controllers.
+
+	  Say Y here to compile support for Intel protocol.
+
+config BT_HCIUART_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
+	depends on GPIOLIB
+	select BT_HCIUART_H4
+	select BT_BCM
+	help
+	  The Broadcom protocol support enables Bluetooth HCI over serial
+	  port interface for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
+config BT_HCIUART_RTL
+	bool "Realtek protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	depends on GPIOLIB
+	depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
+	select BT_HCIUART_3WIRE
+	select BT_RTL
+	help
+	  The Realtek protocol support enables Bluetooth HCI over 3-Wire
+	  serial port interface for Realtek Bluetooth controllers.
+
+	  Say Y here to compile support for Realtek protocol.
+
+config BT_HCIUART_QCA
+	bool "Qualcomm Atheros protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	select BT_QCA
+	help
+	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
+	  over serial port interface(H4) between controller and host.
+	  This protocol is required for UART clock control for QCA Bluetooth
+	  devices.
+
+	  Say Y here to compile support for QCA protocol.
+
+config BT_HCIUART_AG6XX
+	bool "Intel AG6XX protocol support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	select BT_INTEL
+	help
+	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial
+	  port interface for Intel ibt 2.1 Bluetooth controllers.
+
+	  Say Y here to compile support for Intel AG6XX protocol.
+
+config BT_HCIUART_MRVL
+	bool "Marvell protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	help
+	  Marvell is serial protocol for communication between Bluetooth
+	  device and host. This protocol is required for most Marvell Bluetooth
+	  devices with UART interface.
+
+	  Say Y here to compile support for HCI MRVL protocol.
+
+config BT_HCIUART_AML
+	bool "Amlogic protocol support"
+	depends on BT_HCIUART
+	depends on BT_HCIUART_SERDEV
+	select BT_HCIUART_H4
+	select FW_LOADER
+	help
+	  The Amlogic protocol support enables Bluetooth HCI over serial
+	  port interface for Amlogic Bluetooth controllers.
+
+	  Say Y here to compile support for HCI AML protocol.
+
+config BT_HCIBCM203X
+	tristate "HCI BCM203x USB driver"
+	depends on USB
+	select FW_LOADER
+	help
+	  Bluetooth HCI BCM203x USB driver.
+	  This driver provides the firmware loading mechanism for the Broadcom
+	  Blutonium based devices.
+
+	  Say Y here to compile support for HCI BCM203x devices into the
+	  kernel or say M to compile it as module (bcm203x).
+
+
+config BT_HCIBCM4377
+	tristate "HCI BCM4377/4378/4387/4388 PCIe driver"
+	depends on PCI
+	select FW_LOADER
+	help
+	  Support for Broadcom BCM4377/4378/4387/4388 Bluetooth chipsets
+	  attached via PCIe. These are usually found in Apple machines.
+
+	  Say Y here to compile support for HCI BCM4377 family devices into the
+	  kernel or say M to compile it as module (hci_bcm4377).
+
+config BT_HCIBPA10X
+	tristate "HCI BPA10x USB driver"
+	depends on BT_HCIUART
+	depends on USB
+	select BT_HCIUART_H4
+	help
+	  Bluetooth HCI BPA10x USB driver.
+	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
+	  sniffer devices.
+
+	  Say Y here to compile support for HCI BPA10x devices into the
+	  kernel or say M to compile it as module (bpa10x).
+
+config BT_HCIBFUSB
+	tristate "HCI BlueFRITZ! USB driver"
+	depends on USB
+	select FW_LOADER
+	help
+	  Bluetooth HCI BlueFRITZ! USB driver.
+	  This driver provides support for Bluetooth USB devices with AVM
+	  interface:
+	     AVM BlueFRITZ! USB
+
+	  Say Y here to compile support for HCI BFUSB devices into the
+	  kernel or say M to compile it as module (bfusb).
+
+config BT_HCIVHCI
+	tristate "HCI VHCI (Virtual HCI device) driver"
+	select WANT_DEV_COREDUMP
+	help
+	  Bluetooth Virtual HCI device driver.
+	  This driver is required if you want to use HCI Emulation software.
+
+	  Say Y here to compile support for virtual HCI devices into the
+	  kernel or say M to compile it as module (hci_vhci).
+
+config BT_MRVL
+	tristate "Marvell Bluetooth driver support"
+	help
+	  The core driver to support Marvell Bluetooth devices.
+
+	  This driver is required if you want to support
+	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
+
+	  Say Y here to compile Marvell Bluetooth driver
+	  into the kernel or say M to compile it as module.
+
+config BT_MRVL_SDIO
+	tristate "Marvell BT-over-SDIO driver"
+	depends on BT_MRVL && MMC
+	select FW_LOADER
+	select WANT_DEV_COREDUMP
+	help
+	  The driver for Marvell Bluetooth chipsets with SDIO interface.
+
+	  This driver is required if you want to use Marvell Bluetooth
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
+	  chipsets are supported.
+
+	  Say Y here to compile support for Marvell BT-over-SDIO driver
+	  into the kernel or say M to compile it as module.
+
+config BT_ATH3K
+	tristate "Atheros firmware download driver"
+	depends on BT_HCIBTUSB
+	select FW_LOADER
+	help
+	  Bluetooth firmware download driver.
+	  This driver loads the firmware into the Atheros Bluetooth
+	  chipset.
+
+	  Say Y here to compile support for "Atheros firmware download driver"
+	  into the kernel or say M to compile it as module (ath3k).
+
+config BT_MTKSDIO
+	tristate "MediaTek HCI SDIO driver"
+	depends on MMC
+	depends on USB || !BT_HCIBTUSB_MTK
+	select BT_MTK
+	help
+	  MediaTek Bluetooth HCI SDIO driver.
+	  This driver is required if you want to use MediaTek Bluetooth
+	  with SDIO interface.
+
+	  Say Y here to compile support for MediaTek Bluetooth SDIO devices
+	  into the kernel or say M to compile it as module (btmtksdio).
+
+config BT_MTKUART
+	tristate "MediaTek HCI UART driver"
+	depends on BT_HCIUART
+	depends on SERIAL_DEV_BUS
+	depends on USB || !BT_HCIBTUSB_MTK
+	select BT_HCIUART_H4
+	select BT_MTK
+	help
+	  MediaTek Bluetooth HCI UART driver.
+	  This driver is required if you want to use MediaTek Bluetooth
+	  with serial interface.
+
+	  Say Y here to compile support for MediaTek Bluetooth UART devices
+	  into the kernel or say M to compile it as module (btmtkuart).
+
+config BT_QCOMSMD
+	tristate "Qualcomm SMD based HCI support"
+	depends on RPMSG || (COMPILE_TEST && RPMSG=n)
+	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
+	select BT_QCA
+	help
+	  Qualcomm SMD based HCI driver.
+	  This driver is used to bridge HCI data onto the shared memory
+	  channels to the WCNSS core.
+
+	  Say Y here to compile support for HCI over Qualcomm SMD into the
+	  kernel or say M to compile as a module.
+
+config BT_HCIRSI
+	tristate
+	help
+	  Redpine BT driver.
+	  This driver handles BT traffic from upper layers and pass
+	  to the RSI_91x coex module for further scheduling to device
+
+	  Say Y here to compile support for HCI over Redpine into the
+	  kernel or say M to compile as a module.
+
+config BT_VIRTIO
+	tristate "Virtio Bluetooth driver"
+	depends on VIRTIO
+	help
+	  Virtio Bluetooth support driver.
+	  This driver supports Virtio Bluetooth devices.
+
+	  Say Y here to compile support for HCI over Virtio into the
+	  kernel or say M to compile as a module.
+
+config BT_NXPUART
+	tristate "NXP protocol support"
+	depends on BT_HCIUART
+	depends on SERIAL_DEV_BUS
+	select BT_HCIUART_H4
+	select CRC32
+	select CRC8
+	help
+	  NXP is serial driver required for NXP Bluetooth
+	  devices with UART interface.
+
+	  Say Y here to compile support for NXP Bluetooth UART device into
+	  the kernel, or say M here to compile as a module (btnxpuart).
+
+config BT_INTEL_PCIE
+	tristate "Intel HCI PCIe driver"
+	depends on PCI && ACPI
+	select BT_INTEL
+	select FW_LOADER
+	help
+	  Intel Bluetooth transport driver for PCIe.
+	  This driver is required if you want to use Intel Bluetooth device
+	  with PCIe interface.
+
+	  Say Y here to compiler support for Intel Bluetooth PCIe device into
+	  the kernel or say M to compile it as module (btintel_pcie)
+endmenu