Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediagrafted

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

1 files changed, 118 insertions, 0 deletions

diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 000000000..b9558ff20
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0
+config BCMA_POSSIBLE
+	bool
+	depends on HAS_IOMEM && HAS_DMA
+	default y
+
+menuconfig BCMA
+	tristate "Broadcom specific AMBA"
+	depends on BCMA_POSSIBLE
+	help
+	  Bus driver for Broadcom specific Advanced Microcontroller Bus
+	  Architecture.
+
+if BCMA
+
+# Support for Block-I/O. SELECT this from the driver that needs it.
+config BCMA_BLOCKIO
+	bool
+
+config BCMA_HOST_PCI_POSSIBLE
+	bool
+	depends on PCI = y
+	default y
+
+config BCMA_HOST_PCI
+	bool "Support for BCMA on PCI-host bus"
+	depends on BCMA_HOST_PCI_POSSIBLE
+	select BCMA_DRIVER_PCI
+	default y
+
+config BCMA_HOST_SOC
+	bool "Support for BCMA in a SoC"
+	depends on HAS_IOMEM
+	help
+	  Host interface for a Broadcom AIX bus directly mapped into
+	  the memory. This only works with the Broadcom SoCs from the
+	  BCM47XX line.
+
+	  If unsure, say N
+
+config BCMA_DRIVER_PCI
+	bool "BCMA Broadcom PCI core driver"
+	depends on PCI
+	default y
+	help
+	  BCMA bus may have many versions of PCIe core. This driver
+	  supports:
+	  1) PCIe core working in clientmode
+	  2) PCIe Gen 2 clientmode core
+
+	  In general PCIe (Gen 2) clientmode core is required on PCIe
+	  hosted buses. It's responsible for initialization and basic
+	  hardware management.
+	  This driver is also prerequisite for a hostmode PCIe core
+	  support.
+
+config BCMA_DRIVER_PCI_HOSTMODE
+	bool "Driver for PCI core working in hostmode"
+	depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY && BCMA = y
+	help
+	  PCI core hostmode operation (external PCI bus).
+
+config BCMA_DRIVER_MIPS
+	bool "BCMA Broadcom MIPS core driver"
+	depends on MIPS || COMPILE_TEST
+	help
+	  Driver for the Broadcom MIPS core attached to Broadcom specific
+	  Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
+config BCMA_PFLASH
+	bool
+	depends on BCMA_DRIVER_MIPS
+	default y
+
+config BCMA_SFLASH
+	bool "ChipCommon-attached serial flash support"
+	depends on BCMA_HOST_SOC
+	default y
+	help
+	  Some cheap devices have serial flash connected to the ChipCommon
+	  instead of independent SPI controller. It requires using a separated
+	  driver that implements ChipCommon specific interface communication.
+
+	  Enabling this symbol will let bcma recognize serial flash and register
+	  it as platform device.
+
+config BCMA_NFLASH
+	bool
+	depends on BCMA_DRIVER_MIPS
+	default y
+
+config BCMA_DRIVER_GMAC_CMN
+	bool "BCMA Broadcom GBIT MAC COMMON core driver"
+	help
+	  Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
+	  specific Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
+config BCMA_DRIVER_GPIO
+	bool "BCMA GPIO driver"
+	depends on GPIOLIB
+	select GPIOLIB_IRQCHIP if BCMA_HOST_SOC
+	help
+	  Driver to provide access to the GPIO pins of the bcma bus.
+
+	  If unsure, say N
+
+config BCMA_DEBUG
+	bool "BCMA debugging"
+	help
+	  This turns on additional debugging messages.
+
+	  If unsure, say N
+
+endif # BCMA