drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 129 insertions, 0 deletions

diff --git a/drivers/base/regmap/regmap-sccb.c b/drivers/base/regmap/regmap-sccb.c
new file mode 100644
index 000000000..12bbbb03e
--- /dev/null
+++ b/drivers/base/regmap/regmap-sccb.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+// Register map access API - SCCB support
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "internal.h"
+
+/**
+ * sccb_is_available - Check if the adapter supports SCCB protocol
+ * @adap: I2C adapter
+ *
+ * Return true if the I2C adapter is capable of using SCCB helper functions,
+ * false otherwise.
+ */
+static bool sccb_is_available(struct i2c_adapter *adap)
+{
+	u32 needed_funcs = I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+
+	/*
+	 * If we ever want support for hardware doing SCCB natively, we will
+	 * introduce a sccb_xfer() callback to struct i2c_algorithm and check
+	 * for it here.
+	 */
+
+	return (i2c_get_functionality(adap) & needed_funcs) == needed_funcs;
+}
+
+/**
+ * regmap_sccb_read - Read data from SCCB slave device
+ * @context: Device that will be interacted with
+ * @reg: Register to be read from
+ * @val: Pointer to store read value
+ *
+ * This executes the 2-phase write transmission cycle that is followed by a
+ * 2-phase read transmission cycle, returning negative errno else zero on
+ * success.
+ */
+static int regmap_sccb_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	int ret;
+	union i2c_smbus_data data;
+
+	i2c_lock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
+
+	ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
+			       I2C_SMBUS_WRITE, reg, I2C_SMBUS_BYTE, NULL);
+	if (ret < 0)
+		goto out;
+
+	ret = __i2c_smbus_xfer(i2c->adapter, i2c->addr, i2c->flags,
+			       I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &data);
+	if (ret < 0)
+		goto out;
+
+	*val = data.byte;
+out:
+	i2c_unlock_bus(i2c->adapter, I2C_LOCK_SEGMENT);
+
+	return ret;
+}
+
+/**
+ * regmap_sccb_write - Write data to SCCB slave device
+ * @context: Device that will be interacted with
+ * @reg: Register to write to
+ * @val: Value to be written
+ *
+ * This executes the SCCB 3-phase write transmission cycle, returning negative
+ * errno else zero on success.
+ */
+static int regmap_sccb_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+
+	return i2c_smbus_write_byte_data(i2c, reg, val);
+}
+
+static const struct regmap_bus regmap_sccb_bus = {
+	.reg_write = regmap_sccb_write,
+	.reg_read = regmap_sccb_read,
+};
+
+static const struct regmap_bus *regmap_get_sccb_bus(struct i2c_client *i2c,
+					const struct regmap_config *config)
+{
+	if (config->val_bits == 8 && config->reg_bits == 8 &&
+			sccb_is_available(i2c->adapter))
+		return &regmap_sccb_bus;
+
+	return ERR_PTR(-ENOTSUPP);
+}
+
+struct regmap *__regmap_init_sccb(struct i2c_client *i2c,
+				  const struct regmap_config *config,
+				  struct lock_class_key *lock_key,
+				  const char *lock_name)
+{
+	const struct regmap_bus *bus = regmap_get_sccb_bus(i2c, config);
+
+	if (IS_ERR(bus))
+		return ERR_CAST(bus);
+
+	return __regmap_init(&i2c->dev, bus, &i2c->dev, config,
+			     lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__regmap_init_sccb);
+
+struct regmap *__devm_regmap_init_sccb(struct i2c_client *i2c,
+				       const struct regmap_config *config,
+				       struct lock_class_key *lock_key,
+				       const char *lock_name)
+{
+	const struct regmap_bus *bus = regmap_get_sccb_bus(i2c, config);
+
+	if (IS_ERR(bus))
+		return ERR_CAST(bus);
+
+	return __devm_regmap_init(&i2c->dev, bus, &i2c->dev, config,
+				  lock_key, lock_name);
+}
+EXPORT_SYMBOL_GPL(__devm_regmap_init_sccb);
+
+MODULE_DESCRIPTION("Register map access API - SCCB support");
+MODULE_LICENSE("GPL v2");