iio: proximity: vl53l0x-i2c: claim direct mode for raw readsgrafted

vl53l0x_read_raw() starts a single-shot ranging measurement and reads
back the result. Once the triggered buffer is enabled the sensor runs in
continuous mode and its data-ready interrupt is routed to the trigger,
so a concurrent in_distance_raw read disturbs the streaming setup and
never gets its completion, returning -ETIMEDOUT.

The original submission claimed direct mode here, but it was dropped
during review because the driver had no buffer support at the time [1].
Continuous (buffered) mode was later added without restoring the
claim [2], reintroducing the conflict.

Reject direct reads while buffered capture is active by claiming direct
mode around the measurement, as the vl53l1x sibling already does.

Fixes: 762186c6e7b1 ("iio: proximity: vl53l0x-i2c: Added continuous mode support")
Link: https://lore.kernel.org/linux-iio/20180911160300.GA9212@himanshu-Vostro-3559/ [1]
Link: https://lore.kernel.org/linux-iio/20240909101508.263085-3-abhashkumarjha123@gmail.com/ [2]
Signed-off-by: Donggeun Yoo <donggeunyoo.kernel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>

1 files changed, 174 insertions, 0 deletions

diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c
new file mode 100644
index 000000000..5427e49e6
--- /dev/null
+++ b/drivers/acpi/apei/bert.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * APEI Boot Error Record Table (BERT) support
+ *
+ * Copyright 2011 Intel Corp.
+ *   Author: Huang Ying <ying.huang@intel.com>
+ *
+ * Under normal circumstances, when a hardware error occurs, the error
+ * handler receives control and processes the error. This gives OSPM a
+ * chance to process the error condition, report it, and optionally attempt
+ * recovery. In some cases, the system is unable to process an error.
+ * For example, system firmware or a management controller may choose to
+ * reset the system or the system might experience an uncontrolled crash
+ * or reset.The boot error source is used to report unhandled errors that
+ * occurred in a previous boot. This mechanism is described in the BERT
+ * table.
+ *
+ * For more information about BERT, please refer to ACPI Specification
+ * version 4.0, section 17.3.1
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/cper.h>
+#include <linux/io.h>
+
+#include "apei-internal.h"
+
+#undef pr_fmt
+#define pr_fmt(fmt) "BERT: " fmt
+
+#define ACPI_BERT_PRINT_MAX_RECORDS 5
+#define ACPI_BERT_PRINT_MAX_LEN 1024
+
+static int bert_disable __initdata;
+
+/*
+ * Print "all" the error records in the BERT table, but avoid huge spam to
+ * the console if the BIOS included oversize records, or too many records.
+ * Skipping some records here does not lose anything because the full
+ * data is available to user tools in:
+ *	/sys/firmware/acpi/tables/data/BERT
+ */
+static void __init bert_print_all(struct acpi_bert_region *region,
+				  unsigned int region_len)
+{
+	struct acpi_hest_generic_status *estatus =
+		(struct acpi_hest_generic_status *)region;
+	int remain = region_len;
+	int printed = 0, skipped = 0;
+	u32 estatus_len;
+
+	while (remain >= sizeof(struct acpi_bert_region)) {
+		estatus_len = cper_estatus_len(estatus);
+		if (remain < estatus_len) {
+			pr_err(FW_BUG "Truncated status block (length: %u).\n",
+			       estatus_len);
+			break;
+		}
+
+		/* No more error records. */
+		if (!estatus->block_status)
+			break;
+
+		if (cper_estatus_check(estatus)) {
+			pr_err(FW_BUG "Invalid error record.\n");
+			break;
+		}
+
+		if (estatus_len < ACPI_BERT_PRINT_MAX_LEN &&
+		    printed < ACPI_BERT_PRINT_MAX_RECORDS) {
+			pr_info_once("Error records from previous boot:\n");
+			cper_estatus_print(KERN_INFO HW_ERR, estatus);
+			printed++;
+		} else {
+			skipped++;
+		}
+
+		/*
+		 * Because the boot error source is "one-time polled" type,
+		 * clear Block Status of current Generic Error Status Block,
+		 * once it's printed.
+		 */
+		estatus->block_status = 0;
+
+		estatus = (void *)estatus + estatus_len;
+		remain -= estatus_len;
+	}
+
+	if (skipped)
+		pr_info(HW_ERR "Skipped %d error records\n", skipped);
+
+	if (printed + skipped)
+		pr_info("Total records found: %d\n", printed + skipped);
+}
+
+static int __init setup_bert_disable(char *str)
+{
+	bert_disable = 1;
+
+	return 1;
+}
+__setup("bert_disable", setup_bert_disable);
+
+static int __init bert_check_table(struct acpi_table_bert *bert_tab)
+{
+	if (bert_tab->header.length < sizeof(struct acpi_table_bert) ||
+	    bert_tab->region_length < sizeof(struct acpi_bert_region))
+		return -EINVAL;
+
+	return 0;
+}
+
+static int __init bert_init(void)
+{
+	struct apei_resources bert_resources;
+	struct acpi_bert_region *boot_error_region;
+	struct acpi_table_bert *bert_tab;
+	unsigned int region_len;
+	acpi_status status;
+	int rc = 0;
+
+	if (acpi_disabled)
+		return 0;
+
+	if (bert_disable) {
+		pr_info("Boot Error Record Table support is disabled.\n");
+		return 0;
+	}
+
+	status = acpi_get_table(ACPI_SIG_BERT, 0, (struct acpi_table_header **)&bert_tab);
+	if (status == AE_NOT_FOUND)
+		return 0;
+
+	if (ACPI_FAILURE(status)) {
+		pr_err("get table failed, %s.\n", acpi_format_exception(status));
+		return -EINVAL;
+	}
+
+	rc = bert_check_table(bert_tab);
+	if (rc) {
+		pr_err(FW_BUG "table invalid.\n");
+		goto out_put_bert_tab;
+	}
+
+	region_len = bert_tab->region_length;
+	apei_resources_init(&bert_resources);
+	rc = apei_resources_add(&bert_resources, bert_tab->address,
+				region_len, true);
+	if (rc)
+		goto out_put_bert_tab;
+	rc = apei_resources_request(&bert_resources, "APEI BERT");
+	if (rc)
+		goto out_fini;
+	boot_error_region = ioremap_cache(bert_tab->address, region_len);
+	if (boot_error_region) {
+		bert_print_all(boot_error_region, region_len);
+		iounmap(boot_error_region);
+	} else {
+		rc = -ENOMEM;
+	}
+
+	apei_resources_release(&bert_resources);
+out_fini:
+	apei_resources_fini(&bert_resources);
+out_put_bert_tab:
+	acpi_put_table((struct acpi_table_header *)bert_tab);
+
+	return rc;
+}
+
+late_initcall(bert_init);