Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 82 insertions, 0 deletions

diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c
new file mode 100644
index 000000000..b79b7c99c
--- /dev/null
+++ b/drivers/acpi/reboot.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "ACPI: " fmt
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <acpi/reboot.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_PCI
+static void acpi_pci_reboot(struct acpi_generic_address *rr, u8 reset_value)
+{
+	unsigned int devfn;
+	struct pci_bus *bus0;
+
+	/* The reset register can only live on bus 0. */
+	bus0 = pci_find_bus(0, 0);
+	if (!bus0)
+		return;
+	/* Form PCI device/function pair. */
+	devfn = PCI_DEVFN((rr->address >> 32) & 0xffff,
+			  (rr->address >> 16) & 0xffff);
+	pr_debug("Resetting with ACPI PCI RESET_REG.\n");
+	/* Write the value that resets us. */
+	pci_bus_write_config_byte(bus0, devfn,
+			(rr->address & 0xffff), reset_value);
+}
+#else
+static inline void acpi_pci_reboot(struct acpi_generic_address *rr,
+				   u8 reset_value)
+{
+	pr_warn_once("PCI configuration space access is not supported\n");
+}
+#endif
+
+void acpi_reboot(void)
+{
+	struct acpi_generic_address *rr;
+	u8 reset_value;
+
+	if (acpi_disabled)
+		return;
+
+	rr = &acpi_gbl_FADT.reset_register;
+
+	/* ACPI reset register was only introduced with v2 of the FADT */
+
+	if (acpi_gbl_FADT.header.revision < 2)
+		return;
+
+	/* Is the reset register supported? The spec says we should be
+	 * checking the bit width and bit offset, but Windows ignores
+	 * these fields */
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER))
+		return;
+
+	reset_value = acpi_gbl_FADT.reset_value;
+
+	/* The reset register can only exist in I/O, Memory or PCI config space
+	 * on a device on bus 0. */
+	switch (rr->space_id) {
+	case ACPI_ADR_SPACE_PCI_CONFIG:
+		acpi_pci_reboot(rr, reset_value);
+		break;
+
+	case ACPI_ADR_SPACE_SYSTEM_MEMORY:
+	case ACPI_ADR_SPACE_SYSTEM_IO:
+		pr_debug("ACPI MEMORY or I/O RESET_REG.\n");
+		acpi_reset();
+		break;
+	}
+
+	/*
+	 * Some platforms do not shut down immediately after writing to the
+	 * ACPI reset register, and this results in racing with the
+	 * subsequent reboot mechanism.
+	 *
+	 * The 15ms delay has been found to be long enough for the system
+	 * to reboot on the affected platforms.
+	 */
+	mdelay(15);
+}