kbuild: rust: keep Rust objects out of Clang LTO with inline helpersgrafted

Under `CONFIG_LTO_CLANG` + `CONFIG_RUST_INLINE_HELPERS`, one may hit
`objtool` errors such as:

    vmlinux.o: error: objtool: _R..._3Gsp4boot+0xd6a:
    can't find jump dest instruction at .text._R..._3Gsp4boot+0x1dfd

The reason is that in such builds, the Clang invocation that compiles
the combined Rust plus helpers bitcode emits LLVM bitcode (again) --
the final code generation happens in the linker's LTO step, which the
`-mllvm` trap options passed to Clang do not reach.

This, in turn, means that unreachable traps are missing, and the
impossible paths do not merely fallthrough to the next symbol, but past
the end of their own section, since LTO builds place each function in
its own section.

Thus filter `CC_FLAGS_LTO` out of the Clang invocation, so that it always
emits machine code directly, with the traps in place.

Assisted-by: LLM
Cc: Gary Guo <gary@garyguo.net>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 3a2486cc1da5 ("kbuild: rust: provide an option to inline C helpers into Rust")
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260816133233.197500-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

1 files changed, 243 insertions, 0 deletions

diff --git a/drivers/block/swim_asm.S b/drivers/block/swim_asm.S
new file mode 100644
index 000000000..3d7a2d875
--- /dev/null
+++ b/drivers/block/swim_asm.S
@@ -0,0 +1,243 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * low-level functions for the SWIM floppy controller
+ *
+ * needs assembly language because is very timing dependent
+ * this controller exists only on macintosh 680x0 based
+ *
+ * Copyright (C) 2004,2008 Laurent Vivier <Laurent@lvivier.info>
+ *
+ * based on Alastair Bridgewater SWIM analysis, 2001
+ * based on netBSD IWM driver (c) 1997, 1998 Hauke Fath.
+ *
+ * 2004-08-21 (lv) - Initial implementation
+ * 2008-11-05 (lv) - add get_swim_mode
+ */
+
+	.equ	write_data,	0x0000
+	.equ	write_mark,	0x0200
+	.equ	write_CRC,	0x0400
+	.equ	write_parameter,0x0600
+	.equ	write_phase,	0x0800
+	.equ	write_setup,	0x0a00
+	.equ	write_mode0,	0x0c00
+	.equ	write_mode1,	0x0e00
+	.equ	read_data,	0x1000
+	.equ	read_mark,	0x1200
+	.equ	read_error,	0x1400
+	.equ	read_parameter,	0x1600
+	.equ	read_phase,	0x1800
+	.equ	read_setup,	0x1a00
+	.equ	read_status,	0x1c00
+	.equ	read_handshake,	0x1e00
+
+	.equ	o_side, 0
+	.equ	o_track, 1
+	.equ	o_sector, 2
+	.equ	o_size, 3
+	.equ	o_crc0, 4
+	.equ	o_crc1, 5
+
+	.equ	seek_time, 30000
+	.equ	max_retry, 40
+	.equ	sector_size, 512
+
+	.global swim_read_sector_header
+swim_read_sector_header:
+	link	%a6, #0
+	moveml	%d1-%d5/%a0-%a4,%sp@-
+	movel	%a6@(0x0c), %a4
+	bsr	mfm_read_addrmark
+	moveml	%sp@+, %d1-%d5/%a0-%a4
+	unlk	%a6
+	rts
+
+sector_address_mark:
+	.byte	0xa1, 0xa1, 0xa1, 0xfe
+sector_data_mark:
+	.byte	0xa1, 0xa1, 0xa1, 0xfb
+
+mfm_read_addrmark:
+	movel	%a6@(0x08), %a3
+	lea	%a3@(read_handshake), %a2
+	lea	%a3@(read_mark), %a3
+	moveq	#-1, %d0
+	movew	#seek_time, %d2
+
+wait_header_init:
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveb	#0x01, %a3@(write_mode1 - read_mark)
+	moveb	#0x01, %a3@(write_mode0 - read_mark)
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x08, %a3@(write_mode1 - read_mark)
+
+	lea	sector_address_mark, %a0
+	moveq	#3, %d1
+
+wait_addr_mark_byte:
+
+	tstb	%a2@
+	dbmi	%d2, wait_addr_mark_byte
+	bpl	header_exit
+
+	moveb	%a3@, %d3
+	cmpb	%a0@+, %d3
+	dbne	%d1, wait_addr_mark_byte
+	bne	wait_header_init
+
+	moveq	#max_retry, %d2
+
+amark0:	tstb	%a2@
+	dbmi	%d2, amark0
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_track)
+
+	moveq	#max_retry, %d2
+
+amark1:	tstb	%a2@
+	dbmi	%d2, amark1
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_side)
+
+	moveq	#max_retry, %d2
+
+amark2:	tstb	%a2@
+	dbmi	%d2, amark2
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_sector)
+
+	moveq	#max_retry, %d2
+
+amark3:	tstb	%a2@
+	dbmi	%d2, amark3
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_size)
+
+	moveq	#max_retry, %d2
+
+crc0:	tstb	%a2@
+	dbmi	%d2, crc0
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_crc0)
+
+	moveq	#max_retry, %d2
+
+crc1:	tstb	%a2@
+	dbmi	%d2, crc1
+	bpl	signal_nonyb
+
+	moveb	%a3@, %a4@(o_crc1)
+
+	tstb	%a3@(read_error - read_mark)
+
+header_exit:
+	moveq	#0, %d0
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	rts
+signal_nonyb:
+	moveq	#-1, %d0
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	rts
+
+	.global swim_read_sector_data
+swim_read_sector_data:
+	link	%a6, #0
+	moveml	%d1-%d5/%a0-%a5,%sp@-
+	movel	%a6@(0x0c), %a4
+	bsr	mfm_read_data
+	moveml	%sp@+, %d1-%d5/%a0-%a5
+	unlk	%a6
+	rts
+
+mfm_read_data:
+	movel	%a6@(0x08), %a3
+	lea	%a3@(read_handshake), %a2
+	lea	%a3@(read_data), %a5
+	lea	%a3@(read_mark), %a3
+	movew	#seek_time, %d2
+
+wait_data_init:
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveb	#0x01, %a3@(write_mode1 - read_mark)
+	moveb	#0x01, %a3@(write_mode0 - read_mark)
+	tstb	%a3@(read_error - read_mark)
+	moveb	#0x08, %a3@(write_mode1 - read_mark)
+
+	lea	sector_data_mark, %a0
+	moveq	#3, %d1
+
+	/* wait data address mark */
+
+wait_data_mark_byte:
+
+	tstb	%a2@
+	dbmi	%d2, wait_data_mark_byte
+	bpl	data_exit
+
+	moveb	%a3@, %d3
+	cmpb	%a0@+, %d3
+	dbne	%d1, wait_data_mark_byte
+	bne	wait_data_init
+
+	/* read data */
+
+	tstb	%a3@(read_error - read_mark)
+
+	movel	#sector_size-1, %d4		/* sector size */
+read_new_data:
+	movew	#max_retry, %d2
+read_data_loop:
+	moveb	%a2@, %d5
+	andb	#0xc0, %d5
+	dbne	%d2, read_data_loop
+	beq	data_exit
+	moveb	%a5@, %a4@+
+	andb	#0x40, %d5
+	dbne	%d4, read_new_data
+	beq	exit_loop
+	moveb	%a5@, %a4@+
+	dbra	%d4, read_new_data
+exit_loop:
+
+	/* read CRC */
+
+	movew	#max_retry, %d2
+data_crc0:
+
+	tstb	%a2@
+	dbmi	%d2, data_crc0
+	bpl	data_exit
+
+	moveb	%a3@, %d5
+
+	moveq	#max_retry, %d2
+
+data_crc1:
+
+	tstb	%a2@
+	dbmi	%d2, data_crc1
+	bpl	data_exit
+
+	moveb	%a3@, %d5
+
+	tstb	%a3@(read_error - read_mark)
+
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+
+	/* return number of bytes read */
+
+	movel	#sector_size, %d0
+	addw	#1, %d4
+	subl	%d4, %d0
+	rts
+data_exit:
+	moveb	#0x18, %a3@(write_mode0 - read_mark)
+	moveq	#-1, %d0
+	rts