KVM: SEV: Do cache maintenance on the source VM during intra-host migrationgrafted

Manually perform cache maintenance on the source VM during intra-host
migration to ensure no stale data is left in CPU caches after the VM is
destroyed.  Because the source VM is "converted" to a non-SEV VM, KVM's
memory reclaim flows won't trigger cache maintenance, e.g. when all guest
memory is reclaimed in response to detaching from the mmu_notifier.

Note, relying on the destination VM to do cache maintenance isn't an option
as KVM doesn't require identical guest memory configurations, i.e. the
source VM may have access to memory that the destination VM does not.
Enforcing equivalent memory configurations is infeasible, as it would
require a *deep* comparison of memslots, e.g. to verify that not only are
the memslot identical, but what the memslots point at is also identical.

Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration")
Cc: stable@vger.kernel.org
Reported-by: Stefan Teodorescu <fane@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260923163721.1584779-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 243 insertions, 0 deletions

diff --git a/drivers/block/swim_asm.S b/drivers/block/swim_asm.S
new file mode 100644
index 000000000..3d7a2d875
--- /dev/null
+++ b/drivers/block/swim_asm.S
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * low-level functions for the SWIM floppy controller
+ *
+ * needs assembly language because is very timing dependent
+ * this controller exists only on macintosh 680x0 based
+ *
+ * Copyright (C) 2004,2008 Laurent Vivier <Laurent@lvivier.info>
+ *
+ * based on Alastair Bridgewater SWIM analysis, 2001
+ * based on netBSD IWM driver (c) 1997, 1998 Hauke Fath.
+ *
+ * 2004-08-21 (lv) - Initial implementation
+ * 2008-11-05 (lv) - add get_swim_mode
+ */
+
+	.equ	write_data,	0x0000
+	.equ	write_mark,	0x0200
+	.equ	write_CRC,	0x0400
+	.equ	write_parameter,0x0600
+	.equ	write_phase,	0x0800
+	.equ	write_setup,	0x0a00
+	.equ	write_mode0,	0x0c00
+	.equ	write_mode1,	0x0e00
+	.equ	read_data,	0x1000
+	.equ	read_mark,	0x1200
+	.equ	read_error,	0x1400
+	.equ	read_parameter,	0x1600
+	.equ	read_phase,	0x1800
+	.equ	read_setup,	0x1a00
+	.equ	read_status,	0x1c00
+	.equ	read_handshake,	0x1e00
+
+	.equ	o_side, 0
+	.equ	o_track, 1
+	.equ	o_sector, 2
+	.equ	o_size, 3
+	.equ	o_crc0, 4
+	.equ	o_crc1, 5
+
+	.equ	seek_time, 30000
+	.equ	max_retry, 40
+	.equ	sector_size, 512
+
+	.global swim_read_sector_header
+swim_read_sector_header:
+	link	%a6, #0
+	moveml	%d1-%d5/%a0-%a4,%sp@-
+	movel	%a6@(0x0c), %a4
+	bsr	mfm_read_addrmark
+	moveml	%sp@+, %d1-%d5/%a0-%a4
+	unlk	%a6
+	rts
+
+sector_address_mark:
+	.byte	0xa1, 0xa1, 0xa1, 0xfe
+sector_data_mark:
+	.byte	0xa1, 0xa1, 0xa1, 0xfb
+
+mfm_read_addrmark:
+	movel	%a6@(0x08), %a3
+	lea	%a3@(read_handshake), %a2
+	lea	%a3@(read_mark), %a3
+	moveq	#-1, %d0
+	movew	#seek_time, %d2
+
+wait_header_init:
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveb	#0x01, %a3@(write_mode1 - read_mark)
+	moveb	#0x01, %a3@(write_mode0 - read_mark)
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x08, %a3@(write_mode1 - read_mark)
+
+	lea	sector_address_mark, %a0
+	moveq	#3, %d1
+
+wait_addr_mark_byte:
+
+	tstb	%a2@
+	dbmi	%d2, wait_addr_mark_byte
+	bpl	header_exit
+
+	moveb	%a3@, %d3
+	cmpb	%a0@+, %d3
+	dbne	%d1, wait_addr_mark_byte
+	bne	wait_header_init
+
+	moveq	#max_retry, %d2
+
+amark0:	tstb	%a2@
+	dbmi	%d2, amark0
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_track)
+
+	moveq	#max_retry, %d2
+
+amark1:	tstb	%a2@
+	dbmi	%d2, amark1
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_side)
+
+	moveq	#max_retry, %d2
+
+amark2:	tstb	%a2@
+	dbmi	%d2, amark2
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_sector)
+
+	moveq	#max_retry, %d2
+
+amark3:	tstb	%a2@
+	dbmi	%d2, amark3
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_size)
+
+	moveq	#max_retry, %d2
+
+crc0:	tstb	%a2@
+	dbmi	%d2, crc0
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_crc0)
+
+	moveq	#max_retry, %d2
+
+crc1:	tstb	%a2@
+	dbmi	%d2, crc1
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_crc1)
+
+	tstb	%a3@(read_error - read_mark)
+
+header_exit:
+	moveq	#0, %d0
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	rts
+signal_nonyb:
+	moveq	#-1, %d0
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	rts
+
+	.global swim_read_sector_data
+swim_read_sector_data:
+	link	%a6, #0
+	moveml	%d1-%d5/%a0-%a5,%sp@-
+	movel	%a6@(0x0c), %a4
+	bsr	mfm_read_data
+	moveml	%sp@+, %d1-%d5/%a0-%a5
+	unlk	%a6
+	rts
+
+mfm_read_data:
+	movel	%a6@(0x08), %a3
+	lea	%a3@(read_handshake), %a2
+	lea	%a3@(read_data), %a5
+	lea	%a3@(read_mark), %a3
+	movew	#seek_time, %d2
+
+wait_data_init:
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveb	#0x01, %a3@(write_mode1 - read_mark)
+	moveb	#0x01, %a3@(write_mode0 - read_mark)
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x08, %a3@(write_mode1 - read_mark)
+
+	lea	sector_data_mark, %a0
+	moveq	#3, %d1
+
+	/* wait data address mark */
+
+wait_data_mark_byte:
+
+	tstb	%a2@
+	dbmi	%d2, wait_data_mark_byte
+	bpl	data_exit
+
+	moveb	%a3@, %d3
+	cmpb	%a0@+, %d3
+	dbne	%d1, wait_data_mark_byte
+	bne	wait_data_init
+
+	/* read data */
+
+	tstb	%a3@(read_error - read_mark)
+
+	movel	#sector_size-1, %d4		/* sector size */
+read_new_data:
+	movew	#max_retry, %d2
+read_data_loop:
+	moveb	%a2@, %d5
+	andb	#0xc0, %d5
+	dbne	%d2, read_data_loop
+	beq	data_exit
+	moveb	%a5@, %a4@+
+	andb	#0x40, %d5
+	dbne	%d4, read_new_data
+	beq	exit_loop
+	moveb	%a5@, %a4@+
+	dbra	%d4, read_new_data
+exit_loop:
+
+	/* read CRC */
+
+	movew	#max_retry, %d2
+data_crc0:
+
+	tstb	%a2@
+	dbmi	%d2, data_crc0
+	bpl	data_exit
+
+	moveb	%a3@, %d5
+
+	moveq	#max_retry, %d2
+
+data_crc1:
+
+	tstb	%a2@
+	dbmi	%d2, data_crc1
+	bpl	data_exit
+
+	moveb	%a3@, %d5
+
+	tstb	%a3@(read_error - read_mark)
+
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+
+	/* return number of bytes read */
+
+	movel	#sector_size, %d0
+	addw	#1, %d4
+	subl	%d4, %d0
+	rts
+data_exit:
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveq	#-1, %d0
+	rts