Merge tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlgrafted

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use the non-blocking mux_state_try_select() in the generic MUX pin
     control back-end

   - Free pin maps on pinctrl_generic_to_map() failure in the core
     helpers

  New hardware pin control:

   - Qualcomm Maili TLMM SoC, PMG1110 PMIC, and Eliza LPASS LPI TLMM SoC
     (this is for the low power audio, LPASS = Low Power Audio SubSystem
     portions)

   - Upboard support on top of the Intel pin controller

   - Apple T6030 and T6031 support (just compatible strings)

   - Samsung Exynos 8855 SoC

   - Mediatek MT6858 SoC

   - Rockchip RK3308B and RV1106 SoCs

   - Airoha EN7523 and AN7563 SoCs

  Improvements:

   - Qualcomm TLMM GPIOs are unconditionally marked as wakeup capable

   - Qualcomm improvements on top of the Qualcomm PDC (power domain
     controller) irqchip improvements from tglx:s tree

   - Qualcomm IPQ806x and IPQ9650 non-urgent pin grop fixups

   - The NPCM8xx driver has been put into shape fixing many pin and
     group definitions

   - Some non-urgent Tegra 264 pin assignments are fixed up

   - Some non-urgent fixups to Airoha AN7581 and AN7583 registers and
     pin assignments, missing features etc"

* tag 'pinctrl-v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (130 commits)
  dt-bindings: pinctrl: Convert TI DA850 pupd to DT schema
  pinctrl: meson: sync some modify from A4
  pinctrl: meson: a4: Add input enable pin configuration
  pinctrl: realtek: rtd1625: remove unused group name spdif_sel
  pinctrl: realtek: rtd1625: fix base_bit for VE4 GPIO 13
  dt-bindings: pinctrl: microchip,pic32mzda-pinctrl: Convert to DT schema
  Revert "Merge branch 'ib-rsk7204' into devel"
  pinctrl: rockchip: Add RV1106 pinctrl support
  dt-bindings: pinctrl: rockchip: Add RV1106 compatible
  pinctrl: rockchip: Decode drive strength in the get function
  pinctrl: fix PINCTRL_GENERIC_MUX not always being selectable
  pinctrl: airoha: add support of an7563 SoC
  dt-bindings: pinctrl: airoha: add support of an7563 pin controller
  pinctrl: airoha: try to find chip scu node by phandle first
  pinctrl: airoha: add support of en7523 SoC
  dt-bindings: pinctrl: airoha: add support of en7523 pin controller
  pinctrl: airoha: an7583: add support for olt pinmux
  pinctrl: airoha: an7583: add support for pon_alt pinmux
  pinctrl: airoha: an7583: add support for npu_uart pinmux
  dt-bindings: pinctrl: airoha: an7583: add missed features
  ...

1 files changed, 307 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/utbuffer.c b/drivers/acpi/acpica/utbuffer.c
new file mode 100644
index 000000000..4193ceb93
--- /dev/null
+++ b/drivers/acpi/acpica/utbuffer.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/******************************************************************************
+ *
+ * Module Name: utbuffer - Buffer dump routines
+ *
+ * Copyright (C) 2000 - 2026, Intel Corp.
+ *
+ *****************************************************************************/
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utbuffer")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_dump_buffer
+ *
+ * PARAMETERS:  buffer              - Buffer to dump
+ *              count               - Amount to dump, in bytes
+ *              display             - BYTE, WORD, DWORD, or QWORD display:
+ *                                      DB_BYTE_DISPLAY
+ *                                      DB_WORD_DISPLAY
+ *                                      DB_DWORD_DISPLAY
+ *                                      DB_QWORD_DISPLAY
+ *              base_offset         - Beginning buffer offset (display only)
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Generic dump buffer in both hex and ascii.
+ *
+ ******************************************************************************/
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
+{
+	u32 i = 0;
+	u32 j;
+	u32 temp32;
+	u8 buf_char;
+	u32 display_data_only = display & DB_DISPLAY_DATA_ONLY;
+
+	display &= ~DB_DISPLAY_DATA_ONLY;
+	if (!buffer) {
+		acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
+		return;
+	}
+
+	if ((count < 4) || (count & 0x01)) {
+		display = DB_BYTE_DISPLAY;
+	}
+
+	/* Nasty little dump buffer routine! */
+
+	while (i < count) {
+
+		/* Print current offset */
+
+		if (!display_data_only) {
+			acpi_os_printf("%8.4X: ", (base_offset + i));
+		}
+
+		/* Print 16 hex chars */
+
+		for (j = 0; j < 16;) {
+			if (i + j >= count) {
+
+				/* Dump fill spaces */
+
+				acpi_os_printf("%*s", ((display * 2) + 1), " ");
+				j += display;
+				continue;
+			}
+
+			switch (display) {
+			case DB_BYTE_DISPLAY:
+			default:	/* Default is BYTE display */
+
+				acpi_os_printf("%02X ",
+					       buffer[(acpi_size)i + j]);
+				break;
+
+			case DB_WORD_DISPLAY:
+
+				ACPI_MOVE_16_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j]);
+				acpi_os_printf("%04X ", temp32);
+				break;
+
+			case DB_DWORD_DISPLAY:
+
+				ACPI_MOVE_32_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j]);
+				acpi_os_printf("%08X ", temp32);
+				break;
+
+			case DB_QWORD_DISPLAY:
+
+				ACPI_MOVE_32_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j]);
+				acpi_os_printf("%08X", temp32);
+
+				ACPI_MOVE_32_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j +
+							   4]);
+				acpi_os_printf("%08X ", temp32);
+				break;
+			}
+
+			j += display;
+		}
+
+		/*
+		 * Print the ASCII equivalent characters but watch out for the bad
+		 * unprintable ones (printable chars are 0x20 through 0x7E)
+		 */
+		if (!display_data_only) {
+			acpi_os_printf(" ");
+			for (j = 0; j < 16; j++) {
+				if (i + j >= count) {
+					acpi_os_printf("\n");
+					return;
+				}
+
+				/*
+				 * Add comment characters so rest of line is ignored when
+				 * compiled
+				 */
+				if (j == 0) {
+					acpi_os_printf("// ");
+				}
+
+				buf_char = buffer[(acpi_size)i + j];
+				if (isprint(buf_char)) {
+					acpi_os_printf("%c", buf_char);
+				} else {
+					acpi_os_printf(".");
+				}
+			}
+
+			/* Done with that line. */
+
+			acpi_os_printf("\n");
+		}
+		i += 16;
+	}
+
+	return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_debug_dump_buffer
+ *
+ * PARAMETERS:  buffer              - Buffer to dump
+ *              count               - Amount to dump, in bytes
+ *              display             - BYTE, WORD, DWORD, or QWORD display:
+ *                                      DB_BYTE_DISPLAY
+ *                                      DB_WORD_DISPLAY
+ *                                      DB_DWORD_DISPLAY
+ *                                      DB_QWORD_DISPLAY
+ *              component_ID        - Caller's component ID
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Generic dump buffer in both hex and ascii.
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
+{
+
+	/* Only dump the buffer if tracing is enabled */
+
+	if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
+	      (component_id & acpi_dbg_layer))) {
+		return;
+	}
+
+	acpi_ut_dump_buffer(buffer, count, display, 0);
+}
+
+#ifdef ACPI_APPLICATION
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_dump_buffer_to_file
+ *
+ * PARAMETERS:  file                - File descriptor
+ *              buffer              - Buffer to dump
+ *              count               - Amount to dump, in bytes
+ *              display             - BYTE, WORD, DWORD, or QWORD display:
+ *                                      DB_BYTE_DISPLAY
+ *                                      DB_WORD_DISPLAY
+ *                                      DB_DWORD_DISPLAY
+ *                                      DB_QWORD_DISPLAY
+ *              base_offset         - Beginning buffer offset (display only)
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Generic dump buffer in both hex and ascii to a file.
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_dump_buffer_to_file(ACPI_FILE file,
+			    u8 *buffer, u32 count, u32 display, u32 base_offset)
+{
+	u32 i = 0;
+	u32 j;
+	u32 temp32;
+	u8 buf_char;
+
+	if (!buffer) {
+		fprintf(file, "Null Buffer Pointer in DumpBuffer!\n");
+		return;
+	}
+
+	if ((count < 4) || (count & 0x01)) {
+		display = DB_BYTE_DISPLAY;
+	}
+
+	/* Nasty little dump buffer routine! */
+
+	while (i < count) {
+
+		/* Print current offset */
+
+		fprintf(file, "%8.4X: ", (base_offset + i));
+
+		/* Print 16 hex chars */
+
+		for (j = 0; j < 16;) {
+			if (i + j >= count) {
+
+				/* Dump fill spaces */
+
+				fprintf(file, "%*s", ((display * 2) + 1), " ");
+				j += display;
+				continue;
+			}
+
+			switch (display) {
+			case DB_BYTE_DISPLAY:
+			default:	/* Default is BYTE display */
+
+				fprintf(file, "%02X ",
+					buffer[(acpi_size)i + j]);
+				break;
+
+			case DB_WORD_DISPLAY:
+
+				ACPI_MOVE_16_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j]);
+				fprintf(file, "%04X ", temp32);
+				break;
+
+			case DB_DWORD_DISPLAY:
+
+				ACPI_MOVE_32_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j]);
+				fprintf(file, "%08X ", temp32);
+				break;
+
+			case DB_QWORD_DISPLAY:
+
+				ACPI_MOVE_32_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j]);
+				fprintf(file, "%08X", temp32);
+
+				ACPI_MOVE_32_TO_32(&temp32,
+						   &buffer[(acpi_size)i + j +
+							   4]);
+				fprintf(file, "%08X ", temp32);
+				break;
+			}
+
+			j += display;
+		}
+
+		/*
+		 * Print the ASCII equivalent characters but watch out for the bad
+		 * unprintable ones (printable chars are 0x20 through 0x7E)
+		 */
+		fprintf(file, " ");
+		for (j = 0; j < 16; j++) {
+			if (i + j >= count) {
+				fprintf(file, "\n");
+				return;
+			}
+
+			buf_char = buffer[(acpi_size)i + j];
+			if (isprint(buf_char)) {
+				fprintf(file, "%c", buf_char);
+			} else {
+				fprintf(file, ".");
+			}
+		}
+
+		/* Done with that line. */
+
+		fprintf(file, "\n");
+		i += 16;
+	}
+
+	return;
+}
+#endif