drm/amd/display: Try RGB before YCbCr 4:4:4 in stream validationgrafted

amdgpu_dm_create_validate_stream_for_sink() walks encoding_order[] and
uses the first encoding that validates. YCbCr 4:4:4 is listed before
RGB, so an HDMI sink that advertises 4:4:4 gets YCbCr 4:4:4 whenever the
"color format" property is left at AUTO, even though RGB fits the same
link.

That contradicts the documented AUTO behaviour for HDMI in enum
drm_connector_color_format (RGB, falling back to YCbCr 4:2:0 only when
the bandwidth is not available or the mode is 4:2:0-only), which the
amdgpu implementation of the property also describes. It also leaves
the "Broadcast RGB" property without effect on such sinks, since the
quantization range it selects only applies to RGB output.

Try RGB first. The mask still holds every encoding the sink supports,
so a mode that cannot carry RGB falls back exactly as before.

For reference, v7.2 picked RGB here unless YCbCr 4:4:4 was forced
through debugfs, while earlier kernels picked YCbCr 4:4:4 for any HDMI
sink that advertised it.

Fixes: 0b0ff65d3ca1 ("drm/amd/display: Refactor stream validation")
Suggested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Assisted-by: Claude Code:claude-fable-5-1
Signed-off-by: Adrian Betschart <adrian.betschart@cinemaone.ch>
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Adolfo Rodrigues <adolfotregosa@gmail.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7de432bc753133764dc40d37f9388da56de251e7)

1 files changed, 204 insertions, 0 deletions

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
new file mode 100644
index 000000000..5d9c39081
--- /dev/null
+++ b/drivers/base/driver.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * driver.c - centralized device driver management
+ *
+ * Copyright (c) 2002-3 Patrick Mochel
+ * Copyright (c) 2002-3 Open Source Development Labs
+ * Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
+ * Copyright (c) 2007 Novell Inc.
+ */
+
+#include <linux/device/driver.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include "base.h"
+
+static struct device *next_device(struct klist_iter *i)
+{
+	struct klist_node *n = klist_next(i);
+	struct device *dev = NULL;
+	struct device_private *dev_prv;
+
+	if (n) {
+		dev_prv = to_device_private_driver(n);
+		dev = dev_prv->device;
+	}
+	return dev;
+}
+
+/**
+ * driver_for_each_device - Iterator for devices bound to a driver.
+ * @drv: Driver we're iterating.
+ * @start: Device to begin with
+ * @data: Data to pass to the callback.
+ * @fn: Function to call for each device.
+ *
+ * Iterate over the @drv's list of devices calling @fn for each one.
+ */
+int driver_for_each_device(struct device_driver *drv, struct device *start,
+			   void *data, device_iter_t fn)
+{
+	struct klist_iter i;
+	struct device *dev;
+	int error = 0;
+
+	if (!drv)
+		return -EINVAL;
+
+	klist_iter_init_node(&drv->p->klist_devices, &i,
+			     start ? &start->p->knode_driver : NULL);
+	while (!error && (dev = next_device(&i)))
+		error = fn(dev, data);
+	klist_iter_exit(&i);
+	return error;
+}
+EXPORT_SYMBOL_GPL(driver_for_each_device);
+
+/**
+ * driver_find_device - device iterator for locating a particular device.
+ * @drv: The device's driver
+ * @start: Device to begin with
+ * @data: Data to pass to match function
+ * @match: Callback function to check device
+ *
+ * This is similar to the driver_for_each_device() function above, but
+ * it returns a reference to a device that is 'found' for later use, as
+ * determined by the @match callback.
+ *
+ * The callback should return 0 if the device doesn't match and non-zero
+ * if it does.  If the callback returns non-zero, this function will
+ * return to the caller and not iterate over any more devices.
+ */
+struct device *driver_find_device(const struct device_driver *drv,
+				  struct device *start, const void *data,
+				  device_match_t match)
+{
+	struct klist_iter i;
+	struct device *dev;
+
+	if (!drv || !drv->p)
+		return NULL;
+
+	klist_iter_init_node(&drv->p->klist_devices, &i,
+			     (start ? &start->p->knode_driver : NULL));
+	while ((dev = next_device(&i))) {
+		if (match(dev, data)) {
+			get_device(dev);
+			break;
+		}
+	}
+	klist_iter_exit(&i);
+	return dev;
+}
+EXPORT_SYMBOL_GPL(driver_find_device);
+
+/**
+ * driver_create_file - create sysfs file for driver.
+ * @drv: driver.
+ * @attr: driver attribute descriptor.
+ */
+int driver_create_file(const struct device_driver *drv,
+		       const struct driver_attribute *attr)
+{
+	int error;
+
+	if (drv)
+		error = sysfs_create_file(&drv->p->kobj, &attr->attr);
+	else
+		error = -EINVAL;
+	return error;
+}
+EXPORT_SYMBOL_GPL(driver_create_file);
+
+/**
+ * driver_remove_file - remove sysfs file for driver.
+ * @drv: driver.
+ * @attr: driver attribute descriptor.
+ */
+void driver_remove_file(const struct device_driver *drv,
+			const struct driver_attribute *attr)
+{
+	if (drv)
+		sysfs_remove_file(&drv->p->kobj, &attr->attr);
+}
+EXPORT_SYMBOL_GPL(driver_remove_file);
+
+int driver_add_groups(const struct device_driver *drv,
+		      const struct attribute_group *const *groups)
+{
+	return sysfs_create_groups(&drv->p->kobj, groups);
+}
+
+void driver_remove_groups(const struct device_driver *drv,
+			  const struct attribute_group *const *groups)
+{
+	sysfs_remove_groups(&drv->p->kobj, groups);
+}
+
+/**
+ * driver_register - register driver with bus
+ * @drv: driver to register
+ *
+ * We pass off most of the work to the bus_add_driver() call,
+ * since most of the things we have to do deal with the bus
+ * structures.
+ */
+int driver_register(struct device_driver *drv)
+{
+	int ret;
+	struct device_driver *other;
+
+	if (!bus_is_registered(drv->bus)) {
+		pr_err("Driver '%s' was unable to register with bus_type '%s' because the bus was not initialized.\n",
+			   drv->name, drv->bus->name);
+		return -EINVAL;
+	}
+
+	if ((drv->bus->probe && drv->probe) ||
+	    (drv->bus->remove && drv->remove) ||
+	    (drv->bus->shutdown && drv->shutdown))
+		pr_warn("Driver '%s' needs updating - please use "
+			"bus_type methods\n", drv->name);
+
+	other = driver_find(drv->name, drv->bus);
+	if (other) {
+		pr_err("Error: Driver '%s' is already registered, "
+			"aborting...\n", drv->name);
+		return -EBUSY;
+	}
+
+	ret = bus_add_driver(drv);
+	if (ret)
+		return ret;
+	ret = driver_add_groups(drv, drv->groups);
+	if (ret) {
+		bus_remove_driver(drv);
+		return ret;
+	}
+	kobject_uevent(&drv->p->kobj, KOBJ_ADD);
+	deferred_probe_extend_timeout();
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(driver_register);
+
+/**
+ * driver_unregister - remove driver from system.
+ * @drv: driver.
+ *
+ * Again, we pass off most of the work to the bus-level call.
+ */
+void driver_unregister(struct device_driver *drv)
+{
+	if (!drv || !drv->p) {
+		WARN(1, "Unexpected driver unregister!\n");
+		return;
+	}
+	driver_remove_groups(drv, drv->groups);
+	bus_remove_driver(drv);
+}
+EXPORT_SYMBOL_GPL(driver_unregister);