Merge tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linuxgrafted

Pull I3C updates from Alexandre Belloni:
 "A new driver this cycle, for the AMD AXI I3C controller.

  There are also new features such as IBI wakeup support, SETAASA device
  discovery and ACPI support for the the DAA methods, meaning we can now
  communicate with the SPD devices on DDR5 modules.

  New driver:
   - AMD AXI I3C master controller

  Subsystem:
   - I3C Common Command Code (CCC) handling improvements, especially
     around GET CCCs
   - SETAASA device discovery support
   - ACPI support for all existing DAA methods like SETDASA, SETNEWDA as
     well as I2C devices on I3C bus
   - IBI-based wakeup support

  Drivers:
   - dw: SETAASA support
   - mipi-i3c-hci: advertise IBI wakeup capability, AMD_PT I3C
     controller support, PIO queue management support for HCI v1.2
   - renesas: improve suspend to RAM support, add runtime PM support"

* tag 'i3c/for-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (70 commits)
  i3c: dw: reduce do_daa time if there's no client
  i3c: mipi-i3c-hci: Add support for AMD_PT I3C controller
  i3c: mipi-i3c-hci: Add PIO queue management support for HCI v1.2
  i3c: mipi-i3c-hci: Fix missing STAT_IBI_STATUS_THLD in PIO mode
  i3c: dw: rename "pclk" to "apb" to match dt-binding
  i3c: dw: make struct dw_i3c_cmd smaller
  i3c: dw: use COMMAND_PORT_TRANSFER_ARG instead of hardcoding
  i3c: renesas: Don't register devices when ENTDAA times out
  i3c: master: dw-i3c-master: fix OD timing for first broadcast
  i3c: mipi-i3c-hci: Advertise IBI wakeup capability
  i3c: mipi-i3c-hci: Factor out i3c_hci_sysdev()
  i3c: mipi-i3c-hci-pci: Propagate I3C wakeup requirements to PCI
  i3c: master: Reject IBI requests from non-IBI-capable devices
  i3c: master: Add helper to query bus wakeup requirements
  i3c: master: Report wakeup events for IBIs
  i3c: master: Support IBI-based wakeup capability
  i3c: master: Fix potential UAF in i3c_device_match()
  i3c: master: Fix potential UAF in i3c_device_uevent()
  i3c: Make dev->desc locking assumptions explicit
  i3c: master: Fix use-after-free of master->this
  ...

1 files changed, 318 insertions, 0 deletions

diff --git a/drivers/accessibility/speakup/serialio.c b/drivers/accessibility/speakup/serialio.c
new file mode 100644
index 000000000..3418ea31d
--- /dev/null
+++ b/drivers/accessibility/speakup/serialio.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include "spk_types.h"
+#include "speakup.h"
+#include "spk_priv.h"
+#include "serialio.h"
+
+#include <linux/serial_core.h>
+/* WARNING:  Do not change this to <linux/serial.h> without testing that
+ * SERIAL_PORT_DFNS does get defined to the appropriate value.
+ */
+#include <asm/serial.h>
+
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static void start_serial_interrupt(int irq);
+
+static const struct old_serial_port rs_table[] = {
+	SERIAL_PORT_DFNS
+};
+
+static const struct old_serial_port *serstate;
+static int timeouts;
+
+static int spk_serial_out(struct spk_synth *in_synth, const char ch);
+static void spk_serial_send_xchar(struct spk_synth *in_synth, char ch);
+static void spk_serial_tiocmset(struct spk_synth *in_synth, unsigned int set, unsigned int clear);
+static unsigned char spk_serial_in(struct spk_synth *in_synth);
+static unsigned char spk_serial_in_nowait(struct spk_synth *in_synth);
+static void spk_serial_flush_buffer(struct spk_synth *in_synth);
+static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth);
+
+struct spk_io_ops spk_serial_io_ops = {
+	.synth_out = spk_serial_out,
+	.send_xchar = spk_serial_send_xchar,
+	.tiocmset = spk_serial_tiocmset,
+	.synth_in = spk_serial_in,
+	.synth_in_nowait = spk_serial_in_nowait,
+	.flush_buffer = spk_serial_flush_buffer,
+	.wait_for_xmitr = spk_serial_wait_for_xmitr,
+};
+EXPORT_SYMBOL_GPL(spk_serial_io_ops);
+
+const struct old_serial_port *spk_serial_init(int index)
+{
+	int baud = 9600, quot = 0;
+	unsigned int cval = 0;
+	int cflag = CREAD | HUPCL | CLOCAL | B9600 | CS8;
+	const struct old_serial_port *ser;
+	int err;
+
+	if (index >= ARRAY_SIZE(rs_table)) {
+		pr_info("no port info for ttyS%d\n", index);
+		return NULL;
+	}
+	ser = rs_table + index;
+
+	/*	Divisor, byte size and parity */
+	quot = ser->baud_base / baud;
+	cval = cflag & (CSIZE | CSTOPB);
+#if defined(__powerpc__) || defined(__alpha__)
+	cval >>= 8;
+#else /* !__powerpc__ && !__alpha__ */
+	cval >>= 4;
+#endif /* !__powerpc__ && !__alpha__ */
+	if (cflag & PARENB)
+		cval |= UART_LCR_PARITY;
+	if (!(cflag & PARODD))
+		cval |= UART_LCR_EPAR;
+	if (synth_request_region(ser->port, 8)) {
+		/* try to take it back. */
+		pr_info("Ports not available, trying to steal them\n");
+		__release_region(&ioport_resource, ser->port, 8);
+		err = synth_request_region(ser->port, 8);
+		if (err) {
+			pr_warn("Unable to allocate port at %x, errno %i",
+				ser->port, err);
+			return NULL;
+		}
+	}
+
+	/*	Disable UART interrupts, set DTR and RTS high
+	 *	and set speed.
+	 */
+	outb(cval | UART_LCR_DLAB, ser->port + UART_LCR);	/* set DLAB */
+	outb(quot & 0xff, ser->port + UART_DLL);	/* LS of divisor */
+	outb(quot >> 8, ser->port + UART_DLM);		/* MS of divisor */
+	outb(cval, ser->port + UART_LCR);		/* reset DLAB */
+
+	/* Turn off Interrupts */
+	outb(0, ser->port + UART_IER);
+	outb(UART_MCR_DTR | UART_MCR_RTS, ser->port + UART_MCR);
+
+	/* If we read 0xff from the LSR, there is no UART here. */
+	if (inb(ser->port + UART_LSR) == 0xff) {
+		synth_release_region(ser->port, 8);
+		serstate = NULL;
+		return NULL;
+	}
+
+	mdelay(1);
+	speakup_info.port_tts = ser->port;
+	serstate = ser;
+
+	start_serial_interrupt(ser->irq);
+
+	return ser;
+}
+
+static irqreturn_t synth_readbuf_handler(int irq, void *dev_id)
+{
+	unsigned long flags;
+	int c;
+
+	spin_lock_irqsave(&speakup_info.spinlock, flags);
+	while (inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR) {
+		c = inb_p(speakup_info.port_tts + UART_RX);
+		synth->read_buff_add((u_char)c);
+	}
+	spin_unlock_irqrestore(&speakup_info.spinlock, flags);
+	return IRQ_HANDLED;
+}
+
+static void start_serial_interrupt(int irq)
+{
+	int rv;
+
+	if (!synth->read_buff_add)
+		return;
+
+	rv = request_irq(irq, synth_readbuf_handler, IRQF_SHARED,
+			 "serial", (void *)synth_readbuf_handler);
+
+	if (rv)
+		pr_err("Unable to request Speakup serial I R Q\n");
+	/* Set MCR */
+	outb(UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2,
+	     speakup_info.port_tts + UART_MCR);
+	/* Turn on Interrupts */
+	outb(UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI,
+	     speakup_info.port_tts + UART_IER);
+	inb(speakup_info.port_tts + UART_LSR);
+	inb(speakup_info.port_tts + UART_RX);
+	inb(speakup_info.port_tts + UART_IIR);
+	inb(speakup_info.port_tts + UART_MSR);
+	outb(1, speakup_info.port_tts + UART_FCR);	/* Turn FIFO On */
+}
+
+static void spk_serial_send_xchar(struct spk_synth *synth, char ch)
+{
+	int timeout = SPK_XMITR_TIMEOUT;
+
+	while (spk_serial_tx_busy()) {
+		if (!--timeout)
+			break;
+		udelay(1);
+	}
+	outb(ch, speakup_info.port_tts);
+}
+
+static void spk_serial_tiocmset(struct spk_synth *in_synth, unsigned int set, unsigned int clear)
+{
+	int old = inb(speakup_info.port_tts + UART_MCR);
+
+	outb((old & ~clear) | set, speakup_info.port_tts + UART_MCR);
+}
+
+int spk_serial_synth_probe(struct spk_synth *synth)
+{
+	const struct old_serial_port *ser;
+	int failed = 0;
+
+	if ((synth->ser >= SPK_LO_TTY) && (synth->ser <= SPK_HI_TTY)) {
+		ser = spk_serial_init(synth->ser);
+		if (!ser) {
+			failed = -1;
+		} else {
+			outb_p(0, ser->port);
+			mdelay(1);
+			outb_p('\r', ser->port);
+		}
+	} else {
+		failed = -1;
+		pr_warn("ttyS%i is an invalid port\n", synth->ser);
+	}
+	if (failed) {
+		pr_info("%s: not found\n", synth->long_name);
+		return -ENODEV;
+	}
+	pr_info("%s: ttyS%i, Driver Version %s\n",
+		synth->long_name, synth->ser, synth->version);
+	synth->alive = 1;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spk_serial_synth_probe);
+
+void spk_stop_serial_interrupt(void)
+{
+	if (speakup_info.port_tts == 0)
+		return;
+
+	if (!synth->read_buff_add)
+		return;
+
+	/* Turn off interrupts */
+	outb(0, speakup_info.port_tts + UART_IER);
+	/* Free IRQ */
+	free_irq(serstate->irq, (void *)synth_readbuf_handler);
+}
+EXPORT_SYMBOL_GPL(spk_stop_serial_interrupt);
+
+static int spk_serial_wait_for_xmitr(struct spk_synth *in_synth)
+{
+	int tmout = SPK_XMITR_TIMEOUT;
+
+	if ((in_synth->alive) && (timeouts >= NUM_DISABLE_TIMEOUTS)) {
+		pr_warn("%s: too many timeouts, deactivating speakup\n",
+			in_synth->long_name);
+		in_synth->alive = 0;
+		/* No synth any more, so nobody will restart TTYs, and we thus
+		 * need to do it ourselves.  Now that there is no synth we can
+		 * let application flood anyway
+		 */
+		speakup_start_ttys();
+		timeouts = 0;
+		return 0;
+	}
+	while (spk_serial_tx_busy()) {
+		if (--tmout == 0) {
+			pr_warn("%s: timed out (tx busy)\n",
+				in_synth->long_name);
+			timeouts++;
+			return 0;
+		}
+		udelay(1);
+	}
+	tmout = SPK_CTS_TIMEOUT;
+	while (!((inb_p(speakup_info.port_tts + UART_MSR)) & UART_MSR_CTS)) {
+		/* CTS */
+		if (--tmout == 0) {
+			timeouts++;
+			return 0;
+		}
+		udelay(1);
+	}
+	timeouts = 0;
+	return 1;
+}
+
+static unsigned char spk_serial_in(struct spk_synth *in_synth)
+{
+	int tmout = SPK_SERIAL_TIMEOUT;
+
+	while (!(inb_p(speakup_info.port_tts + UART_LSR) & UART_LSR_DR)) {
+		if (--tmout == 0) {
+			pr_warn("time out while waiting for input.\n");
+			return 0xff;
+		}
+		udelay(1);
+	}
+	return inb_p(speakup_info.port_tts + UART_RX);
+}
+
+static unsigned char spk_serial_in_nowait(struct spk_synth *in_synth)
+{
+	unsigned char lsr;
+
+	lsr = inb_p(speakup_info.port_tts + UART_LSR);
+	if (!(lsr & UART_LSR_DR))
+		return 0;
+	return inb_p(speakup_info.port_tts + UART_RX);
+}
+
+static void spk_serial_flush_buffer(struct spk_synth *in_synth)
+{
+	/* TODO: flush the UART 16550 buffer */
+}
+
+static int spk_serial_out(struct spk_synth *in_synth, const char ch)
+{
+	if (in_synth->alive && spk_serial_wait_for_xmitr(in_synth)) {
+		outb_p(ch, speakup_info.port_tts);
+		return 1;
+	}
+	return 0;
+}
+
+const char *spk_serial_synth_immediate(struct spk_synth *synth,
+				       const char *buff)
+{
+	u_char ch;
+
+	while ((ch = *buff)) {
+		if (ch == '\n')
+			ch = synth->procspeech;
+		if (spk_serial_wait_for_xmitr(synth))
+			outb(ch, speakup_info.port_tts);
+		else
+			return buff;
+		buff++;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(spk_serial_synth_immediate);
+
+void spk_serial_release(struct spk_synth *synth)
+{
+	spk_stop_serial_interrupt();
+	if (speakup_info.port_tts == 0)
+		return;
+	synth_release_region(speakup_info.port_tts, 8);
+	speakup_info.port_tts = 0;
+}
+EXPORT_SYMBOL_GPL(spk_serial_release);