PCI: Add pci_irq_type() to query the allocated interrupt typegrafted

Add a helper that returns PCI_IRQ_MSIX, PCI_IRQ_MSI, or PCI_IRQ_INTX
based on the interrupt type the PCI core selected after
pci_alloc_irq_vectors().

Several drivers already open-code this check against pdev->msix_enabled
and pdev->msi_enabled, or even open code this helper [1].

A common helper avoids the duplication and keeps drivers from accessing
the bitfield directly (see also [2]).

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Link: https://elixir.bootlin.com/linux/v7.1/source/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c#L196 [1]
Inspired-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/all/DKKG2QM3YJYB.Z2H2B2UXJ75N@kernel.org/ [2]
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260813165234.620555-5-dakr@kernel.org
[ Add missing pci_irq_type() stub for CONFIG_PCI=n. ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>

1 files changed, 82 insertions, 0 deletions

diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
new file mode 100644
index 000000000..b79b7c99c
--- /dev/null
+++ b/drivers/acpi/reboot.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/reboot.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_PCI
+static void acpi_pci_reboot(struct acpi_generic_address *rr, u8 reset_value)
+{
+	unsigned int devfn;
+	struct pci_bus *bus0;
+
+	/* The reset register can only live on bus 0. */
+	bus0 = pci_find_bus(0, 0);
+	if (!bus0)
+		return;
+	/* Form PCI device/function pair. */
+	devfn = PCI_DEVFN((rr->address >> 32) & 0xffff,
+			  (rr->address >> 16) & 0xffff);
+	pr_debug("Resetting with ACPI PCI RESET_REG.\n");
+	/* Write the value that resets us. */
+	pci_bus_write_config_byte(bus0, devfn,
+			(rr->address & 0xffff), reset_value);
+}
+#else
+static inline void acpi_pci_reboot(struct acpi_generic_address *rr,
+				   u8 reset_value)
+{
+	pr_warn_once("PCI configuration space access is not supported\n");
+}
+#endif
+
+void acpi_reboot(void)
+{
+	struct acpi_generic_address *rr;
+	u8 reset_value;
+
+	if (acpi_disabled)
+		return;
+
+	rr = &acpi_gbl_FADT.reset_register;
+
+	/* ACPI reset register was only introduced with v2 of the FADT */
+
+	if (acpi_gbl_FADT.header.revision < 2)
+		return;
+
+	/* Is the reset register supported? The spec says we should be
+	 * checking the bit width and bit offset, but Windows ignores
+	 * these fields */
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER))
+		return;
+
+	reset_value = acpi_gbl_FADT.reset_value;
+
+	/* The reset register can only exist in I/O, Memory or PCI config space
+	 * on a device on bus 0. */
+	switch (rr->space_id) {
+	case ACPI_ADR_SPACE_PCI_CONFIG:
+		acpi_pci_reboot(rr, reset_value);
+		break;
+
+	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		pr_debug("ACPI MEMORY or I/O RESET_REG.\n");
+		acpi_reset();
+		break;
+	}
+
+	/*
+	 * Some platforms do not shut down immediately after writing to the
+	 * ACPI reset register, and this results in racing with the
+	 * subsequent reboot mechanism.
+	 *
+	 * The 15ms delay has been found to be long enough for the system
+	 * to reboot on the affected platforms.
+	 */
+	mdelay(15);
+}